[sane-devel] Canoscan Lide 20, suse 9.3

[John Charles Considine]

When configuring a Canon Lide20 scanner through Yast, the scanner is
detected as:

"USB scanner (vendor=0x04a9 [Canon], product=0x2213 [CanoScan],
chip=GL841) at libusb:001:003"

yet when I associate it with the Canoscan Lide20 scanner, the plustek
driver is associated, but the 'Associated Scanner' remains blank.

Any ideas?

JC

Tardis:~ # sane-find-scanner

  # No SCSI scanners found. If you expected something different, make
sure that
  # you have loaded a SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04a9 [Canon], product=0x2213 [CanoScan],
chip=GL841)
  # Your USB scanner was (probably) detected. It may or may not be
supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary
ports
  # can't be detected by this program.

Tardis:~ # scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20050824/4c4f1d53/attachment.htm