[sane-devel] Epson 1650 doesn't work with Fedora Core 2

[Karl Heinz Kremer]

Please try to capture a log file when you run scanimage:

export SANE_DEBUG_EPSON=128
scanimage > /tmp/scan.log 2>&1

Then attach the file /tmp/scan.log to an email.

Thanks,

Karl Heinz


On Sep 6, 2004, at 9:15 PM, Glen R. Salo wrote:

> I have been unable to get my Epson 1650 to work with Fedora Core 2.  I 
> have
> found many related discussions, but nothing seems to work, even as 
> root.  The
> scanner seems to be found with sane-find-scanner, but not with 
> scanimage.
>
> The output of sane-find-scanner (as root):
>   # No SCSI scanners found. If you expected something different, make 
> sure
> that
>   # you have loaded a SCSI driver for your SCSI adapter.
>
> found USB scanner (vendor=0x04b8 [EPSON], product=0x0110 [EPSON 
> Scanner]) at
> libusb:003:002
>   # Your USB scanner was (probably) detected. It may or may not be 
> supported
> by
>   # SANE. Try scanimage -L and read the backend's manpage.
>
>   # Scanners connected to the parallel port or other proprietary ports 
> can't
> be
>   # detected by this program.
>
> The output of scanimage -L (as root):
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
>
> I have checked the file permissions, epson.conf, and libsane.usermap 
> as shown
> below.  Any suggestions on what I should try next?
>
> Thanks,
>
> Glen
>
> The file permissions in /proc/bus/usb/003 are:
> -rw-rw-rw-  1 root root 43 Sep  6 20:04 001
> -rw-rw-rw-  1 root root 50 Sep  6 20:04 002
> -rw-rw-rw-  1 root root 52 Sep  6 20:04 003
>
> The current version of /etc/sane.d/epson.conf:
> # epson.conf
> #
> # here are some examples for how to configure the EPSON backend
> #
> # SCSI scanner:
> scsi EPSON
> #
> # Parallel port scanner:
> #pio 0x278
> #pio 0x378
> #pio 0x3BC
> #
> # USB scanner - only enable this if you have an EPSON scanner. It could
> #               otherwise block your non-EPSON scanner from being
> #               recognized.
> #               Depending on your distribution, you may need either the
> #               first or the second entry.
> #usb /dev/usb/scanner0
> #usb /dev/usb/scanner0
>
> # Try USB printers -- this line is required (bug #122328)
> usb 0x4b8 0x0110
>
>
> The entry for the scanner in /etc/hotplug/usb/libsane.usermap is:
> # Epson Corp.|Perfection 1650 / 1650 Photo
> libusbscanner             0x0003      0x04b8   0x0110    0x0000       
> 0x0000
>    0x00         0x00            0x00            0x00            0x00
>    0x00               0x00000000
>
>
>
>
>
> -- 
> sane-devel mailing list: sane-devel@lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request@lists.alioth.debian.org