Fw: [sane-devel] mustek_pp trouble

[Jim George]

Re: [sane-devel] mustek_pp trouble
----- Original Message ----- 
From: jim.george at blueyonder.co.uk 
To: jochen at penguin-breeder.org 
Cc: jim.george at blueyonder.co.uk ; sane-devel at lists.alioth.debian.org 
Sent: Friday, January 02, 2004 8:25 PM
Subject: Re: [sane-devel] mustek_pp trouble


> Hi,
>
> Jim George wrote:
>> [sanei_pa4s2] sanei_pa4s2_open: could not find scanner
>> [sanei_pa4s2] sanei_pa4s2_open: reported ASIC id 0xb5
> this looks like the backend couldn't find your scanner (0xa5 would =ave
> been a valid ID for example)
>
>> [sanei_pa4s2] sanei_pa4s2_enable: called for fd 0 with value =
>> [sanei_pa4s2] sanei_pa4s2_enable: disable port 'parport0'
> here the port is released again (at least it should be)
>
> can you actually scan with SANE and your scanner? This looks all =ery
> strange to me...
>
> regards
> -- jochen
Jochen,

yes I have been able to scan but after an apparently sucessful scan =he
parallel port locks up (such that I can neither scan again nor print =gain
until I have rebooted).

I have sent logs up previously that Henning took a look at before
suggesting that you or Eddy might be able to help.  Eddy has asked =e to
install gdb (if I have the room on my very small system) and run it =gain
and send the output up.  I'll do this some time over the weekend =I've
literally just got back off holiday though so it'll take a couple of =ays
to get myself settled).

Thanks for your interest.

Jim







) 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/sane-devel/attachments/20040104/c2e0b108/attachment.htm>