[sane-devel] microtek slimscan C6 USB

[jrlannon1@cox.net]

Hello,

I'm trying to get my microtek slimscan C6 USB scanner working under 
YellowDog Linux 3.0.1 (2.4.22-2g Kernel) running on an eMac.  

Upon boot up without the scanner plugged in, the messages files contains 
this (w.r.t USB):

Mar 11 16:51:32 localhost kernel: usb.c: registered new driver usbdevfs
Mar 11 16:51:32 localhost kernel: usb.c: registered new driver hub
Mar 11 16:51:32 localhost kernel: host/usb-ohci.c: USB OHCI at membase 
0xcb05f000, IRQ 27
Mar 11 16:51:32 localhost kernel: host/usb-ohci.c: usb-10:18.0, Apple 
Computer Inc. KeyLargo USB
Mar 11 16:51:32 localhost kernel: usb.c: new USB bus registered, assigned 
bus number 1
Mar 11 16:51:32 localhost kernel: hub.c: USB hub found
Mar 11 16:51:32 localhost kernel: host/usb-ohci.c: USB OHCI at membase 
0xcb061000, IRQ 28
Mar 11 16:51:32 localhost kernel: host/usb-ohci.c: usb-10:19.0, Apple 
Computer Inc. KeyLargo USB (#2)
Mar 11 16:51:32 localhost kernel: usb.c: new USB bus registered, assigned 
bus number 2
Mar 11 16:51:32 localhost kernel: hub.c: USB hub found
Mar 11 16:51:32 localhost kernel: usb.c: registered new driver hid
Mar 11 16:51:32 localhost kernel: hid-core.c: USB HID support drivers
Mar 11 16:51:32 localhost kernel: hub.c: new USB device 10:19.0-1, assigned 
address 2
Mar 11 16:51:32 localhost kernel: hub.c: USB hub found
Mar 11 16:51:32 localhost kernel: hub.c: new USB device 10:19.0-1.1, 
assigned address 3
Mar 11 16:51:32 localhost kernel: input: USB HID v10.01 Mouse [Logitech 
Apple Optical USB Mouse] on usb2:3.0
Mar 11 16:51:32 localhost kernel: hub.c: new USB device 10:19.0-1.3, 
assigned address 4
Mar 11 16:51:32 localhost kernel: input: USB HID
v10.01 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb2:
4.0
Mar 11 16:51:32 localhost kernel: input: USB HID
v10.01 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb2:4.1

Next I load the microtek module:

Mar 11 16:53:19 localhost kernel: usb.c: registered new driver microtekX6
Mar 11 16:53:19 localhost kernel: microtek.c: v0.4.4:Microtek Scanmaker X6 
USB scanner driver

Finally I plug in the scanner:

Mar 11 16:53:37 localhost kernel: hub.c: new USB device 10:18.0-2, assigned 
address 2
Mar 11 16:53:37 localhost kernel: usb.c: failed to set device 2 default 
configuration (error=-110)
Mar 11 16:53:37 localhost kernel: hub.c: new USB device 10:18.0-2, assigned 
address 3
Mar 11 16:53:37 localhost kernel: usb.c: failed to set device 3 default 
configuration (error=-110)

sane-find-scanner (as root) can't find any scanners.  One thing that is 
interesting is that Ed Hanrick's VueScan (under Mac OS 10.3.2) does find the 
scanner and works.  I was hoping for some similar results with GIMP and 
XSANE.

According to SANE man pages (sane-microtek2), this scanner should be 
supported.  If anyone has any ideas on this, I would appreciate any info.  I'm 
fairly new to linux.  Thanks.


/proc/scsi/scsi:

Attached devices: 
Host: scsi0 Channel: 00 Id: 00 Lun: 00
 Vendor: HL-DT-ST Model: RW/DVD GCC-4480B Rev: 1.03
 Type:   CD-ROM                           ANSI SCSI
revision: 02

/proc/bus/usb/devices (via usbtree):

/:  Bus 02.Port 1: Dev 1, Class=root_hub,Driver=usb-ohci/2p, 12M
    |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/3p,12M
        |__ Port 1: Dev 3, If 0, Class=HID,Driver=hid, 1.5M
        |__ Port 3: Dev 4, If 0, Class=HID,Driver=hid, 12M
        |__ Port 3: Dev 4, If 1, Class=HID,Driver=hid, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=usb-ohci/2p, 12M