[Fwd: [sane-devel] Two problems scanning hp scanjet 7400c]
René Rebe
rene at exactcode.de
Thu Dec 1 18:41:57 UTC 2005
Hi,
On Monday 28 November 2005 02:04, Erik P. Olsen wrote:
> > sorry for the slow response. I think your issue no. 1 might^Wshould be
> > fixed in my code from:
> >
> > http://svn.exactcode.de/sane-avision/trunk/backend/
>
> This was even worse. Now the scanner won't start. I am getting an error
> box saying: "Failed to start scanner. Error during device I/O". I've
> sent you in a separate mail a debug listing of this new problem.
Ok, well finally I placed the 7450 from the dusty corner onto my desk.
The only problem I could encounter (using my SVN:HEAD code of course) was,
that the calibration was optimized away entirely. And thus consecutive
flatbed scans made this scanner hang.
I commited this optimization out for now (I need to rethink for what
model I added this). Commited as revision 286, BUILD 178.
> > If your problem no. 2 still exists in that code please drop me a note
> > and I'll remove the dust from the HP 7400 in the corner and see what
> > I can do.
>
> As the scanner doesn't start I cannot test problem no. 2.
1bit, dither, gray and color work well here - in flatbed and ADF mode.
Can you retest with the svn HEAD code please? Please mail me a log with
SANE_DEBUG_AVISION=8 if there is still a problem (yes 8 instead of the
usually requested 7, since 8 logg more USB low level i/o ...).
Btw. do you use the scanner via USB or SCSI? I tested USB today.
Yours,
--
René Rebe - Rubensstr. 64 - 12157 Berlin (Europe / Germany)
http://www.exactcode.de | http://www.t2-project.org
+49 (0)30 255 897 45
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20051201/f586088a/attachment-0001.pgp
More information about the sane-devel
mailing list