[sane-devel] Boeder SmartScan Slim Edition on SuSE

[Henning Meier-Geinitz]

Hi,

On Tue, Feb 10, 2004 at 07:21:34PM -0000, Jim George wrote:
> Thanks for your continued support with this.  Please find the log attached.

[...]

> [sanei_debug] Setting debug level of sanei_usb to 255.
> [sanei_usb] sanei_usb_init: couldn't open /dev/usbscanner: No such device
> [sanei_usb] sanei_usb_init: couldn't open /dev/usb/scanner0: No such device
> [sanei_usb] sanei_usb_init: couldn't open /dev/usb/scanner1: No such device
> [sanei_usb] sanei_usb_init: couldn't open /dev/usb/scanner2: No such device
> [sanei_usb] sanei_usb_init: couldn't open /dev/usb/scanner3: No such device
> [sanei_usb] sanei_usb_init: couldn't open /dev/usb/scanner4: No such device
> [sanei_usb] sanei_usb_init: couldn't open /dev/usb/scanner5: No such device
> [sanei_usb] sanei_usb_init: couldn't open /dev/usb/scanner6: No such device
> [sanei_usb] sanei_usb_init: couldn't open /dev/usb/scanner7: No such device
> [sanei_usb] sanei_usb_init: found 0 devices

No libusb support in this backend This is how it looks like with
libusb support:

[...]
[sanei_usb] sanei_usb_init: couldn't open /dev/usb/scanner14: No such device
[sanei_usb] sanei_usb_init: couldn't open /dev/usb/scanner15: No such device
usb_os_init: Found USB VFS at /proc/bus/usb
usb_set_debug: Setting debugging level to 255 (on)
[sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub
[sanei_usb] sanei_usb_init: device 0x03f0/0x6004, interface 0 doesn't look like a scanner (0/7)
[sanei_usb] sanei_usb_init: device 0x03f0/0x6004: no suitable interfaces
[sanei_usb] sanei_usb_init: device 0x05e3/0x0604, interface 0 doesn't look like a scanner (9/9)
[sanei_usb] sanei_usb_init: device 0x05e3/0x0604: no suitable interfaces
[sanei_usb] sanei_usb_init: found libusb device (0x05d8/0x4002) interface 0  at libusb:001:006
[sanei_usb] sanei_usb_init: found 1 devices


Bye,
  Henning