[sane-devel] Canon LiDE30

Thomas Rösch thomas.roesch@gmx.de
Mon, 12 Jul 2004 19:09:39 +0200


I have exactly the same problem with my HP ScanJet 5300C. I have already 
posted two messages here, but up to now nobody could help me.

In my case, something seems to claim the interface. I tried 
EXPORT SANE_DEBUG_SANEI_USB=255
and then a SCANIMAGE -L which resulted in

[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0701
[avision] attach: (Version: 1.0 Build: 80)
[avision] attach: opening libusb:003:002
[sanei_usb] sanei_usb_open: trying to open device `libusb:003:002'
Check that you have permissions to write to 003/002 and, if you don't, that 
you set up hotplug (http://linux-hotplug.sourceforge.net/) correctly.
USB error: could not claim interface 0: Device or resource busy
[sanei_usb] sanei_usb_open: libusb complained: could not claim interface 0: 
Device or resource busy
[sanei_usb] Maybe the kernel scanner driver claims the scanner's interface?
[avision] attach: open failed (Device busy)

If you find something out, could you please tell me.

Thank you,
Thomas

Am Montag, 12. Juli 2004 17:53 schrieb Nobody Here:
> I'm having trouble using my scanner.
> I've read the sane, sane-usb, and sane-plustek man pages, and looked for
> help at the quiet IRC channel.
>
> My scanner is found and correctly identified by sane-find-scanner, but not
> listed by scanimage -L . It is a CanonLIDE30 . To help it out, I edited t=
he
> plustek.conf to tell it: device libusb:002:005
> My SANE version is 1.0.13 .
> I'm using SuSE Linux 9.1 .
> Custom kernel 2.6.7.
> Guidance would be appreciated.
>
> _________________________________________________________________
> Spam effektiv reduzieren - mit dem Hotmail-Junk-Filter!
> http://www.msn.de/antispam/prevention/junkmailfilter Schluß mit Spam - =
MSN
> hilft Ihnen hier weiter.