[sane-devel] SANE SCSI EPSON problem]

[Karl Heinz Kremer]

This does not sounds like a lot of memory. I really have no idea how  
much Sane needs.

How good are you with the compiler? If you think you can modify the  
source code, go to
line 5688 and add some code before the malloc that fails. Try to malloc  
memory until
you can no longer get more memory. Print the size you were able to  
allocate. This gives
you some idea how much memory you have.


On Mar 5, 2004, at 6:33 PM, Philippe PEZET wrote:

> 32 Meg box, installed a 12 Meg tmpfs for system (36% used only) + 4  
> Meg for logging.
>
>
> ----------------------------------------------------------------------- 
> -
> It probably is a result of the out of memory error. This error is
> caused by a failed malloc
> call. How much memory do you have in your embedded  box?
>
>
> On Mar 5, 2004, at 1:16 PM, Philippe PEZET wrote:
>
>> I am trying to use an scsi EPSON (GT9000 or 1200C) device on a  
>> Bering-uClibc box.
>> with the following :
>>
>> export SANE_DEBUG_DLL=255
>> export SANE_DEBUG_EPSON=128
>> saned -d128 &
>> scanimage -L
>>
>> saned starts going thru the epson.conf file which apparently goes  
>> well sending buf outputs and ends up with :
>>
>> option equipment is installed
>> out of memory (line 5688)
>> ....
>> ...
>> sane_get_devices()
>> sane_get_devices : found 0 devices.
>>
>> is the "out of memory" the reason why it fails ?
>> any hint ?
>>
>>
>> -- 
>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>             to sane-devel-request at lists.alioth.debian.org
>
>
>
> -- 
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>             to sane-devel-request at lists.alioth.debian.org