[sane-devel] Epson Perfection 1250Photo doesn't work.
Thu Jul 14 06:29:45 UTC 2005
I'd like to report the problem with Epson Perfection 1250 Photo and latest
What's the problem. Scanner is detected by sane-find-scanner:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure
# you have loaded a SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04b8 [EPSON], product=0x010f [EPSON Scanner
010F], chip=LM9832/3) at libusb:001:006
# Your USB scanner was (probably) detected. It may or may not be
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
But can't be identified by scanimage:
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
And finally the most important is that everything was okey before latest
changes in plustek backend. So I think something is wrong with that.
More information about the sane-devel