[sane-devel] re epson percection 1200 problems libusb kernel 2.6.1-rc1
Lm Cogs
leoncogs at eircom.net
Sun Jan 18 18:35:55 GMT 2004
Well Its a success at last
I tried without smp amd preemting complied but it was no success, then as you
suggeste I looked in var/log/messages. and it seemed to suggest that it was
looking for a module usbcore. I recompiled the kernel with a the option for
'support for usb' chosen to be compiled as a module. The scanner now works.
I used xsane and all went well. I also change a line in fstab but I don't
think this made a difference.
When I get time I will try recompiling the kernel with 'preemptible kernel', I
don't think I need smp.
I would appeciate it if you take a look at my fstab and var/log/message files
below
I guess I don't need to set permission in epson_scanner if I set it in fstab
globally. Another question where do I go to set up libusb and epson printer,
it works if i modprobe usblp and then set it up in Yast?
fstab
/dev/hdc1 / ext2 defaults 1 1
/dev/hdc2 /home ext2 defaults 1 2
/dev/hdc3 swap swap pri=42 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
proc /proc proc defaults 0 0
none /proc/bus/usb usbfs devmode=0666 0 0
usbfs /proc/bus/usb usbfs defautls,noauto 0 0
/dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0
/dev/dvd /media/dvd auto ro,noauto,user,exec 0 0
/dev/fd0 /media/floppy auto noauto,user,sync 0 0
/dev/sr0 /media/sr0 auto ro,noauto,user,exec 0 0
/dev/sda1 /media/sda1 auto sync,noauto,user,exec 0 0
/var/log/messages
Jan 18 16:35:33 desktop syslogd 1.4.1: restart.
Jan 18 16:35:35 desktop /sbin/hotplug[692]: no runnable /etc/hotplug/
usb_host.agent is installed
Jan 18 16:35:35 desktop /etc/hotplug/usb.rc[681]: loaded HCD: ehci-hcd
Jan 18 16:35:35 desktop /etc/hotplug/usb.rc[681]: loaded HCD: ohci-hcd
Jan 18 16:35:35 desktop /sbin/hotplug[733]: no runnable /etc/hotplug/
usb_host.agent is installed
Jan 18 16:35:35 desktop /sbin/hotplug[772]: no runnable /etc/hotplug/
usb_host.agent is installed
Jan 18 16:35:35 desktop /sbin/hotplug[811]: no runnable /etc/hotplug/
usb_host.agent is installed
Jan 18 16:35:35 desktop /etc/hotplug/usb.rc[681]: loaded HCD: uhci-hcd
Jan 18 16:35:35 desktop /etc/hotplug/usb.rc[681]: loaded HCD: ehci-hcd
Jan 18 16:35:35 desktop /etc/hotplug/usb.rc[681]: FATAL: Module mousedev not
found.
Jan 18 16:35:35 desktop /etc/hotplug/usb.rc[681]: FATAL: Module keybdev not
found.
Jan 18 16:35:35 desktop /etc/hotplug/usb.rc[681]: FATAL: Module printer not
found.
Jan 18 16:35:38 desktop /etc/hotplug/usb.agent[895]: Bad USB agent invocation
Jan 18 16:35:38 desktop kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jan 18 16:35:38 desktop kernel: Inspecting /boot/System.map-2.6.1-rc1
Jan 18 16:35:38 desktop kernel: Loaded 24789 symbols from /boot/
System.map-2.6.1-rc1.
Jan 18 16:35:38 desktop kernel: Symbols match kernel version 2.6.1.
Jan 18 16:35:38 desktop kernel: No module symbols loaded - kernel modules not
enabled.
Jan 18 16:35:38 desktop kernel: eth0: link down
Jan 18 16:35:38 desktop kernel: NET: Registered protocol family 17
Jan 18 16:35:38 desktop kernel: raw1394: /dev/raw1394 device initialized
Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: registered new driver
usbfs
Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: registered new driver
hub
Jan 18 16:35:38 desktop kernel: ehci_hcd: block sizes: qh 128 qtd 96 itd 128
sitd 64
Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: EHCI Host Controller
Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: reset hcs_params 0x3206
dbg=0 cc=3 pcc=2 ordered !ppc ports=6
Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: reset hcc_params 6872
thresh 7 uframes 256/512/1024
Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: capability 0001 at 68
Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: irq 21, pci mem
e089d000
Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: new USB bus registered,
assigned bus number 1
Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: reset command 080002
(park)=0 ithresh=8 period=1024 Reset HALT
Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: init command 010009
(park)=0 ithresh=1 period=256 RUN
Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI
1.00, driver 2003-Jun-13
Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: root hub device address
1
Jan 18 16:35:38 desktop kernel: usb usb1: new device strings: Mfr=3,
Product=2, SerialNumber=1
Jan 18 16:35:38 desktop kernel: drivers/usb/core/message.c: USB device number
1 default language ID 0x409
Jan 18 16:35:38 desktop kernel: usb usb1: Product: EHCI Host Controller
Jan 18 16:35:38 desktop kernel: usb usb1: Manufacturer: Linux 2.6.1-rc1
ehci_hcd
Jan 18 16:35:38 desktop kernel: usb usb1: SerialNumber: 0000:00:10.3
Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:35:38 desktop kernel: usb usb1: registering 1-0:1.0 (config #1,
interface 0)
Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: usb_probe_interface
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: usb_probe_interface - got id
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: USB hub found
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: 6 ports detected
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: standalone hub
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: ganged power switching
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: individual port over-current
protection
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: Single TT
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: TT requires at most 8 FS bit
times
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: Port indicators are not supported
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: power on to power good time: 0ms
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: hub controller current
requirement: 0mA
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: local power source is good
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: no over-current condition exists
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: enabling power on all ports
Jan 18 16:35:38 desktop kernel: ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host
Controller (OHCI) Driver (PCI)
Jan 18 16:35:38 desktop kernel: ohci_hcd: block sizes: ed 64 td 64
Jan 18 16:35:38 desktop kernel: drivers/usb/host/uhci-hcd.c: USB Universal
Host Controller Interface driver v2.1
Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller
Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.0: irq 21, io base
0000d400
Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.0: new USB bus registered,
assigned bus number 2
Jan 18 16:35:38 desktop kernel: drivers/usb/host/uhci-hcd.c: detected 2 ports
Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.0: root hub device address
1
Jan 18 16:35:38 desktop kernel: usb usb2: new device strings: Mfr=3,
Product=2, SerialNumber=1
Jan 18 16:35:38 desktop kernel: drivers/usb/core/message.c: USB device number
1 default language ID 0x409
Jan 18 16:35:38 desktop kernel: usb usb2: Product: UHCI Host Controller
Jan 18 16:35:38 desktop kernel: usb usb2: Manufacturer: Linux 2.6.1-rc1
uhci_hcd
Jan 18 16:35:38 desktop kernel: usb usb2: SerialNumber: 0000:00:10.0
Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:35:38 desktop kernel: usb usb2: registering 2-0:1.0 (config #1,
interface 0)
Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: usb_probe_interface
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: usb_probe_interface - got id
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: USB hub found
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: 2 ports detected
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: standalone hub
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: ganged power switching
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: global over-current protection
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: Port indicators are not supported
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: power on to power good time: 2ms
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: hub controller current
requirement: 0mA
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: local power source is good
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: no over-current condition exists
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: enabling power on all ports
Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller
Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status
001803 POWER sig=j CSC CONNECT
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: port 5, status 501, change 1, 480
Mb/s
Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.1: irq 21, io base
0000d800
Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.1: new USB bus registered,
assigned bus number 3
Jan 18 16:35:38 desktop kernel: drivers/usb/host/uhci-hcd.c: detected 2 ports
Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.1: root hub device address
1
Jan 18 16:35:38 desktop kernel: usb usb3: new device strings: Mfr=3,
Product=2, SerialNumber=1
Jan 18 16:35:38 desktop kernel: drivers/usb/core/message.c: USB device number
1 default language ID 0x409
Jan 18 16:35:38 desktop kernel: usb usb3: Product: UHCI Host Controller
Jan 18 16:35:38 desktop kernel: usb usb3: Manufacturer: Linux 2.6.1-rc1
uhci_hcd
Jan 18 16:35:38 desktop kernel: usb usb3: SerialNumber: 0000:00:10.1
Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:35:38 desktop kernel: usb usb3: registering 3-0:1.0 (config #1,
interface 0)
Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: usb_probe_interface
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: usb_probe_interface - got id
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: USB hub found
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: 2 ports detected
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: standalone hub
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: ganged power switching
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: global over-current protection
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: Port indicators are not supported
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: power on to power good time: 2ms
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: hub controller current
requirement: 0mA
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: local power source is good
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: no over-current condition exists
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: enabling power on all ports
Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller
Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: debounce: port 5: delay 100ms
stable 4 status 0x501
Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.2: irq 21, io base
0000dc00
Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.2: new USB bus registered,
assigned bus number 4
Jan 18 16:35:38 desktop kernel: drivers/usb/host/uhci-hcd.c: detected 2 ports
Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.2: root hub device address
1
Jan 18 16:35:38 desktop kernel: usb usb4: new device strings: Mfr=3,
Product=2, SerialNumber=1
Jan 18 16:35:38 desktop kernel: drivers/usb/core/message.c: USB device number
1 default language ID 0x409
Jan 18 16:35:38 desktop kernel: usb usb4: Product: UHCI Host Controller
Jan 18 16:35:38 desktop kernel: usb usb4: Manufacturer: Linux 2.6.1-rc1
uhci_hcd
Jan 18 16:35:38 desktop kernel: usb usb4: SerialNumber: 0000:00:10.2
Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: port 5 full speed -->
companion
Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status
003801 POWER OWNER sig=j CONNECT
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: port 1, status 100, change 3, 12
Mb/s
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: port 2, status 100, change 3, 12
Mb/s
Jan 18 16:35:38 desktop kernel: usb usb4: registering 4-0:1.0 (config #1,
interface 0)
Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: usb_probe_interface
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: usb_probe_interface - got id
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: USB hub found
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: 2 ports detected
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: standalone hub
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: ganged power switching
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: global over-current protection
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: Port indicators are not supported
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: power on to power good time: 2ms
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: hub controller current
requirement: 0mA
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: local power source is good
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: no over-current condition exists
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: enabling power on all ports
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: port 1, status 100, change 3, 12
Mb/s
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: port 2, status 100, change 3, 12
Mb/s
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: port 1 enable change, status 100
Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: port 2 enable change, status 100
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: port 1, status 101, change 3, 12
Mb/s
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: debounce: port 1: delay 100ms
stable 4 status 0x101
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: new USB device on port 1,
assigned address 2
Jan 18 16:35:38 desktop kernel: usb 4-1: new device strings: Mfr=1, Product=2,
SerialNumber=0
Jan 18 16:35:38 desktop kernel: drivers/usb/core/message.c: USB device number
2 default language ID 0x409
Jan 18 16:35:38 desktop kernel: usb 4-1: Product: USB Printer
Jan 18 16:35:38 desktop kernel: usb 4-1: Manufacturer: EPSON
Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:35:38 desktop kernel: usb 4-1: registering 4-1:1.0 (config #1,
interface 0)
Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: port 2, status 100, change 3, 12
Mb/s
Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: port 2 enable change, status 100
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: port 1 enable change, status 100
Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: port 2 enable change, status 100
Jan 18 16:35:38 desktop kernel: drivers/usb/host/uhci-hcd.c: d400: suspend_hc
Jan 18 16:35:38 desktop kernel: drivers/usb/host/uhci-hcd.c: d800: suspend_hc
Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[907]: modules.usbmap unparsable
line:
Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[907]: .
Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[907]: modules.usbmap unparsable
line:
Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[907]: .
Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[907]: modules.usbmap unparsable
line:
Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[907]: .
Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[907]: modules.usbmap unparsable
line:
Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[907]: .
Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[942]: Bad USB agent invocation
Jan 18 16:35:43 desktop modprobe: FATAL: Module battery not found.
Jan 18 16:35:43 desktop kernel: via82xx: Assuming DXS channels with 48k fixed
sample rate.
Jan 18 16:35:43 desktop kernel: Please try dxs_support=1 option and
report if it works on your machine.
Jan 18 16:35:43 desktop kernel: PCI: Setting latency timer of device
0000:00:11.5 to 64
Jan 18 16:35:44 desktop kernel: ACPI: Power Button (FF) [PWRF]
Jan 18 16:35:44 desktop kernel: ACPI: Processor [CPU0] (supports C1 C2, 2
throttling states)
Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1060]: modules.usbmap
unparsable line:
Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1060]: .
Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1060]: modules.usbmap
unparsable line:
Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1060]: .
Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1060]: modules.usbmap
unparsable line:
Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1060]: .
Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1060]: modules.usbmap
unparsable line:
Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1060]: .
Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1099]: Bad USB agent invocation
Jan 18 16:35:44 desktop smpppd[1021]: smpppd version 1.06 started
Jan 18 16:35:44 desktop kernel: NET: Registered protocol family 10
Jan 18 16:35:45 desktop kernel: Disabled Privacy Extensions on device c0386e20
(lo)
Jan 18 16:35:45 desktop kernel: IPv6 over IPv4 tunneling driver
Jan 18 16:35:45 desktop sshd[1106]: Server listening on :: port 22.
Jan 18 16:35:45 desktop kernel: request_module: failed /sbin/modprobe --
snd-card-1. error = 256
Jan 18 16:35:47 desktop kernel: parport0: PC-style at 0x378 [PCSPP(,...)]
Jan 18 16:35:47 desktop kernel: lp0: using parport0 (polling).
Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1309]: modules.usbmap
unparsable line:
Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1309]: .
Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1309]: modules.usbmap
unparsable line:
Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1309]: .
Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1309]: modules.usbmap
unparsable line:
Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1309]: .
Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1309]: modules.usbmap
unparsable line:
Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1309]: .
Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1354]: Bad USB agent invocation
Jan 18 16:35:48 desktop kernel: request_module: failed /sbin/modprobe --
char-major-4-72. error = 256
Jan 18 16:35:48 desktop /usr/sbin/cron[1481]: (CRON) STARTUP (fork ok)
Jan 18 16:35:49 desktop kernel: drivers/usb/serial/usb-serial.c: USB Serial
support registered for Generic
Jan 18 16:35:49 desktop kernel: usbserial 4-1:1.0: usb_probe_interface
Jan 18 16:35:49 desktop kernel: usbserial 4-1:1.0: usb_probe_interface - got
id
Jan 18 16:35:49 desktop kernel: drivers/usb/core/usb.c: registered new driver
usbserial
Jan 18 16:35:49 desktop kernel: drivers/usb/serial/usb-serial.c: USB Serial
Driver core v2.0
Jan 18 16:35:50 desktop /etc/hotplug/usb.agent[1572]: modules.usbmap
unparsable line:
Jan 18 16:35:50 desktop /etc/hotplug/usb.agent[1572]: .
Jan 18 16:35:50 desktop /etc/hotplug/usb.agent[1572]: modules.usbmap
unparsable line:
Jan 18 16:35:50 desktop /etc/hotplug/usb.agent[1572]: .
Jan 18 16:35:50 desktop /etc/hotplug/usb.agent[1572]: modules.usbmap
unparsable line:
Jan 18 16:35:50 desktop /etc/hotplug/usb.agent[1572]: .
Jan 18 16:35:50 desktop /etc/hotplug/usb.agent[1572]: modules.usbmap
unparsable line:
Jan 18 16:35:50 desktop /etc/hotplug/usb.agent[1572]: .
Jan 18 16:35:53 desktop kernel: request_module: failed /sbin/modprobe --
char-major-195-255. error = 256
Jan 18 16:35:54 desktop modprobe: FATAL: Module printer not found.
Jan 18 16:35:54 desktop /etc/hotplug/usb.agent[1651]: modules.usbmap
unparsable line:
Jan 18 16:35:54 desktop /etc/hotplug/usb.agent[1651]: .
Jan 18 16:35:54 desktop /etc/hotplug/usb.agent[1651]: modules.usbmap
unparsable line:
Jan 18 16:35:54 desktop /etc/hotplug/usb.agent[1651]: .
Jan 18 16:35:54 desktop /etc/hotplug/usb.agent[1651]: modules.usbmap
unparsable line:
Jan 18 16:35:54 desktop /etc/hotplug/usb.agent[1651]: .
Jan 18 16:35:54 desktop /etc/hotplug/usb.agent[1651]: modules.usbmap
unparsable line:
Jan 18 16:35:54 desktop /etc/hotplug/usb.agent[1651]: .
Jan 18 16:35:54 desktop kdm[1643]: IO Error in XOpenDisplay
Jan 18 16:35:54 desktop kdm[1617]: Server for display :0 terminated
unexpectedly
Jan 18 16:35:55 desktop kernel: eth0: no IPv6 routers present
Jan 18 16:35:55 desktop kernel: request_module: failed /sbin/modprobe --
char-major-195-255. error = 256
Jan 18 16:35:56 desktop kdm[1694]: IO Error in XOpenDisplay
Jan 18 16:35:56 desktop kdm[1617]: Server for display :0 terminated
unexpectedly
Jan 18 16:35:56 desktop kdm[1617]: Display :0 cannot be opened
Jan 18 16:35:56 desktop kernel: request_module: failed /sbin/modprobe --
char-major-195-255. error = 256
Jan 18 16:35:57 desktop kdm[1703]: IO Error in XOpenDisplay
Jan 18 16:35:57 desktop kdm[1617]: Server for display :0 terminated
unexpectedly
Jan 18 16:35:57 desktop kdm[1617]: Display :0 cannot be opened
Jan 18 16:35:57 desktop /etc/hotplug/usb.agent[1716]: Bad USB agent invocation
Jan 18 16:35:57 desktop kernel: request_module: failed /sbin/modprobe --
char-major-195-255. error = 256
Jan 18 16:35:58 desktop kdm[1712]: IO Error in XOpenDisplay
Jan 18 16:35:58 desktop kdm[1617]: Server for display :0 terminated
unexpectedly
Jan 18 16:35:58 desktop kdm[1617]: Display :0 cannot be opened
Jan 18 16:35:58 desktop kdm[1617]: Display :0 is being disabled (restarting
too fast)
Jan 18 16:36:17 desktop login[1636]: FAILED LOGIN 1 FROM /dev/tty1 FOR
UNKNOWN, User not known to the underlying authentication module
Jan 18 16:38:35 desktop kernel: nvidia: module license 'NVIDIA' taints kernel.
Jan 18 16:41:28 desktop init: Switching to runlevel: 6
Jan 18 16:41:34 desktop sshd[1106]: Received signal 15; terminating.
Jan 18 16:41:34 desktop smpppd[1130]: terminating on signal 15
Jan 18 16:41:34 desktop kernel: request_module: failed /sbin/modprobe --
snd-card-1. error = 256
Jan 18 16:41:35 desktop kernel: drivers/usb/serial/usb-serial.c: USB Serial
deregistering driver Generic
Jan 18 16:41:35 desktop kernel: drivers/usb/core/usb.c: deregistering driver
usbserial
Jan 18 16:41:35 desktop kernel: Kernel logging (proc) stopped.
Jan 18 16:41:35 desktop kernel: Kernel log daemon terminating.
Jan 18 16:41:36 desktop exiting on signal 15
Jan 18 16:44:11 desktop syslogd 1.4.1: restart.
Jan 18 16:44:13 desktop /sbin/hotplug[692]: no runnable /etc/hotplug/
usb_host.agent is installed
Jan 18 16:44:13 desktop /etc/hotplug/usb.rc[681]: loaded HCD: ehci-hcd
Jan 18 16:44:13 desktop /etc/hotplug/usb.rc[681]: loaded HCD: ohci-hcd
Jan 18 16:44:13 desktop /sbin/hotplug[733]: no runnable /etc/hotplug/
usb_host.agent is installed
Jan 18 16:44:13 desktop /sbin/hotplug[772]: no runnable /etc/hotplug/
usb_host.agent is installed
Jan 18 16:44:13 desktop /sbin/hotplug[811]: no runnable /etc/hotplug/
usb_host.agent is installed
Jan 18 16:44:13 desktop /etc/hotplug/usb.rc[681]: loaded HCD: uhci-hcd
Jan 18 16:44:13 desktop /etc/hotplug/usb.rc[681]: loaded HCD: ehci-hcd
Jan 18 16:44:13 desktop /etc/hotplug/usb.rc[681]: FATAL: Module mousedev not
found.
Jan 18 16:44:14 desktop /etc/hotplug/usb.rc[681]: FATAL: Module keybdev not
found.
Jan 18 16:44:14 desktop /etc/hotplug/usb.rc[681]: FATAL: Module printer not
found.
Jan 18 16:44:16 desktop /etc/hotplug/usb.agent[895]: Bad USB agent invocation
Jan 18 16:44:16 desktop kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jan 18 16:44:16 desktop kernel: Inspecting /boot/System.map-2.6.1-rc1
Jan 18 16:44:17 desktop kernel: Loaded 24789 symbols from /boot/
System.map-2.6.1-rc1.
Jan 18 16:44:17 desktop kernel: Symbols match kernel version 2.6.1.
Jan 18 16:44:17 desktop kernel: No module symbols loaded - kernel modules not
enabled.
Jan 18 16:44:17 desktop kernel: eth0: link down
Jan 18 16:44:17 desktop kernel: NET: Registered protocol family 17
Jan 18 16:44:17 desktop kernel: raw1394: /dev/raw1394 device initialized
Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: registered new driver
usbfs
Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: registered new driver
hub
Jan 18 16:44:17 desktop kernel: ehci_hcd: block sizes: qh 128 qtd 96 itd 128
sitd 64
Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: EHCI Host Controller
Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: reset hcs_params 0x3206
dbg=0 cc=3 pcc=2 ordered !ppc ports=6
Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: reset hcc_params 6872
thresh 7 uframes 256/512/1024
Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: capability 0001 at 68
Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: irq 21, pci mem
e089d000
Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: new USB bus registered,
assigned bus number 1
Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: reset command 080002
(park)=0 ithresh=8 period=1024 Reset HALT
Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: init command 010009
(park)=0 ithresh=1 period=256 RUN
Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI
1.00, driver 2003-Jun-13
Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: root hub device address
1
Jan 18 16:44:17 desktop kernel: usb usb1: new device strings: Mfr=3,
Product=2, SerialNumber=1
Jan 18 16:44:17 desktop kernel: drivers/usb/core/message.c: USB device number
1 default language ID 0x409
Jan 18 16:44:17 desktop kernel: usb usb1: Product: EHCI Host Controller
Jan 18 16:44:17 desktop kernel: usb usb1: Manufacturer: Linux 2.6.1-rc1
ehci_hcd
Jan 18 16:44:17 desktop kernel: usb usb1: SerialNumber: 0000:00:10.3
Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:44:17 desktop kernel: usb usb1: registering 1-0:1.0 (config #1,
interface 0)
Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: usb_probe_interface
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: usb_probe_interface - got id
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: USB hub found
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: 6 ports detected
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: standalone hub
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: ganged power switching
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: individual port over-current
protection
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: Single TT
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: TT requires at most 8 FS bit
times
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: Port indicators are not supported
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: power on to power good time: 0ms
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: hub controller current
requirement: 0mA
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: local power source is good
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: no over-current condition exists
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: enabling power on all ports
Jan 18 16:44:17 desktop kernel: ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host
Controller (OHCI) Driver (PCI)
Jan 18 16:44:17 desktop kernel: ohci_hcd: block sizes: ed 64 td 64
Jan 18 16:44:17 desktop kernel: drivers/usb/host/uhci-hcd.c: USB Universal
Host Controller Interface driver v2.1
Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller
Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.0: irq 21, io base
0000d400
Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.0: new USB bus registered,
assigned bus number 2
Jan 18 16:44:17 desktop kernel: drivers/usb/host/uhci-hcd.c: detected 2 ports
Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.0: root hub device address
1
Jan 18 16:44:17 desktop kernel: usb usb2: new device strings: Mfr=3,
Product=2, SerialNumber=1
Jan 18 16:44:17 desktop kernel: drivers/usb/core/message.c: USB device number
1 default language ID 0x409
Jan 18 16:44:17 desktop kernel: usb usb2: Product: UHCI Host Controller
Jan 18 16:44:17 desktop kernel: usb usb2: Manufacturer: Linux 2.6.1-rc1
uhci_hcd
Jan 18 16:44:17 desktop kernel: usb usb2: SerialNumber: 0000:00:10.0
Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:44:17 desktop kernel: usb usb2: registering 2-0:1.0 (config #1,
interface 0)
Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: usb_probe_interface
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: usb_probe_interface - got id
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: USB hub found
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: 2 ports detected
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: standalone hub
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: ganged power switching
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: global over-current protection
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: Port indicators are not supported
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: power on to power good time: 2ms
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: hub controller current
requirement: 0mA
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: local power source is good
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: no over-current condition exists
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: enabling power on all ports
Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller
Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status
001803 POWER sig=j CSC CONNECT
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: port 5, status 501, change 1, 480
Mb/s
Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.1: irq 21, io base
0000d800
Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.1: new USB bus registered,
assigned bus number 3
Jan 18 16:44:17 desktop kernel: drivers/usb/host/uhci-hcd.c: detected 2 ports
Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.1: root hub device address
1
Jan 18 16:44:17 desktop kernel: usb usb3: new device strings: Mfr=3,
Product=2, SerialNumber=1
Jan 18 16:44:17 desktop kernel: drivers/usb/core/message.c: USB device number
1 default language ID 0x409
Jan 18 16:44:17 desktop kernel: usb usb3: Product: UHCI Host Controller
Jan 18 16:44:17 desktop kernel: usb usb3: Manufacturer: Linux 2.6.1-rc1
uhci_hcd
Jan 18 16:44:17 desktop kernel: usb usb3: SerialNumber: 0000:00:10.1
Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:44:17 desktop kernel: usb usb3: registering 3-0:1.0 (config #1,
interface 0)
Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: usb_probe_interface
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: usb_probe_interface - got id
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: USB hub found
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: 2 ports detected
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: standalone hub
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: ganged power switching
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: global over-current protection
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: Port indicators are not supported
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: power on to power good time: 2ms
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: hub controller current
requirement: 0mA
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: local power source is good
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: no over-current condition exists
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: enabling power on all ports
Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller
Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: debounce: port 5: delay 100ms
stable 4 status 0x501
Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.2: irq 21, io base
0000dc00
Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: port 5 full speed -->
companion
Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status
003801 POWER OWNER sig=j CONNECT
Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.2: new USB bus registered,
assigned bus number 4
Jan 18 16:44:17 desktop kernel: drivers/usb/host/uhci-hcd.c: detected 2 ports
Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.2: root hub device address
1
Jan 18 16:44:17 desktop kernel: usb usb4: new device strings: Mfr=3,
Product=2, SerialNumber=1
Jan 18 16:44:17 desktop kernel: drivers/usb/core/message.c: USB device number
1 default language ID 0x409
Jan 18 16:44:17 desktop kernel: usb usb4: Product: UHCI Host Controller
Jan 18 16:44:17 desktop kernel: usb usb4: Manufacturer: Linux 2.6.1-rc1
uhci_hcd
Jan 18 16:44:17 desktop kernel: usb usb4: SerialNumber: 0000:00:10.2
Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: port 1, status 100, change 3, 12
Mb/s
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: port 2, status 100, change 3, 12
Mb/s
Jan 18 16:44:17 desktop kernel: usb usb4: registering 4-0:1.0 (config #1,
interface 0)
Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: usb_probe_interface
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: usb_probe_interface - got id
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: USB hub found
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: 2 ports detected
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: standalone hub
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: ganged power switching
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: global over-current protection
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: Port indicators are not supported
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: power on to power good time: 2ms
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: hub controller current
requirement: 0mA
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: local power source is good
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: no over-current condition exists
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: enabling power on all ports
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: port 1, status 100, change 3, 12
Mb/s
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: port 2, status 100, change 3, 12
Mb/s
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: port 1 enable change, status 100
Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: port 2 enable change, status 100
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: port 1, status 101, change 3, 12
Mb/s
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: debounce: port 1: delay 100ms
stable 4 status 0x101
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: new USB device on port 1,
assigned address 2
Jan 18 16:44:17 desktop kernel: usb 4-1: new device strings: Mfr=1, Product=2,
SerialNumber=0
Jan 18 16:44:17 desktop kernel: drivers/usb/core/message.c: USB device number
2 default language ID 0x409
Jan 18 16:44:17 desktop kernel: usb 4-1: Product: USB Printer
Jan 18 16:44:17 desktop kernel: usb 4-1: Manufacturer: EPSON
Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:44:17 desktop kernel: usb 4-1: registering 4-1:1.0 (config #1,
interface 0)
Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: port 2, status 100, change 3, 12
Mb/s
Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: port 2 enable change, status 100
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: port 1 enable change, status 100
Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: port 2 enable change, status 100
Jan 18 16:44:17 desktop kernel: drivers/usb/host/uhci-hcd.c: d400: suspend_hc
Jan 18 16:44:17 desktop kernel: drivers/usb/host/uhci-hcd.c: d800: suspend_hc
Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[907]: modules.usbmap unparsable
line:
Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[907]: .
Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[907]: modules.usbmap unparsable
line:
Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[907]: .
Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[907]: modules.usbmap unparsable
line:
Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[907]: .
Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[907]: modules.usbmap unparsable
line:
Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[907]: .
Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[942]: Bad USB agent invocation
Jan 18 16:44:22 desktop modprobe: FATAL: Module battery not found.
Jan 18 16:44:22 desktop kernel: via82xx: Assuming DXS channels with 48k fixed
sample rate.
Jan 18 16:44:22 desktop kernel: Please try dxs_support=1 option and
report if it works on your machine.
Jan 18 16:44:22 desktop kernel: PCI: Setting latency timer of device
0000:00:11.5 to 64
Jan 18 16:44:22 desktop kernel: ACPI: Power Button (FF) [PWRF]
Jan 18 16:44:22 desktop kernel: ACPI: Processor [CPU0] (supports C1 C2, 2
throttling states)
Jan 18 16:44:22 desktop smpppd[1021]: smpppd version 1.06 started
Jan 18 16:44:22 desktop kernel: NET: Registered protocol family 10
Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1059]: modules.usbmap
unparsable line:
Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1059]: .
Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1059]: modules.usbmap
unparsable line:
Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1059]: .
Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1059]: modules.usbmap
unparsable line:
Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1059]: .
Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1059]: modules.usbmap
unparsable line:
Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1059]: .
Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1101]: Bad USB agent invocation
Jan 18 16:44:22 desktop kernel: Disabled Privacy Extensions on device c0386e20
(lo)
Jan 18 16:44:22 desktop kernel: IPv6 over IPv4 tunneling driver
Jan 18 16:44:22 desktop sshd[1056]: Server listening on :: port 22.
Jan 18 16:44:23 desktop kernel: request_module: failed /sbin/modprobe --
snd-card-1. error = 256
Jan 18 16:44:25 desktop kernel: parport0: PC-style at 0x378 [PCSPP(,...)]
Jan 18 16:44:25 desktop kernel: lp0: using parport0 (polling).
Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1340]: modules.usbmap
unparsable line:
Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1340]: .
Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1340]: modules.usbmap
unparsable line:
Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1340]: .
Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1340]: modules.usbmap
unparsable line:
Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1340]: .
Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1340]: modules.usbmap
unparsable line:
Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1340]: .
Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1378]: Bad USB agent invocation
Jan 18 16:44:26 desktop /usr/sbin/cron[1462]: (CRON) STARTUP (fork ok)
Jan 18 16:44:27 desktop kernel: request_module: failed /sbin/modprobe --
char-major-4-72. error = 256
Jan 18 16:44:27 desktop kernel: drivers/usb/serial/usb-serial.c: USB Serial
support registered for Generic
Jan 18 16:44:27 desktop kernel: usbserial 4-1:1.0: usb_probe_interface
Jan 18 16:44:27 desktop kernel: usbserial 4-1:1.0: usb_probe_interface - got
id
Jan 18 16:44:27 desktop kernel: drivers/usb/core/usb.c: registered new driver
usbserial
Jan 18 16:44:27 desktop kernel: drivers/usb/serial/usb-serial.c: USB Serial
Driver core v2.0
Jan 18 16:44:28 desktop /etc/hotplug/usb.agent[1574]: modules.usbmap
unparsable line:
Jan 18 16:44:28 desktop /etc/hotplug/usb.agent[1574]: .
Jan 18 16:44:28 desktop /etc/hotplug/usb.agent[1574]: modules.usbmap
unparsable line:
Jan 18 16:44:28 desktop /etc/hotplug/usb.agent[1574]: .
Jan 18 16:44:28 desktop /etc/hotplug/usb.agent[1574]: modules.usbmap
unparsable line:
Jan 18 16:44:28 desktop /etc/hotplug/usb.agent[1574]: .
Jan 18 16:44:28 desktop /etc/hotplug/usb.agent[1574]: modules.usbmap
unparsable line:
Jan 18 16:44:28 desktop /etc/hotplug/usb.agent[1574]: .
Jan 18 16:44:32 desktop /etc/hotplug/usb.agent[1625]: Bad USB agent invocation
Jan 18 16:44:33 desktop kernel: eth0: no IPv6 routers present
Jan 18 16:44:35 desktop modprobe: FATAL: Module printer not found.
Jan 18 16:44:35 desktop /etc/hotplug/usb.agent[1633]: modules.usbmap
unparsable line:
Jan 18 16:44:35 desktop /etc/hotplug/usb.agent[1633]: .
Jan 18 16:44:35 desktop /etc/hotplug/usb.agent[1633]: modules.usbmap
unparsable line:
Jan 18 16:44:35 desktop /etc/hotplug/usb.agent[1633]: .
Jan 18 16:44:35 desktop /etc/hotplug/usb.agent[1633]: modules.usbmap
unparsable line:
Jan 18 16:44:35 desktop /etc/hotplug/usb.agent[1633]: .
Jan 18 16:44:35 desktop /etc/hotplug/usb.agent[1633]: modules.usbmap
unparsable line:
Jan 18 16:44:35 desktop /etc/hotplug/usb.agent[1633]: .
Jan 18 16:44:43 desktop login[1619]: FAILED LOGIN 1 FROM /dev/tty1 FOR
UNKNOWN, User not known to the underlying authentication module
Jan 18 16:45:03 desktop kernel: atkbd.c: Unknown key released (translated set
2, code 0x7a on isa0060/serio0).
Jan 18 16:46:52 desktop kernel: nvidia: module license 'NVIDIA' taints kernel.
Jan 18 16:46:52 desktop kernel: 0: nvidia: loading NVIDIA Linux x86 nvidia.o
Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003
Jan 18 16:46:53 desktop modprobe: WARNING: Error inserting agpgart (/lib/
modules/2.6.1-rc1/kernel/drivers/char/agp/agpgart.ko): Unknown symbol in
module, or unknown parameter (see dmesg)
Jan 18 16:46:53 desktop kernel: agpgart: Unknown parameter
`agp_try_unsupported'
Jan 18 16:46:53 desktop kernel: 0: NVRM: AGPGART: unable to retrieve symbol
table
Jan 18 16:46:53 desktop kernel: atkbd.c: Unknown key released (translated set
2, code 0x7a on isa0060/serio0).
Jan 18 16:47:45 desktop kernel: mtrr: no MTRR for d8000000,4000000 found
Jan 18 16:48:34 desktop login[2248]: FAILED LOGIN 1 FROM /dev/tty1 FOR jim,
Authentication failure
Jan 18 16:48:46 desktop modprobe: WARNING: Error inserting agpgart (/lib/
modules/2.6.1-rc1/kernel/drivers/char/agp/agpgart.ko): Unknown symbol in
module, or unknown parameter (see dmesg)
Jan 18 16:48:46 desktop kernel: agpgart: Unknown parameter
`agp_try_unsupported'
Jan 18 16:48:46 desktop kernel: 0: NVRM: AGPGART: unable to retrieve symbol
table
Jan 18 16:48:47 desktop kernel: atkbd.c: Unknown key released (translated set
2, code 0x7a on isa0060/serio0).
Jan 18 16:48:47 desktop kernel: atkbd.c: Unknown key released (translated set
2, code 0x7a on isa0060/serio0).
Jan 18 16:49:07 desktop kernel: request_module: failed /sbin/modprobe --
sound-slot-1. error = 256
Jan 18 16:49:20 desktop kernel: request_module: failed /sbin/modprobe --
snd-card-1. error = 256
Jan 18 16:49:23 desktop kernel: request_module: failed /sbin/modprobe --
snd-card-1. error = 256
Jan 18 16:49:36 desktop kernel: hdh: ATAPI 48X DVD-ROM drive, 512kB Cache
Jan 18 16:49:36 desktop kernel: Uniform CD-ROM driver Revision: 3.12
Jan 18 16:49:36 desktop /sbin/hotplug[2533]: no runnable /etc/hotplug/
block.agent is installed
Jan 18 16:50:34 desktop su: (to root) jim on /dev/pts/1
Jan 18 16:50:34 desktop su: pam_unix2: session started for user root, service
su
Jan 18 16:52:38 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 3 status
001803 POWER sig=j CSC CONNECT
Jan 18 16:52:38 desktop kernel: hub 1-0:1.0: port 3, status 501, change 1, 480
Mb/s
Jan 18 16:52:38 desktop kernel: hub 1-0:1.0: debounce: port 3: delay 100ms
stable 4 status 0x501
Jan 18 16:52:38 desktop kernel: ehci_hcd 0000:00:10.3: port 3 high speed
Jan 18 16:52:38 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 3 status
001005 POWER sig=se0 PE CONNECT
Jan 18 16:52:38 desktop kernel: hub 1-0:1.0: new USB device on port 3,
assigned address 2
Jan 18 16:52:38 desktop kernel: usb 1-3: new device strings: Mfr=73,
Product=80, SerialNumber=98
Jan 18 16:52:38 desktop kernel: drivers/usb/core/message.c: USB device number
2 default language ID 0x409
Jan 18 16:52:38 desktop kernel: usb 1-3: Product: USB CDRW6402EXT-B
Jan 18 16:52:38 desktop kernel: usb 1-3: Manufacturer: Iomega
Jan 18 16:52:38 desktop kernel: usb 1-3: SerialNumber: 5300000000032151
Jan 18 16:52:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:52:38 desktop kernel: usb 1-3: registering 1-3:2.0 (config #2,
interface 0)
Jan 18 16:52:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:52:38 desktop kernel: usbserial 1-3:2.0: usb_probe_interface
Jan 18 16:52:38 desktop kernel: usbserial 1-3:2.0: usb_probe_interface - got
id
Jan 18 16:52:38 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status
003802 POWER OWNER sig=j CSC
Jan 18 16:52:38 desktop kernel: hub 1-0:1.0: port 5, status 0, change 1, 12
Mb/s
Jan 18 16:52:41 desktop /etc/hotplug/usb.agent[2595]: Bad USB agent invocation
Jan 18 16:52:45 desktop kernel: Initializing USB Mass Storage driver...
Jan 18 16:52:45 desktop kernel: usb-storage 1-3:2.0: usb_probe_interface
Jan 18 16:52:45 desktop kernel: usb-storage 1-3:2.0: usb_probe_interface - got
id
Jan 18 16:52:45 desktop kernel: scsi0 : SCSI emulation for USB Mass Storage
devices
Jan 18 16:52:45 desktop /sbin/hotplug[2632]: no runnable /etc/hotplug/
scsi_host.agent is installed
Jan 18 16:52:47 desktop kernel: Vendor: IOMEGA Model: CDRW6402EXT-B
Rev: OOX1
Jan 18 16:52:47 desktop kernel: Type: CD-ROM
ANSI SCSI revision: 02
Jan 18 16:52:47 desktop /sbin/hotplug[2639]: no runnable /etc/hotplug/
scsi.agent is installed
Jan 18 16:52:47 desktop /etc/hotplug/usb.agent[2603]: modules.usbmap
unparsable line:
Jan 18 16:52:47 desktop /etc/hotplug/usb.agent[2603]: .
Jan 18 16:52:47 desktop /etc/hotplug/usb.agent[2603]: modules.usbmap
unparsable line:
Jan 18 16:52:47 desktop /etc/hotplug/usb.agent[2603]: .
Jan 18 16:52:47 desktop /etc/hotplug/usb.agent[2603]: modules.usbmap
unparsable line:
Jan 18 16:52:47 desktop /etc/hotplug/usb.agent[2603]: .
Jan 18 16:52:47 desktop /etc/hotplug/usb.agent[2603]: modules.usbmap
unparsable line:
Jan 18 16:52:47 desktop /etc/hotplug/usb.agent[2603]: .
Jan 18 16:52:47 desktop /sbin/hotplug[2640]: no runnable /etc/hotplug/
scsi_device.agent is installed
Jan 18 16:52:47 desktop kernel: WARNING: USB Mass Storage data integrity not
assured
Jan 18 16:52:47 desktop kernel: USB Mass Storage device found at 2
Jan 18 16:52:47 desktop kernel: drivers/usb/core/usb.c: registered new driver
usb-storage
Jan 18 16:52:47 desktop kernel: USB Mass Storage support registered.
Jan 18 16:52:47 desktop kernel: Attached scsi generic sg0 at scsi0, channel 0,
id 0, lun 0, type 5
Jan 18 16:52:47 desktop kernel: request_module: failed /sbin/modprobe --
block-major-11-0. error = 256
Jan 18 16:52:53 desktop kernel: sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/
form2 cdda tray
Jan 18 16:52:53 desktop kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0,
id 0, lun 0
Jan 18 16:52:53 desktop /sbin/hotplug[2700]: no runnable /etc/hotplug/
block.agent is installed
Jan 18 16:52:53 desktop kernel: request_module: failed /sbin/modprobe --
block-major-11-1. error = 256
Jan 18 16:52:58 desktop kernel: end_request: I/O error, dev sr0, sector 0
Jan 18 16:52:58 desktop kernel: Buffer I/O error on device sr0, logical block
0
Jan 18 16:52:58 desktop kernel: end_request: I/O error, dev sr0, sector 0
Jan 18 16:52:58 desktop kernel: FAT: unable to read boot sector
Jan 18 16:53:17 desktop kernel: FAT: bogus number of reserved sectors
Jan 18 16:53:17 desktop kernel: VFS: Can't find a valid FAT filesystem on dev
sr0.
Jan 18 16:53:34 desktop kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
Jan 18 16:53:34 desktop kernel: ISO 9660 Extensions: RRIP_1991A
Jan 18 16:54:20 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 2 status
001803 POWER sig=j CSC CONNECT
Jan 18 16:54:20 desktop kernel: hub 1-0:1.0: port 2, status 501, change 1, 480
Mb/s
Jan 18 16:54:20 desktop kernel: hub 1-0:1.0: debounce: port 2: delay 100ms
stable 4 status 0x501
Jan 18 16:54:20 desktop kernel: ehci_hcd 0000:00:10.3: port 2 high speed
Jan 18 16:54:20 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 2 status
001005 POWER sig=se0 PE CONNECT
Jan 18 16:54:20 desktop kernel: hub 1-0:1.0: new USB device on port 2,
assigned address 3
Jan 18 16:54:20 desktop kernel: usb 1-2: new device strings: Mfr=56,
Product=63, SerialNumber=80
Jan 18 16:54:20 desktop kernel: drivers/usb/core/message.c: USB device number
3 default language ID 0x409
Jan 18 16:54:20 desktop kernel: usb 1-2: Product: 3000LS v01.00.00
Jan 18 16:54:20 desktop kernel: usb 1-2: Manufacturer: Maxtor
Jan 18 16:54:20 desktop kernel: usb 1-2: SerialNumber: DEF10647FBB9
Jan 18 16:54:20 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:54:20 desktop kernel: usb 1-2: registering 1-2:1.0 (config #1,
interface 0)
Jan 18 16:54:20 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:54:20 desktop kernel: usbserial 1-2:1.0: usb_probe_interface
Jan 18 16:54:20 desktop kernel: usbserial 1-2:1.0: usb_probe_interface - got
id
Jan 18 16:54:20 desktop kernel: usb-storage 1-2:1.0: usb_probe_interface
Jan 18 16:54:20 desktop kernel: usb-storage 1-2:1.0: usb_probe_interface - got
id
Jan 18 16:54:20 desktop kernel: scsi1 : SCSI emulation for USB Mass Storage
devices
Jan 18 16:54:20 desktop /sbin/hotplug[2870]: no runnable /etc/hotplug/
scsi_host.agent is installed
Jan 18 16:54:23 desktop /etc/hotplug/usb.agent[2877]: Bad USB agent invocation
Jan 18 16:54:24 desktop /sbin/hotplug[2886]: no runnable /etc/hotplug/
scsi.agent is installed
Jan 18 16:54:24 desktop kernel: Vendor: Maxtor 2 Model: F040J0
Rev: 0 0
Jan 18 16:54:24 desktop /sbin/hotplug[2893]: no runnable /etc/hotplug/
block.agent is installed
Jan 18 16:54:24 desktop kernel: Type: Direct-Access
ANSI SCSI revision: 02
Jan 18 16:54:24 desktop kernel: SCSI device sda: 80293248 512-byte hdwr
sectors (41110 MB)
Jan 18 16:54:24 desktop kernel: sda: assuming drive cache: write through
Jan 18 16:54:24 desktop /sbin/hotplug[2900]: no runnable /etc/hotplug/
block.agent is installed
Jan 18 16:54:24 desktop /sbin/hotplug[2901]: no runnable /etc/hotplug/
scsi_device.agent is installed
Jan 18 16:54:24 desktop kernel: sda: sda1
Jan 18 16:54:24 desktop kernel: Attached scsi disk sda at scsi1, channel 0, id
0, lun 0
Jan 18 16:54:24 desktop kernel: Attached scsi generic sg1 at scsi1, channel 0,
id 0, lun 0, type 0
Jan 18 16:54:24 desktop kernel: WARNING: USB Mass Storage data integrity not
assured
Jan 18 16:54:24 desktop kernel: USB Mass Storage device found at 3
Jan 18 16:54:24 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status
003802 POWER OWNER sig=j CSC
Jan 18 16:54:24 desktop kernel: hub 1-0:1.0: port 5, status 0, change 1, 12
Mb/s
Jan 18 16:54:26 desktop modprobe: FATAL: Module usb_storage already in kernel.
Jan 18 16:54:26 desktop /etc/hotplug/usb.agent[2914]: modules.usbmap
unparsable line:
Jan 18 16:54:26 desktop /etc/hotplug/usb.agent[2914]: .
Jan 18 16:54:26 desktop /etc/hotplug/usb.agent[2914]: modules.usbmap
unparsable line:
Jan 18 16:54:26 desktop /etc/hotplug/usb.agent[2914]: .
Jan 18 16:54:26 desktop /etc/hotplug/usb.agent[2914]: modules.usbmap
unparsable line:
Jan 18 16:54:26 desktop /etc/hotplug/usb.agent[2914]: .
Jan 18 16:54:26 desktop /etc/hotplug/usb.agent[2914]: modules.usbmap
unparsable line:
Jan 18 16:54:26 desktop /etc/hotplug/usb.agent[2914]: .
Jan 18 16:54:26 desktop kernel: request_module: failed /sbin/modprobe --
block-major-11-1. error = 256
Jan 18 16:56:29 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 4 status
001803 POWER sig=j CSC CONNECT
Jan 18 16:56:29 desktop kernel: hub 1-0:1.0: port 4, status 501, change 1, 480
Mb/s
Jan 18 16:56:29 desktop kernel: hub 1-0:1.0: debounce: port 4: delay 100ms
stable 4 status 0x501
Jan 18 16:56:29 desktop kernel: ehci_hcd 0000:00:10.3: port 4 full speed -->
companion
Jan 18 16:56:29 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 4 status
003801 POWER OWNER sig=j CONNECT
Jan 18 16:56:29 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status
003802 POWER OWNER sig=j CSC
Jan 18 16:56:29 desktop kernel: hub 1-0:1.0: port 5, status 0, change 1, 12
Mb/s
Jan 18 16:56:29 desktop kernel: drivers/usb/host/uhci-hcd.c: d800: wakeup_hc
Jan 18 16:56:29 desktop kernel: hub 3-0:1.0: port 2, status 101, change 1, 12
Mb/s
Jan 18 16:56:29 desktop kernel: hub 3-0:1.0: debounce: port 2: delay 100ms
stable 4 status 0x101
Jan 18 16:56:29 desktop kernel: hub 3-0:1.0: new USB device on port 2,
assigned address 2
Jan 18 16:56:29 desktop kernel: usb 3-2: new device strings: Mfr=1, Product=2,
SerialNumber=0
Jan 18 16:56:29 desktop kernel: drivers/usb/core/message.c: USB device number
2 default language ID 0x409
Jan 18 16:56:29 desktop kernel: usb 3-2: Product: Perfection1200
Jan 18 16:56:29 desktop kernel: usb 3-2: Manufacturer: EPSON
Jan 18 16:56:29 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:56:29 desktop kernel: usb 3-2: registering 3-2:1.0 (config #1,
interface 0)
Jan 18 16:56:29 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:56:29 desktop kernel: usbserial 3-2:1.0: usb_probe_interface
Jan 18 16:56:29 desktop kernel: usbserial 3-2:1.0: usb_probe_interface - got
id
Jan 18 16:56:32 desktop /etc/hotplug/usb.agent[3123]: Bad USB agent invocation
Jan 18 16:56:35 desktop modprobe: FATAL: Module scanner not found.
Jan 18 16:56:35 desktop /etc/hotplug/usb.agent[3131]: modules.usbmap
unparsable line:
Jan 18 16:56:35 desktop /etc/hotplug/usb.agent[3131]: .
Jan 18 16:56:35 desktop /etc/hotplug/usb.agent[3131]: modules.usbmap
unparsable line:
Jan 18 16:56:35 desktop /etc/hotplug/usb.agent[3131]: .
Jan 18 16:56:35 desktop /etc/hotplug/usb.agent[3131]: modules.usbmap
unparsable line:
Jan 18 16:56:35 desktop /etc/hotplug/usb.agent[3131]: .
Jan 18 16:56:35 desktop /etc/hotplug/usb.agent[3131]: modules.usbmap
unparsable line:
Jan 18 16:56:35 desktop /etc/hotplug/usb.agent[3131]: .
Jan 18 16:56:36 desktop kernel: request_module: failed /sbin/modprobe --
block-major-11-1. error = 256
Jan 18 16:58:28 desktop resmgr[971]: accepted connection from user jim
Jan 18 16:58:28 desktop sane-find-scanner: resmgr: server response code 200
Jan 18 16:58:28 desktop resmgr[971]: disconnect from jim
Jan 18 16:58:28 desktop resmgr[971]: accepted connection from user jim
Jan 18 16:58:28 desktop sane-find-scanner: resmgr: server response code 200
Jan 18 16:58:28 desktop resmgr[971]: disconnect from jim
Jan 18 16:58:28 desktop resmgr[971]: accepted connection from user jim
Jan 18 16:58:28 desktop sane-find-scanner: resmgr: server response code 200
Jan 18 16:58:28 desktop resmgr[971]: disconnect from jim
Jan 18 16:58:28 desktop resmgr[971]: accepted connection from user jim
Jan 18 16:58:28 desktop sane-find-scanner: resmgr: server response code 200
Jan 18 16:58:28 desktop resmgr[971]: disconnect from jim
Jan 18 16:58:28 desktop kernel: usbfs: USBDEVFS_CONTROL failed cmd
sane-find-scann dev 2 rqt 128 rq 6 len 100 ret -32
Jan 18 16:58:28 desktop kernel: usbfs: USBDEVFS_CONTROL failed cmd
sane-find-scann dev 2 rqt 128 rq 6 len 100 ret -32
Jan 18 16:58:47 desktop resmgr[971]: accepted connection from user jim
Jan 18 16:58:47 desktop scanimage: resmgr: server response code 200
Jan 18 16:58:47 desktop resmgr[971]: disconnect from jim
Jan 18 16:58:47 desktop resmgr[971]: accepted connection from user jim
Jan 18 16:58:47 desktop scanimage: resmgr: server response code 200
Jan 18 16:58:47 desktop resmgr[971]: disconnect from jim
Jan 18 16:58:47 desktop resmgr[971]: accepted connection from user jim
Jan 18 16:58:47 desktop scanimage: resmgr: server response code 200
Jan 18 16:58:47 desktop resmgr[971]: disconnect from jim
Jan 18 16:58:47 desktop resmgr[971]: accepted connection from user jim
Jan 18 16:58:47 desktop scanimage: resmgr: server response code 200
Jan 18 16:58:47 desktop resmgr[971]: disconnect from jim
Jan 18 16:58:47 desktop kernel: usb 3-2: usb_disable_device nuking non-ep0
URBs
Jan 18 16:58:47 desktop kernel: usb 3-2: unregistering interface 3-2:1.0
Jan 18 16:58:47 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:58:47 desktop kernel: usb 3-2: registering 3-2:1.0 (config #1,
interface 0)
Jan 18 16:58:47 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 16:58:47 desktop kernel: usbserial 3-2:1.0: usb_probe_interface
Jan 18 16:58:47 desktop kernel: usbserial 3-2:1.0: usb_probe_interface - got
id
Jan 18 16:58:51 desktop kernel: request_module: failed /sbin/modprobe --
block-major-11-1. error = 256
Jan 18 16:58:51 desktop kernel: usb 3-2: control timeout on ep0in
Jan 18 16:58:51 desktop kernel: usb 3-2: hcd_unlink_urb cec4df40 fail -22
Jan 18 16:58:51 desktop modprobe: FATAL: Module scanner not found.
Jan 18 16:58:51 desktop /etc/hotplug/usb.agent[3368]: modules.usbmap
unparsable line:
Jan 18 16:58:51 desktop /etc/hotplug/usb.agent[3368]: .
Jan 18 16:58:51 desktop /etc/hotplug/usb.agent[3368]: modules.usbmap
unparsable line:
Jan 18 16:58:51 desktop /etc/hotplug/usb.agent[3368]: .
Jan 18 16:58:51 desktop /etc/hotplug/usb.agent[3368]: modules.usbmap
unparsable line:
Jan 18 16:58:51 desktop /etc/hotplug/usb.agent[3368]: .
Jan 18 16:58:51 desktop /etc/hotplug/usb.agent[3368]: modules.usbmap
unparsable line:
Jan 18 16:58:51 desktop /etc/hotplug/usb.agent[3368]: .
Jan 18 16:58:51 desktop kernel: usb 3-2: control timeout on ep0in
Jan 18 16:58:51 desktop kernel: usb 3-2: hcd_unlink_urb cec4df40 fail -22
Jan 18 16:58:52 desktop /etc/hotplug/usb.agent[3356]: /var/run/hotplug/
usb-remover-%4b8%104%103%255%255%255: line 3: /etc/hotplug/usb/epson_scanner:
Permission denied
Jan 18 16:58:52 desktop /etc/hotplug/usb.agent[3356]: FATAL: Module scanner
not found.
Jan 18 16:58:52 desktop kernel: request_module: failed /sbin/modprobe --
block-major-11-13. error = 256
Jan 18 16:59:00 desktop /USR/SBIN/CRON[3663]: (root) CMD ( rm -f /var/spool/
cron/lastrun/cron.hourly)
Jan 18 17:01:28 desktop resmgr[971]: accepted connection from user jim
Jan 18 17:01:28 desktop xsane: resmgr: server response code 200
Jan 18 17:01:28 desktop resmgr[971]: accepted connection from user jim
Jan 18 17:01:28 desktop resmgr[971]: disconnect from jim
Jan 18 17:01:28 desktop resmgr[971]: disconnect from jim
Jan 18 17:01:28 desktop xsane: resmgr: server response code 200
Jan 18 17:01:28 desktop resmgr[971]: accepted connection from user jim
Jan 18 17:01:28 desktop xsane: resmgr: server response code 200
Jan 18 17:01:28 desktop resmgr[971]: accepted connection from user jim
Jan 18 17:01:28 desktop resmgr[971]: disconnect from jim
Jan 18 17:01:28 desktop resmgr[971]: disconnect from jim
Jan 18 17:01:28 desktop xsane: resmgr: server response code 200
Jan 18 17:01:28 desktop kernel: usb 3-2: usb_disable_device nuking non-ep0
URBs
Jan 18 17:01:28 desktop kernel: usb 3-2: unregistering interface 3-2:1.0
Jan 18 17:01:28 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 17:01:28 desktop kernel: usb 3-2: registering 3-2:1.0 (config #1,
interface 0)
Jan 18 17:01:28 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 17:01:28 desktop kernel: usbserial 3-2:1.0: usb_probe_interface
Jan 18 17:01:28 desktop kernel: usbserial 3-2:1.0: usb_probe_interface - got
id
Jan 18 17:01:28 desktop kernel: usb 3-2: usb_disable_device nuking non-ep0
URBs
Jan 18 17:01:28 desktop kernel: usb 3-2: unregistering interface 3-2:1.0
Jan 18 17:01:28 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 17:01:28 desktop kernel: usb 3-2: registering 3-2:1.0 (config #1,
interface 0)
Jan 18 17:01:28 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 17:01:28 desktop kernel: usbserial 3-2:1.0: usb_probe_interface
Jan 18 17:01:28 desktop kernel: usbserial 3-2:1.0: usb_probe_interface - got
id
Jan 18 17:01:31 desktop kernel: request_module: failed /sbin/modprobe --
block-major-11-1. error = 256
Jan 18 17:01:32 desktop modprobe: FATAL: Module scanner not found.
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: modules.usbmap
unparsable line:
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: .
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: modules.usbmap
unparsable line:
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: .
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: modules.usbmap
unparsable line:
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: .
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: modules.usbmap
unparsable line:
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: .
Jan 18 17:01:32 desktop kernel: usb 3-2: control timeout on ep0in
Jan 18 17:01:32 desktop kernel: usb 3-2: hcd_unlink_urb cea0a640 fail -22
Jan 18 17:01:32 desktop kernel: usb 3-2: control timeout on ep0in
Jan 18 17:01:32 desktop kernel: usb 3-2: hcd_unlink_urb cea0a240 fail -22
Jan 18 17:01:32 desktop modprobe: FATAL: Module scanner not found.
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: modules.usbmap
unparsable line:
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: .
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: modules.usbmap
unparsable line:
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: .
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: modules.usbmap
unparsable line:
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: .
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: modules.usbmap
unparsable line:
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: .
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: cannot get config
descriptor 0, Broken pipe (32)
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: cannot get config
descriptor 0, Broken pipe (32)
Jan 18 17:01:32 desktop kernel: usbfs: USBDEVFS_CONTROL failed cmd usbmodules
dev 2 rqt 128 rq 6 len 9 ret -32
Jan 18 17:01:32 desktop kernel: usbfs: USBDEVFS_CONTROL failed cmd usbmodules
dev 2 rqt 128 rq 6 len 32 ret -32
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: cannot get config
descriptor 0, Broken pipe (32)
Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: cannot get config
descriptor 0, Broken pipe (32)
Jan 18 17:01:32 desktop kernel: usbfs: USBDEVFS_CONTROL failed cmd usbmodules
dev 2 rqt 128 rq 6 len 9 ret -32
Jan 18 17:01:32 desktop kernel: usbfs: USBDEVFS_CONTROL failed cmd usbmodules
dev 2 rqt 128 rq 6 len 9 ret -32
Jan 18 17:01:32 desktop kernel: usb 3-2: control timeout on ep0in
Jan 18 17:01:32 desktop kernel: usb 3-2: hcd_unlink_urb cea0a240 fail -22
Jan 18 17:01:32 desktop kernel: request_module: failed /sbin/modprobe --
block-major-11-1. error = 256
Jan 18 17:01:33 desktop /etc/hotplug/usb.agent[3766]: /var/run/hotplug/
usb-remover-%4b8%104%103%255%255%255: line 3: /etc/hotplug/usb/epson_scanner:
Permission denied
Jan 18 17:01:33 desktop /etc/hotplug/usb.agent[3766]: FATAL: Module scanner
not found.
Jan 18 17:01:33 desktop kernel: request_module: failed /sbin/modprobe --
char-major-9-0. error = 256
Jan 18 17:01:35 desktop /etc/hotplug/usb.agent[3804]: FATAL: Module scanner
not found.
Jan 18 17:07:45 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 4 status
003802 POWER OWNER sig=j CSC
Jan 18 17:07:45 desktop kernel: hub 1-0:1.0: port 4, status 0, change 1, 12
Mb/s
Jan 18 17:07:45 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status
001002 POWER sig=se0 CSC
Jan 18 17:07:45 desktop kernel: hub 1-0:1.0: port 5, status 100, change 1, 12
Mb/s
Jan 18 17:07:45 desktop kernel: hub 4-0:1.0: port 1, status 100, change 3, 12
Mb/s
Jan 18 17:07:45 desktop kernel: usb 4-1: USB disconnect, address 2
Jan 18 17:07:45 desktop kernel: usb 4-1: usb_disable_device nuking all URBs
Jan 18 17:07:45 desktop kernel: usb 4-1: unregistering interface 4-1:1.0
Jan 18 17:07:45 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 17:07:45 desktop kernel: usb 4-1: unregistering device
Jan 18 17:07:45 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 17:07:46 desktop kernel: hub 4-0:1.0: port 1 enable change, status 100
Jan 18 17:07:46 desktop kernel: drivers/usb/host/uhci-hcd.c: dc00: suspend_hc
Jan 18 17:07:49 desktop kernel: request_module: failed /sbin/modprobe --
block-major-11-1. error = 256
Jan 18 17:07:52 desktop /etc/hotplug/usb.agent[4549]: Bad USB agent invocation
Jan 18 17:08:01 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 4 status
003802 POWER OWNER sig=j CSC
Jan 18 17:08:01 desktop kernel: hub 1-0:1.0: port 4, status 0, change 1, 12
Mb/s
Jan 18 17:08:01 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status
001803 POWER sig=j CSC CONNECT
Jan 18 17:08:01 desktop kernel: hub 1-0:1.0: port 5, status 501, change 1, 480
Mb/s
Jan 18 17:08:01 desktop kernel: hub 1-0:1.0: debounce: port 5: delay 100ms
stable 4 status 0x501
Jan 18 17:08:01 desktop kernel: ehci_hcd 0000:00:10.3: port 5 full speed -->
companion
Jan 18 17:08:01 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status
003801 POWER OWNER sig=j CONNECT
Jan 18 17:08:01 desktop kernel: drivers/usb/host/uhci-hcd.c: dc00: wakeup_hc
Jan 18 17:08:01 desktop kernel: hub 4-0:1.0: port 1, status 101, change 1, 12
Mb/s
Jan 18 17:08:01 desktop kernel: hub 4-0:1.0: debounce: port 1: delay 100ms
stable 4 status 0x101
Jan 18 17:08:01 desktop kernel: hub 4-0:1.0: new USB device on port 1,
assigned address 3
Jan 18 17:08:01 desktop kernel: usb 4-1: new device strings: Mfr=1, Product=2,
SerialNumber=0
Jan 18 17:08:01 desktop kernel: drivers/usb/core/message.c: USB device number
3 default language ID 0x409
Jan 18 17:08:01 desktop kernel: usb 4-1: Product: USB Printer
Jan 18 17:08:01 desktop kernel: usb 4-1: Manufacturer: EPSON
Jan 18 17:08:01 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 17:08:01 desktop kernel: usb 4-1: registering 4-1:1.0 (config #1,
interface 0)
Jan 18 17:08:01 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 17:08:01 desktop kernel: usbserial 4-1:1.0: usb_probe_interface
Jan 18 17:08:01 desktop kernel: usbserial 4-1:1.0: usb_probe_interface - got
id
Jan 18 17:08:05 desktop /etc/hotplug/usb.agent[4592]: Bad USB agent invocation
Jan 18 17:08:08 desktop modprobe: FATAL: Module printer not found.
Jan 18 17:08:08 desktop /etc/hotplug/usb.agent[4600]: modules.usbmap
unparsable line:
Jan 18 17:08:08 desktop /etc/hotplug/usb.agent[4600]: .
Jan 18 17:08:08 desktop /etc/hotplug/usb.agent[4600]: modules.usbmap
unparsable line:
Jan 18 17:08:08 desktop /etc/hotplug/usb.agent[4600]: .
Jan 18 17:08:08 desktop /etc/hotplug/usb.agent[4600]: modules.usbmap
unparsable line:
Jan 18 17:08:08 desktop /etc/hotplug/usb.agent[4600]: .
Jan 18 17:08:08 desktop /etc/hotplug/usb.agent[4600]: modules.usbmap
unparsable line:
Jan 18 17:08:08 desktop /etc/hotplug/usb.agent[4600]: .
Jan 18 17:08:08 desktop kernel: request_module: failed /sbin/modprobe --
block-major-11-1. error = 256
Jan 18 17:10:04 desktop kernel: usblp 4-1:1.0: usb_probe_interface
Jan 18 17:10:04 desktop kernel: usblp 4-1:1.0: usb_probe_interface - got id
Jan 18 17:10:04 desktop kernel: drivers/usb/class/usblp.c: usblp0: USB
Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0001
Jan 18 17:10:04 desktop kernel: drivers/usb/core/file.c: looking for a minor,
starting at 0
Jan 18 17:10:04 desktop kernel: drivers/usb/core/usb.c: registered new driver
usblp
Jan 18 17:10:04 desktop kernel: drivers/usb/class/usblp.c: v0.13: USB Printer
Device Class driver
Jan 18 17:10:07 desktop /etc/hotplug/usb.agent[4785]: Bad USB agent invocation
Jan 18 17:10:52 desktop su: (to root) jim on /dev/pts/4
Jan 18 17:10:52 desktop su: pam_unix2: session started for user root, service
su
Jan 18 17:10:52 desktop su: pam_unix2: session finished for user root, service
su
Jan 18 17:10:52 desktop su: (to root) jim on /dev/pts/4
Jan 18 17:10:52 desktop su: pam_unix2: session started for user root, service
su
Jan 18 17:11:17 desktop kernel: pnp: Device 00:0d disabled.
Jan 18 17:11:18 desktop kernel: pnp: Device 00:0d activated.
Jan 18 17:11:18 desktop kernel: parport0: PC-style at 0x378 [PCSPP(,...)]
Jan 18 17:11:18 desktop kernel: lp0: using parport0 (polling).
Jan 18 17:11:18 desktop kernel: pnp: Device 00:0d disabled.
Jan 18 17:11:18 desktop kernel: pnp: Device 00:0d activated.
Jan 18 17:11:18 desktop kernel: parport0: PC-style at 0x378 [PCSPP(,...)]
Jan 18 17:11:18 desktop kernel: usb 4-1: hcd_unlink_urb cdcb27c0 fail -22
Jan 18 17:11:18 desktop kernel: usb 4-1: hcd_unlink_urb cdcb2340 fail -22
Jan 18 17:11:18 desktop kernel: usb 4-1: hcd_unlink_urb cdcb27c0 fail -22
Jan 18 17:11:18 desktop kernel: usb 4-1: hcd_unlink_urb cdcb2340 fail -22
Jan 18 17:11:31 desktop kernel: lp0: using parport0 (polling).
Jan 18 17:11:31 desktop kernel: request_module: failed /sbin/modprobe --
char-major-4-72. error = 256
Jan 18 17:11:31 desktop kernel: usb 4-1: hcd_unlink_urb cdcb27c0 fail -22
Jan 18 17:11:31 desktop kernel: usb 4-1: hcd_unlink_urb cdcb2340 fail -22
Jan 18 17:11:33 desktop kernel: request_module: failed /sbin/modprobe --
char-major-4-72. error = 256
Jan 18 17:11:33 desktop kernel: usb 4-1: hcd_unlink_urb cdcb27c0 fail -22
Jan 18 17:12:53 desktop resmgr[971]: accepted connection from user jim
Jan 18 17:12:53 desktop xsane: resmgr: server response code 200
Jan 18 17:12:53 desktop resmgr[971]: accepted connection from user jim
Jan 18 17:12:53 desktop resmgr[971]: disconnect from jim
Jan 18 17:12:53 desktop resmgr[971]: disconnect from jim
Jan 18 17:12:53 desktop xsane: resmgr: server response code 200
Jan 18 17:12:53 desktop resmgr[971]: accepted connection from user jim
Jan 18 17:12:53 desktop xsane: resmgr: server response code 200
Jan 18 17:12:53 desktop resmgr[971]: accepted connection from user jim
Jan 18 17:12:53 desktop resmgr[971]: disconnect from jim
Jan 18 17:12:53 desktop resmgr[971]: disconnect from jim
Jan 18 17:12:53 desktop xsane: resmgr: server response code 200
Jan 18 17:12:53 desktop kernel: usb 3-2: usb_disable_device nuking non-ep0
URBs
Jan 18 17:12:53 desktop kernel: usb 3-2: unregistering interface 3-2:1.0
Jan 18 17:12:53 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 17:12:53 desktop kernel: usb 3-2: registering 3-2:1.0 (config #1,
interface 0)
Jan 18 17:12:53 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 17:12:53 desktop kernel: usbserial 3-2:1.0: usb_probe_interface
Jan 18 17:12:53 desktop kernel: usbserial 3-2:1.0: usb_probe_interface - got
id
Jan 18 17:12:54 desktop kernel: usb 3-2: usb_disable_device nuking non-ep0
URBs
Jan 18 17:12:54 desktop kernel: usb 3-2: unregistering interface 3-2:1.0
Jan 18 17:12:54 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 17:12:54 desktop kernel: usb 3-2: registering 3-2:1.0 (config #1,
interface 0)
Jan 18 17:12:54 desktop kernel: drivers/usb/core/usb.c: usb_hotplug
Jan 18 17:12:54 desktop kernel: usbserial 3-2:1.0: usb_probe_interface
Jan 18 17:12:54 desktop kernel: usbserial 3-2:1.0: usb_probe_interface - got
id
Jan 18 17:12:57 desktop kernel: request_module: failed /sbin/modprobe --
block-major-11-1. error = 256
Jan 18 17:12:57 desktop modprobe: FATAL: Module scanner not found.
Jan 18 17:12:57 desktop /etc/hotplug/usb.agent[5304]: modules.usbmap
unparsable line:
Jan 18 17:12:57 desktop /etc/hotplug/usb.agent[5304]: .
Jan 18 17:12:57 desktop /etc/hotplug/usb.agent[5304]: modules.usbmap
unparsable line:
Jan 18 17:12:57 desktop /etc/hotplug/usb.agent[5304]: .
Jan 18 17:12:57 desktop /etc/hotplug/usb.agent[5304]: modules.usbmap
unparsable line:
Jan 18 17:12:57 desktop /etc/hotplug/usb.agent[5304]: .
Jan 18 17:12:57 desktop /etc/hotplug/usb.agent[5304]: modules.usbmap
unparsable line:
Jan 18 17:12:57 desktop /etc/hotplug/usb.agent[5304]: .
Jan 18 17:12:57 desktop kernel: usb 3-2: control timeout on ep0in
Jan 18 17:12:57 desktop kernel: usb 3-2: hcd_unlink_urb cdcb2bc0 fail -22
Jan 18 17:12:58 desktop kernel: request_module: failed /sbin/modprobe --
block-major-11-1. error = 256
Jan 18 17:13:00 desktop modprobe: FATAL: Module scanner not found.
Jan 18 17:13:00 desktop /etc/hotplug/usb.agent[5591]: modules.usbmap
unparsable line:
Jan 18 17:13:00 desktop /etc/hotplug/usb.agent[5591]: .
Jan 18 17:13:00 desktop /etc/hotplug/usb.agent[5591]: modules.usbmap
unparsable line:
Jan 18 17:13:00 desktop /etc/hotplug/usb.agent[5591]: .
Jan 18 17:13:00 desktop /etc/hotplug/usb.agent[5591]: modules.usbmap
unparsable line:
Jan 18 17:13:00 desktop /etc/hotplug/usb.agent[5591]: .
Jan 18 17:13:00 desktop /etc/hotplug/usb.agent[5591]: modules.usbmap
unparsable line:
Jan 18 17:13:00 desktop /etc/hotplug/usb.agent[5591]: .
Jan 18 17:13:00 desktop kernel: request_module: failed /sbin/modprobe --
block-major-11-1. error = 256
Jan 18 17:13:01 desktop kernel: request_module: failed /sbin/modprobe --
block-major-11-13. error = 256
Jan 18 17:13:02 desktop /etc/hotplug/usb.agent[5744]: /var/run/hotplug/
usb-remover-%4b8%104%103%255%255%255: line 3: /etc/hotplug/usb/epson_scanner:
Permission denied
Jan 18 17:13:02 desktop /etc/hotplug/usb.agent[5744]: FATAL: Module scanner
not found.
Jan 18 17:13:11 desktop kernel: usb 4-1: hcd_unlink_urb cdcb27c0 fail -22
Jan 18 17:13:11 desktop kernel: usb 4-1: hcd_unlink_urb cdcb2340 fail -22
Jan 18 17:14:01 desktop su: pam_unix2: session finished for user root, service
su
Jan 18 17:14:07 desktop gconfd (jim-5909): starting (version 2.2.1), pid 5909
user 'jim'
Jan 18 17:14:07 desktop gconfd (jim-5909): Resolved address "xml:readonly:/
etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only config source at
position 0
Jan 18 17:14:07 desktop gconfd (jim-5909): Resolved address "xml:readonly:/
etc/opt/gnome/gconf/preconf/gconf.xml.defaults" to a read-only config source
at position 1
Jan 18 17:14:07 desktop gconfd (jim-5909): Resolved address "xml:readwrite:/
home/jim/.gconf" to a writable config source at position 2
Jan 18 17:14:56 desktop kernel: ksysguardd: numerical sysctl 7 2 1 is
obsolete.
Jan 18 17:44:11 desktop -- MARK --
More information about the sane-devel
mailing list