Fwd: [sane-devel] SANE SCSI EPSON problem
Karl Heinz Kremer
Fri, 5 Mar 2004 18:24:52 -0500
Begin forwarded message:
> From: Karl Heinz Kremer <email@example.com>
> Date: March 5, 2004 6:23:05 PM EST
> To: Philippe PEZET <firstname.lastname@example.org>
> Subject: Re: [sane-devel] SANE SCSI EPSON problem
> It probably is a result of the out of memory error. This error is
> caused by a failed malloc
> call. How much memory do you have in your embedded box?
> On Mar 5, 2004, at 1:16 PM, Philippe PEZET wrote:
>> I am trying to use an scsi EPSON (GT9000 or 1200C) device on a
>> Bering-uClibc box.
>> with the following :
>> export SANE_DEBUG_DLL=255
>> export SANE_DEBUG_EPSON=128
>> saned -d128 &
>> scanimage -L
>> saned starts going thru the epson.conf file which apparently goes
>> well sending buf outputs and ends up with :
>> option equipment is installed
>> out of memory (line 5688)
>> sane_get_devices : found 0 devices.
>> is the "out of memory" the reason why it fails ?
>> any hint ?
>> sane-devel mailing list: email@example.com
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>> to firstname.lastname@example.org