[sane-devel] HP 7450C libusb problems

[George Garvey]

On Sun, Jun 06, 2004 at 08:03:54PM +0200, Henning Meier-Geinitz wrote:
> So looking at which kind of host controller the bug shows up and even
> which mainboard is used may help to find out what's actually going on.

Mine is an ASUS A7V333.
This is proc/bus/usb/devices:

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.6-1.422 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:11.3
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.6-1.422 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:11.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03f0 ProdID=0801 Rev= 0.01
S:  Manufacturer=hp
S:  Product=hp scanjet 7400c
S:  SerialNumber=SCN2A9S0330LZ   
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS=   8 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms