[sane-devel] CanoScan LiDE 25
Olaf Leidinger
leidola@newcon.de
Fri, 01 Jul 2005 10:48:10 +0200
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello List!
I just unpacked my brand new "CanoScan LiDE 25", which isn't listed on
the supported devices list (probably because it's released a month ago).
Well, here is what I found out:
It seems to use the same chipset as LiDE 20 (LM9832/3). So it might be
supported by the plustek-backed. What might I do to test it further?
scanimage -L said no scanners were identified....
***************************************
This is sane-find-scanner from sane-backends 1.0.15
searching for SCSI scanners:
[snip]
searching for USB scanners:
[snip]
trying libusb:
<device descriptor of 0x0000/0x0000 at 003:001 (Linux 2.6.10-5-k7
ehci_hcd nVidia Corporation nForce2 USB Controller)>
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 1
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.10-5-k7 ehci_hcd)
iProduct 2 (nVidia Corporation nForce2 USB Controller)
iSerialNumber 1 (0000:00:02.2)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 12 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x046d/0xc504 at 002:003 (Logitech USB Receiver)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046D
idProduct 0xC504
bcdDevice 19.10
iManufacturer 1 (Logitech)
iProduct 2 (USB Receiver)
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 160 (Remote Wakeup)
MaxPower 50 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3
bInterfaceSubClass 1
bInterfaceProtocol 1
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 10 ms
bRefresh 0
bSynchAddress 0
<interface 1>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3
bInterfaceSubClass 1
bInterfaceProtocol 2
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 10 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x0000/0x0000 at 002:001 (Linux 2.6.10-5-k7
ohci_hcd nVidia Corporation nForce2 USB Controller (#2))>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.10-5-k7 ohci_hcd)
iProduct 2 (nVidia Corporation nForce2 USB Controller (#2))
iSerialNumber 1 (0000:00:02.1)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 255 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x04a9/0x2220 at 001:002 (Canon CanoScan)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255
bDeviceSubClass 0
bDeviceProtocol 255
bMaxPacketSize0 8
idVendor 0x04A9
idProduct 0x2220
bcdDevice 1.00
iManufacturer 1 (Canon)
iProduct 2 (CanoScan)
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 160 (Remote Wakeup)
MaxPower 500 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 16 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 (out 0x03)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bDeviceSubClass = 0x0)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GT-8911 ...
this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass
= 255)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bcdUSB = 0x110)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceSubClass = 0x0)
checking for LM983[1,2,3] ...
<This USB chip looks like a LM9832/3>
found USB scanner (vendor=0x04a9 [Canon], product=0x2220 [CanoScan],
chip=LM9832/3) at libusb:001:002
<device descriptor of 0x0000/0x0000 at 001:001 (Linux 2.6.10-5-k7
ohci_hcd nVidia Corporation nForce2 USB Controller)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 (Linux 2.6.10-5-k7 ohci_hcd)
iProduct 2 (nVidia Corporation nForce2 USB Controller)
iSerialNumber 1 (0000:00:02.0)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 255 ms
bRefresh 0
bSynchAddress 0
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
done
*******************************************************************************
cat /proc/bus/usb/devices:
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.10-5-k7 ehci_hcd
S: Product=nVidia Corporation nForce2 USB Controller
S: SerialNumber=0000:00:02.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 28/900 us ( 3%), #Int= 2, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.10-5-k7 ohci_hcd
S: Product=nVidia Corporation nForce2 USB Controller (#2)
S: SerialNumber=0000:00:02.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c504 Rev=13.10
S: Manufacturer=Logitech
S: Product=USB Receiver
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 50mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.10-5-k7 ohci_hcd
S: Product=nVidia Corporation nForce2 USB Controller
S: SerialNumber=0000:00:02.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=04a9 ProdID=2220 Rev= 1.00
S: Manufacturer=Canon
S: Product=CanoScan
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=16ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFCxQNK4Yz1Ukx83/kRArAfAKCZaI9Y/4acmAly98STcjlYGaUv4QCfUFW2
kkQj3H7jKyRv1v4plvBhzvs=
=LwDR
-----END PGP SIGNATURE-----