[sane-devel] Acer ScanPrisa 640U
Thu, 25 Nov 2004 13:19:35 +1300
thx for the reply ..
I did what you suggested Oliver
> This entry will cause problems. You must give the path to the firmware
> filename, not the device name. E.g. if you copied your firmware file
> to /etc/acer/u96v121.bin the entry should read
> firmware /etc/acer/u96v121.bin
I corrected the path ..
> > # For USB scanners also specify bus=usb, e.g.
> > /dev/usb/scanner0 bus=usb
and I commented out the above line ..
but I still am no better off .. nothing is detected when
I run xsane ..