[sane-devel] Using sane on Suse 9.1

Brad McNeely brad_mcneely@excite.com
Fri, 28 May 2004 11:32:51 -0400 (EDT)

OK, I installed the libieee1284 and sane packages.  But now this is happening, is this the right forum?


  # No SCSI scanners found. If you expected something different, make sure that

  # you have loaded a SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0205 [HP ScanJet 3300C]) at libusb:001:002

  # Your USB scanner was (probably) detected. It may or may not be supported by

  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports

  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you

  # found the scanner devices, be sure to adjust access permissions as

  # necessary.

bmcneely@linux:~> rpm -qa | grep -i libusb


 --- On Fri 05/28, Michael Herder < crapmail@nurfuerspam.de > wrote:

From: Michael Herder [mailto: crapmail@nurfuerspam.de]

To: sane-devel@lists.alioth.debian.org

Date: Fri, 28 May 2004 16:07:09 +0200

Subject: Re: [sane-devel] Using sane on Suse 9.1

Brad McNeely, Friday 28 May 2004 15:27:<br>> When I upgraded from SuSE 8.2 to SuSE 9.1 I lost the ability to use my HP<br>> scanjet 3300C scanner.  It was recommended that I use<br>> sane-backends-1.0.14.tar.gz.  I successfully downloaded the file and did<br>> these steps as per the README:<br><br>See <br>http://packman.links2linux.de/?action=211<br>They have 1.0.14 for SuSE 9.1 (RPM)...<br><br>bb<br>Michael<br><br>-- <br>sane-devel mailing list: sane-devel@lists.alioth.debian.org<br>http://lists.alioth.debian.org/mailman/listinfo/sane-devel<br>Unsubscribe: Send mail with subject "unsubscribe your_password"<br>             to sane-devel-request@lists.alioth.debian.org<br>

Join Excite! - http://www.excite.com
The most personalized portal on the Web!