[sane-devel] please help w/Epson 636U and Panther

[Henning Meier-Geinitz]

Hi,

On Sun, Jul 04, 2004 at 11:37:05AM -0400, Fritz Lang wrote:
>  I have a G3 450Mhz running Panther.3.2 on OEM video card.

That's the interesting part of the log:

> [epson] sane_init: sane-backends 1.0.14
> [sanei_debug] Setting debug level of sanei_usb to 255.
> usb_set_debug: Setting debugging level to 255 (on)
> [sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't look like a scanner (9/9)
> [sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces
> [sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101) interface 0  at libusb:001:002-04b8-0101-ff-ff

That's your scanner.

> [sanei_usb] sanei_usb_init: found 1 devices
> [epson] sane_init, ># epson.conf<
> [epson] sane_init, >#<
> 
> there was more to this response, but it looked like instructions that 
> I didn't understand, not response to the Terminal command.

I guess you just snipped the interesting part. 

Anyway, make sure that a line containing only "usb" is in epson.conf.
If that's the case, show us the complete log. To make the log shorter,
you can disable everything but "epson" in dll.conf.

Bye,
  Henning