[sane-devel] scanimage cannot see Umax Astra 2100S scanner.

[Oliver Rauch]

Am Freitag, 13. Februar 2004 13:01 schrieb Russ Pitman:
> abel deuring wrote:
> > Russ,
> > These nearly the comamnd I meant ;) But I'd like to see the _combined_
> > output from SANE_DEBUG_UMAX and SANE_DEBUG_SANEI_SCSI, so the command
> > would be:
> >
> > SANE_DEBUG_UMAX=255 SANE_DEBUG_SANEI_SCSI=255 scanimage -d
> > umax:/dev/scanner
>
> Okay fine.
>
> > SANE_DEBUG_UMAX=255 SANE_DEBUG_SANEI_SCSI=255 scanimage -d
> > umax:/dev/scanner 2> debug.txt
>
> Maybe someone else has an interest,and you are right. It isn't so big after
> all.

Hello Russ,

you removed almost all comments in the default umax.conf file (see attached 
part of your log). This is really bad. Please use the original umax.conf 
file, this should work.

Oliver

The relevant part of your logfile:

[sanei_scsi] sanei_scsi_open: open of `Options for the umax backend' failed: 
No such file or directory
[umax] ERROR: attach_scanner: opening scsi device Options for the umax backend 
failed
[umax] option scsi-maxqueue = 2
[umax] option scsi-buffer-size-min = 65536
[umax] option scsi-buffer-size-max = 262144
[umax] option scan-lines = 100
[umax] option preview-lines = 20
[umax] option handle-bad-sense-error = 0
[umax] option execute-request-sense = 0
[umax] option force-preview-bit-rgb = 0
[umax] option slow-speed = 0
[umax] option care-about-smearing = 0
[umax] option calibration-full-ccd = 1
[umax] option calibration-width-offset = -99999
[umax] option calibration-bytes-pixel = -1
[umax] option exposure-time-rgb-bind = 0
[umax] option invert-shading-data = 0
[umax] option lamp-control-available = 0
[umax] option gamma-lsb-padded = 0
[umax] option connection-type = 1
[umax] attach_scanner: /dev/sg1, connection_type 1
[umax] attach_scanner: opening scsi device /dev/sg1

-- 
http://www.xsane.org
http://www.rauch-domain.de
http://www.sane-project.org