[sane-devel] Re: scanner not recognised part II

[Karl Heinz Kremer]

According to your boot messages, it was loaded at boot time. Something 
must have
unloaded it. I have no idea why this happens. Usually, the driver 
should not get
unloaded automatically.

Check to see if you have this entry in your /etc/modules.conf file:
alias scsi_hostadapter fdomain

If not, try to add it and see if this makes a difference.


On Feb 29, 2004, at 6:04 PM, Paul Frisson wrote:

> Whoooof ! It worked !!!! :-)))))
>
> Many many thanks, and one last stupid question, where and what must be 
> changed
> in order to load the driver at boot, not to have to retype the load 
> command ?
>
> Thank you again, I feel much better !
>
> PF
>
>
> Le Dimanche 29 Février 2004 23:48, Karl Heinz Kremer a écrit :
>> The script does not list your Adaptec controller... Can you verify 
>> that
>> the driver for
>> your controller is still loaded:
>>
>> cat /proc/modules | grep fdomain
>>
>> If this does not print anything, try to manually load it:
>> /sbin/modprobe fdomain
>