[sane-devel] CanoScan LiDE 25

[Olaf Leidinger]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Gerhard,

> 
> could you please try:
> export SANE_DEBUG_PLUSTEK=255 ; scanimage -L
> and send us the output?

[sanei_debug] Setting debug level of plustek to 255.
[plustek] Plustek backend V0.49-6, part of sane-backends 1.0.15-cvs
[plustek] Retrieving all supported and conntected devices
[plustek] Checking for 0x07b3-0x0010
[plustek] Checking for 0x07b3-0x0011
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0015
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0013
[plustek] Checking for 0x07b3-0x0013
[plustek] Checking for 0x07b3-0x0011
[plustek] Checking for 0x07b3-0x0010
[plustek] Checking for 0x07b3-0x0014
[plustek] Checking for 0x07b3-0x0015
[plustek] Checking for 0x07b3-0x0014
[plustek] Checking for 0x07b3-0x0016
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0017
[plustek] Checking for 0x07b3-0x0007
[plustek] Checking for 0x07b3-0x000f
[plustek] Checking for 0x07b3-0x000f
[plustek] Checking for 0x07b3-0x0005
[plustek] Checking for 0x07b3-0x0014
[plustek] Checking for 0x07b3-0x0012
[plustek] Checking for 0x0400-0x1000
[plustek] Checking for 0x0400-0x1001
[plustek] Checking for 0x0400-0x1001
[plustek] Checking for 0x0458-0x2007
[plustek] Checking for 0x0458-0x2008
[plustek] Checking for 0x0458-0x2009
[plustek] Checking for 0x0458-0x2013
[plustek] Checking for 0x0458-0x2015
[plustek] Checking for 0x0458-0x2016
[plustek] Checking for 0x03f0-0x0505
[plustek] Checking for 0x03f0-0x0605
[plustek] Checking for 0x04b8-0x010f
[plustek] Checking for 0x04b8-0x011d
[plustek] Checking for 0x1606-0x0050
[plustek] Checking for 0x1606-0x0060
[plustek] Checking for 0x1606-0x0160
[plustek] Checking for 0x049f-0x001a
[plustek] Checking for 0x04a9-0x2206
[plustek] Checking for 0x04a9-0x2207
[plustek] Checking for 0x04a9-0x2208
[plustek] Checking for 0x04a9-0x220d
[plustek] Checking for 0x04a9-0x220e
[plustek] Checking for 0x04a9-0x2220
[plustek] Available and supported devices:
[plustek] Device: >libusb:001:003< - 0x04a9x0x2220
[plustek] attach (auto, 0xbfffcb20, (nil))
[plustek] Device configuration:
[plustek] device name  : ><
[plustek] USB-ID       : ><
[plustek] model ovr.   : 0
[plustek] warmup       : -1s
[plustek] lampOff      : -1
[plustek] lampOffOnEnd : yes
[plustek] cacheCalData : no
[plustek] altCalibrate : no
[plustek] skipCalibr.  : no
[plustek] skipFine     : no
[plustek] skipFineWhite: no
[plustek] invertNegs.  : no
[plustek] dis.Speedup  : no
[plustek] pos_x        : 0
[plustek] pos_y        : 0
[plustek] pos_shading_y: -1
[plustek] neg_x        : 0
[plustek] neg_y        : 0
[plustek] neg_shading_y: -1
[plustek] tpa_x        : 0
[plustek] tpa_y        : 0
[plustek] tpa_shading_y: -1
[plustek] red gain     : -1
[plustek] green gain   : -1
[plustek] blue gain    : -1
[plustek] red offset   : -1
[plustek] green offset : -1
[plustek] blue offset  : -1
[plustek] red lampoff  : -1
[plustek] green lampoff: -1
[plustek] blue lampoff : -1
[plustek] red Gamma    : 1.00
[plustek] green Gamma  : 1.00
[plustek] blue Gamma   : 1.00
[plustek] gray Gamma   : 1.00
[plustek] ---------------------
[plustek] usbDev_open(auto,) - 0x842df38
[plustek] sanei_access_lock failed: 11
[plustek] open failed: -1
device `mustek_pp:debug' is a mustek_pp debugger software emulated
device `test:0' is a Noname frontend-tester virtual device
device `test:1' is a Noname frontend-tester virtual device

By the way... scanimage -L only finds the backends when disabling
dynamic linking. There is probably something wrong when configuring the
backends. I use

configure --prefix=/usr --sysconfdir=/etc  [--disable-shared ]

Thanks a lot,


Olaf Leidinger
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFC20rB4Yz1Ukx83/kRAsptAKCJZTYthdnIxq1B0O67uMW7NFkRUQCeJCep
i2sM0mMRgoCSnf1l5ysKHok=
=xChc
-----END PGP SIGNATURE-----