[sane-devel] FreeBSD 5.1R, SANE, Canon 1240U scanner

[Doug Carter]

Allan,


1. Double checking the man page for plustek, I find my scanner:

sane-plustek(5) 	 SANE Scanner Access Now Easy	       sane-plustek(5)

       Vendor CANON - ID: 0x04A9
       ----------------------------------------------------------
       USB Model:	  ASIC:  Properties:		  Prod-ID
       ----------------------------------------------------------
       CanoScan N1240U	  LM9833 1200x2400dpi 48bit 512Kb 0x220E

2. I make sure its plugged in to the usb port.

3. #SANE_DEBUG_PLUSTEK=255;export SANE_DEBUG_PLUSTEK
4. #scanimage -L 2&> logfile

and I get:

[plustek] Plustek backend V0.46-9, part of sane-backends 1.0.13

<snip, a bunch of stuff that I don't think matters at this point>

[plustek] drvopen()
[plustek] usbDev_open(auto,0x04A9-0x220E)
[plustek] Found device at >libusb:/dev/usb0:/dev/ugen0<
[plustek] Vendor ID=0x04A9, Product ID=0x220E
[plustek] usbio_DetectLM983x
[plustek] UIO error
[plustek] This is not a LM9831 or LM9832 chip based scanner.
[plustek] open failed: -1
[plustek] sane_get_devices (0xbfbff3e8, 0)
[plustek] sane_exit

... so, perhaps the scanner is not supported despite the man page entry?
Or, I notice it refers to LM9831 & LM9832 but not LM9833 which the
table notes for this scanner...

Doug

_________________________________________________________________
Click here for a FREE online computer virus scan from McAfee. 
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963