[sane-devel] LaserJet 3380

[Peter Jamriško]

Meanwhile I changed cable connected to the printer and I got another output:

------------------------------------------------------------------
[sanei_debug] Setting debug level of dll to 128.
[dll] sane_init: SANE dll backend version 1.0.8 from sane-backends 1.0.11
[dll] add_backend: adding backend `hpoj'
[dll] load: searching backend `hpoj' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-hpoj.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-hpoj.so.1'
[dll] init: initializing backend `hpoj'
ptalInit(): debug level set to 2.
ptalInit()
ptalDeviceAdd(mlc:par:hp_LaserJet_3380): dev=0x08052D70.
ptalDeviceProbe: dev=<.>.
ptalDeviceOpen(.): missing colon!
ptalDeviceProbe: dev=<..>.
ptalDeviceOpen(..): missing colon!
ptalDeviceProbe: dev=<mlc:par:hp_LaserJet_3380>.
ptalMlcDeviceOpen(mlc:par:hp_LaserJet_3380): found matching 
dev=0x08052D70 (mlc:par:hp_LaserJet_3380).
ptalDeviceProbe: dev=<default-device>.
ptalDeviceOpen(default-device): missing colon!
[dll] init: backend `hpoj' is version 1.0.6
hpoj: sane_hpoj_get_devices
hpoj:mlc:par:hp_LaserJet_3380: sane_hpoj_open
ptalMlcDeviceOpen(mlc:par:hp_LaserJet_3380): found matching 
dev=0x08052D70 (mlc:par:hp_LaserJet_3380).
ptalChannelAllocate(dev=0x08052D70): chan=0x08058480.
ptalChannelSetRemoteService(chan=0x08058480,serviceType=2,socketID=0,serviceName=<>)
ptalChannelSetPacketSizes(chan=0x08058480,desiredHPSize=256,desiredPHSize=8192)
ptalChannelAllocate(dev=0x08052D70): chan=0x080584F0.
ptalChannelSetRemoteService(chan=0x080584F0,serviceType=3,socketID=0,serviceName=<PTAL-MLCD-RESERVE-SCANNER>)
ptalChannelSetErrorHandling(chan=0x080584F0,retryCount=0,retryDelay=0)
hpoj:mlc:par:hp_LaserJet_3380: device ID 
string=<MFG:Hewlett-Packard;CMD:PJL,MLC,BIDI-ECP,PCL,POSTSCRIPT,PCLXL;MDL:hp 
LaserJet 3380;CLS:PRINTER;DES:Hewlett-Packard LaserJet 
3380;MEM:23MB;COMMENT:RES=1200x1;;1284.4DL:4d,4e,1;>
hpoj:mlc:par:hp_LaserJet_3380: hpojConnOpen
ptalChannelOpen(chan=0x08058480): fd=3.
hpoj:mlc:par:hp_LaserJet_3380: hpojResetScanner
hpoj:mlc:par:hp_LaserJet_3380: hpojSclSendCommand(cmd=11110, param=0, 
punc=<*>, letter1=<z>, letter2=<E>)
hpoj:mlc:par:hp_LaserJet_3380: Sending SCL command <<ESC>E>>
ptalChannelWrite(chan=0x08058480,buffer=0xBFFFDDC0,count=2)
ptalChannelWrite(chan=0x08058480,buffer=0xBFFFDDC0,count=2) returns 2.
_ptalChannelSelect(chan=0x08058480) returns 0, errno=2, n=4, 
timeout=0xBFFFCAF0, tv_sec=0, tv_usec=0.
ptalPmlAllocate(dev=0x08052D70)
ptalPmlAllocate(dev=0x08052D70) returns obj=0x08058560.
ptalPmlSetID(obj=0x08058560)
ptalPmlSetID(obj=0x08058560) returns OK.
ptalPmlOpen(dev=0x08052D70)
ptalChannelAllocate(dev=0x08052D70): chan=0x08058DC0.
ptalChannelSetRemoteService(chan=0x08058DC0,serviceType=4,socketID=0,serviceName=<>)
ptalChannelOpen(chan=0x08058DC0): fd=4.
hpoj:mlc:par:hp_LaserJet_3380: Using SCL protocol.
hpoj:mlc:par:hp_LaserJet_3380: hpojSclSendCommand(cmd=10886, param=18, 
punc=<*>, letter1=<s>, letter2=<E>)
_ptalChannelSelect(chan=0x08058480) returns 0, errno=2, n=4, 
timeout=0xBFFFC8D0, tv_sec=0, tv_usec=0.
hpoj:mlc:par:hp_LaserJet_3380: Sending SCL command <<ESC>*s18E>>
ptalChannelWrite(chan=0x08058480,buffer=0xBFFFDBA0,count=6)
ptalChannelWrite(chan=0x08058480,buffer=0xBFFFDBA0,count=6) returns 6.
_ptalChannelSelect(chan=0x08058480) returns 0, errno=2, n=4, 
timeout=0xBFFFDA10, tv_sec=0, tv_usec=0.
ptalSclChannelRead(chan=0x08058480): 
ptalChannelReadTimeout(buffer=0xBFFFDDF0,count=256) returns 0, errno=2.
hpoj:mlc:par:hp_LaserJet_3380: Got response (len=0) <<ESC>>.
hpoj:mlc:par:hp_LaserJet_3380: hpojSclInquire(cmd=10886,param=18) didn't 
get expected response of <<ESC>*s18d>!
hpoj:mlc:par:hp_LaserJet_3380: hpojConnClose
ptalChannelClose(chan=0x08058480)
ptalPmlClose(dev=0x08052D70)
ptalChannelClose(chan=0x08058DC0)
ptalChannelClose(chan=0x080584F0)
ptalChannelClose(chan=0x080584F0): not open!
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `hpoj's exit function
hpoj: sane_hpoj_exit
ptalDone()
ptalDeviceDelete(dev=0x08052D70)
ptalDeviceClose(dev=0x08052D70)
ptalPmlDeallocate(obj=0x08058560)
ptalChannelDeallocate(chan=0x08058480)
ptalChannelClose(chan=0x08058480)
ptalChannelClose(chan=0x08058480): not open!
ptalChannelDeallocate(chan=0x080584F0)
ptalChannelClose(chan=0x080584F0)
ptalChannelClose(chan=0x080584F0): not open!
ptalChannelDeallocate(chan=0x08058DC0)
ptalChannelClose(chan=0x08058DC0)
ptalChannelClose(chan=0x08058DC0): not open!
[dll] sane_exit: finished

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
------------------------------------------------------------------

This looks better, but scanner still wasn't found.