[sane-devel] SANE w/OmniPage Pro X and OSX.2.6

[Karl Heinz Kremer]

Fritz,
you need to add a line containing
usb
to the file. Please re-read my previous email and make sure that you 
perform all the steps.
Without this line, your scanner will not get recognized.

Karl Heinz


On May 4, 2004, at 9:01 AM, Fritz Lang wrote:

> Hello all,
>
> I'd been in contact with Karl Heinz Kremer and he has given me info on 
> how to edit the backend for my Epson 636U scanner.
> I did it.  I'm not conversant with Terminal.
>
> In any case, I'd like to use OmniPage Pro X under OSX.2.6 to use my 
> Epson scanner without starting up "Classic".
>
> This is the command
>
>  pico /usr/local/etc/sane.d/epson.conf
>
> and this is the result of that edit
>
> # epson.conf
> #
> # here are some examples for how to configure the EPSON backend
> #
> # SCSI scanner:
> scsi EPSON
> #
> # Parallel port scanner:
> #pio 0x278
> #pio 0x378
> #pio 0x3BC
> #
> # USB scanner - only enable this if you have an EPSON scanner. It could
> #               otherwise block your non-EPSON scanner from being
> #               recognized.
> #               Depending on your distribution, you may need either the
> #               first or the second entry.
> #usb /dev/usbscanner0
> #usb /dev/usb/scanner0
>
>
> Help would be appreciated.
>
> Thanks,
>
> Fritz Lang
> -- 
>
> -- 
> sane-devel mailing list: sane-devel@lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>             to sane-devel-request@lists.alioth.debian.org