[sane-devel] scanimage cannot see Umax Astra 2100S scanner.

Russ Pitman rjp at belle.apana.org.au
Fri Feb 13 01:49:21 GMT 2004


abel deuring wrote:
--Snip--
> > [umax] reading 2983500 bytes in blocks of 84150 bytes
> > [umax] wait_scanner
> > [umax] scanner reports Error during device I/O, waiting ...
> > 
> 
> Russ,
> 
> could you run another test, this time with both SANE_DEBUG_UMAX and
> SANE_DEBUG_SANEI_SCSI set to 255? This will give us probably better
> clue, what is going wrong.
> 

Hi,Abel,
Did that and got nothing. To clarify that bald statement I attach a
screendump of the session.

Hope this helps.
-- 
Cheers
Russ.

-------------- next part --------------
scsi singledevice 1 0 3 0
root at belle:~# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: ASUS     Model: CRW-4012A        Rev: 1.0
  Type:   CD-ROM                           ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 03 Lun: 00
  Vendor: UMAX     Model: Astra 2100S      Rev: V1.1
  Type:   Scanner                          ANSI SCSI revision: 02
root at belle:~# SANE_DEBUG_UMAX=255
root at belle:~# SANE_DEBUG_SANEI_SCSI=255
root at belle:~# sane-find-scanner

found SCSI scanner "UMAX Astra 2100S V1.1" at /dev/scanner
found SCSI scanner "UMAX Astra 2100S V1.1" at /dev/sg1
  # Your SCSI scanner was detected. It may or may not be supported by SANE. Try
  # scanimage -L and read the backend's manpage.

  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a driver for your USB host controller and have installed a
  # kernel scanner module.

  # Scanners connected to the parallel port or other proprietary ports can't be
  # detected by this program.
root at belle:~# cdrecord -scanbus
Cdrecord 2.01a07 (i686-pc-linux-gnu) Copyright (C) 1995-2003 J?rg Schilling
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
scsibus0:
        0,0,0     0) 'ASUS    ' 'CRW-4012A       ' '1.0 ' Removable CD-ROM
        0,1,0     1) *
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *
scsibus1:
        1,0,0   100) *
        1,1,0   101) *
        1,2,0   102) *
        1,3,0   103) 'UMAX    ' 'Astra 2100S     ' 'V1.1' Scanner
        1,4,0   104) *
        1,5,0   105) *
        1,6,0   106) *
        1,7,0   107) *
root at belle:~# screendump > scantest



More information about the sane-devel mailing list