[sane-devel] UMAX Astra 2200su
Tony van der Hoff
tony@vanderhoff.org
Mon, 6 Jun 2005 18:17:51 +0100
Hi,
I've persuaded my scanner to communicate with SANE over the USB, but am
still failing to get it to scan. Maybe my configuration is at fault.
SANE_DEBUG_UMAX=255 scanimage -d umax results as below, but I don't really
understand what it's all about. Can anyone point me in the right direction,
please?
[sanei_debug] Setting debug level of umax to 255.
[umax] sane_init
[umax] This is sane-umax version 1.0 build 44
[umax] compiled with USB support for Astra 2200
[umax] (C) 1997-2002 by Oliver Rauch
[umax] EMAIL: Oliver.Rauch@rauch-domain.de
[umax] reading configure file umax.conf
[umax] option scsi-maxqueue = 2
[umax] option scsi-buffer-size-min = 65536
[umax] option scsi-buffer-size-max = 262144
[umax] option scan-lines = 40
[umax] option preview-lines = 10
[umax] option handle-bad-sense-error = 0
[umax] option execute-request-sense = 0
[umax] option force-preview-bit-rgb = 0
[umax] option slow-speed = -1
[umax] option care-about-smearing = -1
[umax] option calibration-full-ccd = -1
[umax] option calibration-width-offset = -99999
[umax] option calibration-bytes-pixel = -1
[umax] option exposure-time-rgb-bind = 0
[umax] option lamp-control-available = 0
[umax] option connection-type = 2
[umax] sanei_usb_attach_matching_devices(usb 0x1606 0x0230)
[umax] attach_scanner: libusb:001:011, connection_type 2
[umax] attach_scanner: opening usb device libusb:001:011
[umax] Initializing the PV8630
[umax] PV8630 initialized
[umax] attach_scanner: allocating SCSI buffer[0]
[umax] init
[umax] setting request_scsi_maxqueue = 1 for USB connection
[umax] request_scsi_maxqueue = 1
[umax] request_preview_lines = 10
[umax] request_scan_lines = 40
[umax] handle_bad_sense_error = 0
[umax] execute_request_sense = 0
[umax] scsi_buffer_size_min = 65536
[umax] scsi_buffer_size_max = 262144
[umax] force_preview_bit_rgb = 0
[umax] slow = -1
[umax] smear = -1
[umax] calibration_area = -1
[umax] calibration_width_offset = -99999
[umax] calibration_width_offset_batch = -99999
[umax] calibration_bytespp = -1
[umax] exposure_time_rgb_bind = 0
[umax] invert_shading_data = -1
[umax] lamp_control_available = 0
[umax] backend runs on little endian machine
[umax] variable scsi buffer size (usage of sanei_scsi_open_extended)
[umax] initialize_values
[umax] identify_scanner
[umax] do_inquiry
[umax] Sending SCSI cmd 0x12 cdb len 6, param len 0, result len 5
[umax] SCSI cmd returned 5 bytes
[umax] SCSI command successfully executed
[umax] Sending SCSI cmd 0x12 cdb len 6, param len 0, result len 160
[umax] SCSI cmd returned 160 bytes
[umax] SCSI command successfully executed
[umax] Found UMAX scanner Astra 2200 version V2.2 on device libusb:001:011
[umax] umax_correct_inquiry("UMAX Astra 2200 V2.2")
[umax] setting up special options for Astra 2200
[umax] - lamp control enabled
[umax] - calibration by driver is done for each CCD pixel
[umax] - setting calibration_bytespp = 2
[umax] - common x and y resolution
[umax] - disabling quality calibration for USB connection
[umax] get_inquiry_values
[umax] INQUIRY:
[umax] ========
[umax]
[umax] vendor........................: 'UMAX '
[umax] product.......................: 'Astra 2200 '
[umax] version.......................: 'V2.2'
[umax] peripheral qualifier..........: 0
[umax] peripheral device type........: 6
[umax]
[umax] CBHS value range..............: 0-255
[umax] scanmode......................: flatbed (FB)
[umax] UTA (transparency)............: available
[umax] UTA lamp status ..............: on
[umax]
[umax] inquiry block length..........: 160 bytes
[umax]
[umax] ISO Version (reserved).......: 0
[umax] ECMA Version (reserved).......: 0
[umax] ANSI Version .................: 2
[umax]
[umax] reserved byte 0x05 = 0
[umax] reserved byte 0x06 = 0
[umax]
[umax] scsi features (00):
[umax] -------------------
[umax]
[umax] f/w support function:
[umax] ---------------------
[umax] - fast preview function
[umax]
[umax] reserved byte 0x36 = 0
[umax] reserved byte 0x37 = 0
[umax]
[umax] scan modes (76):
[umax] ----------------
[umax] - single pass color mode
[umax] - lineart mode
[umax] - gray mode
[umax] - color mode
[umax] - transparency (UTA)
[umax]
[umax] scanner capability (be, 00, 00):
[umax] --------------------------------
[umax] - send high byte first
[umax] - bi-level image reverse
[umax] - multi-level image reverse
[umax] - paper length can reach to 14 inch
[umax]
[umax] gamma download available
[umax] gamma download type 2
[umax] lines of gamma curve: one line (gray), three lines (color) download
[umax] gamma input 8 bits/pixel support
[umax] gamma input 12 bits/pixel support
[umax] gamma output 8 bits/pixel support
[umax] gamma output 12 bits/pixel support
[umax]
[umax] reserved byte 0x65 = 0
[umax] reserved byte 0x67 = 0
[umax]
[umax] reserved byte 0x6b = 0
[umax] reserved byte 0x6c = 0
[umax]
[umax] color sequence............................: all supported
[umax] color ordering support....................: pixel
[umax]
[umax] maximum video memory......................: 223 KB
[umax]
[umax] reserved byte 0x72 = 0
[umax]
[umax] optical resolution........................: 600 dpi
[umax] maximum x-resolution......................: 600 dpi
[umax] maximum y-resolution......................: 1200 dpi
[umax]
[umax] FB (flatbed-mode):
[umax] FB maximum scan width.....................: 8.50 inch
[umax] FB maximum scan length....................: 11.70 inch
[umax]
[umax] UTA (transparency-mode):
[umax] UTA x-original point......................: 0.00 inch
[umax] UTA y-original point......................: 0.00 inch
[umax] UTA maximum scan width....................: 4.00 inch
[umax] UTA maximum scan length...................: 5.00 inch
[umax]
[umax] reserved byte 0x82 = 128
[umax]
[umax] DOR (double optical resolution-mode):
[umax] DOR optical resolution....................: 0 dpi
[umax] DOR maximum x-resolution..................: 0 dpi
[umax] DOR maximum y-resolution..................: 0 dpi
[umax] DOR x-original point......................: 0.00 inch
[umax] DOR y-original point......................: 0.00 inch
[umax] DOR maximum scan width....................: 0.00 inch
[umax] DOR maximum scan length...................: 0.00 inch
[umax]
[umax] reserved byte 0x8e = 0
[umax]
[umax] last calibration lamp density.............: 0
[umax]
[umax] reserved byte 0x90 = 0
[umax]
[umax] lamp warmup maximum time..................: 0 sec
[umax] window descriptor block length............: 82 bytes
[umax] no analog gamma function
[umax]
[umax] reserved byte 0x98 = 0
[umax] reserved byte 0x99 = 0
[umax]
[umax] maximum calibration data lines for shading: 64
[umax] fb/uta: color line arrangement mode.......: 0
[umax] adf: color line arrangement mode.......: 0
[umax] CCD line distance.........................: 8
[umax]
[umax] reserved byte 0x9e = 0
[umax]
[umax] ==================== end of inquiry ====================
[umax]
[umax] x_range.max = 215.899994
[umax] y_range.max = 297.179993
[umax] x_dpi_range.max = 600.000000
[umax] y_dpi_range.max = 1200.000000
[umax] option connection-type = 2
[umax] attach_scanner: /dev/usbscanner, connection_type 2
[umax] attach_scanner: opening usb device /dev/usbscanner
[umax] sanei_umaxusb_open: open of `/dev/usbscanner' failed: Invalid
argument
[umax] ERROR: attach_scanner: opening usb device /dev/usbscanner failed
[umax] finished reading configure file
[umax] sane_open
[umax] sane_open: no devicename, opening first device
[umax] Using 12 bits for gamma input
[umax] init_options
[umax] set mode [#2] to Color
[umax] get [#0]
[umax] get [#0]
[umax] sane_get_option_descriptor 0
[umax] sane_get_option_descriptor 1
[umax] sane_get_option_descriptor 2
[umax] sane_get_option_descriptor 3
[umax] sane_get_option_descriptor 4
[umax] sane_get_option_descriptor 5
[umax] sane_get_option_descriptor 6
[umax] sane_get_option_descriptor 7
[umax] sane_get_option_descriptor 8
[umax] sane_get_option_descriptor 9
[umax] sane_get_option_descriptor 10
[umax] sane_get_option_descriptor 11
[umax] get br-x [#11]
[umax] sane_get_option_descriptor 12
[umax] get br-y [#12]
[umax] sane_get_option_descriptor 13
[umax] sane_get_option_descriptor 14
[umax] sane_get_option_descriptor 15
[umax] sane_get_option_descriptor 16
[umax] sane_get_option_descriptor 17
[umax] sane_get_option_descriptor 18
[umax] sane_get_option_descriptor 19
[umax] sane_get_option_descriptor 20
[umax] sane_get_option_descriptor 21
[umax] sane_get_option_descriptor 22
[umax] sane_get_option_descriptor 23
[umax] sane_get_option_descriptor 24
[umax] sane_get_option_descriptor 25
[umax] sane_get_option_descriptor 26
[umax] sane_get_option_descriptor 27
[umax] sane_get_option_descriptor 28
[umax] sane_get_option_descriptor 29
[umax] sane_get_option_descriptor 30
[umax] sane_get_option_descriptor 31
[umax] sane_get_option_descriptor 32
[umax] sane_get_option_descriptor 33
[umax] sane_get_option_descriptor 34
[umax] sane_get_option_descriptor 35
[umax] sane_get_option_descriptor 36
[umax] sane_get_option_descriptor 37
[umax] sane_get_option_descriptor 38
[umax] sane_get_option_descriptor 39
[umax] sane_get_option_descriptor 40
[umax] sane_get_option_descriptor 41
[umax] sane_get_option_descriptor 42
[umax] sane_get_option_descriptor 43
[umax] sane_get_option_descriptor 44
[umax] sane_get_option_descriptor 45
[umax] sane_get_option_descriptor 46
[umax] sane_get_option_descriptor 47
[umax] sane_get_option_descriptor 48
[umax] sane_get_option_descriptor 49
[umax] sane_get_option_descriptor 50
[umax] sane_get_option_descriptor 51
[umax] sane_get_option_descriptor 52
[umax] sane_get_option_descriptor 53
[umax] sane_get_option_descriptor 54
[umax] sane_get_option_descriptor 55
[umax] sane_get_option_descriptor 56
[umax] sane_get_option_descriptor 57
[umax] sane_get_option_descriptor 58
[umax] sane_get_option_descriptor 59
[umax] sane_get_option_descriptor 60
[umax] sane_get_option_descriptor 61
[umax] sane_get_option_descriptor 62
[umax] sane_get_option_descriptor 63
[umax] sane_get_option_descriptor 64
[umax] sane_get_option_descriptor 65
[umax] sane_get_option_descriptor 66
[umax] sane_get_option_descriptor 67
[umax] get tl-x [#9]
[umax] get tl-y [#10]
[umax] get tl-x [#9]
[umax] sane_get_option_descriptor 11
[umax] set br-x [#11] to 215.899994
[umax] get tl-y [#10]
[umax] sane_get_option_descriptor 12
[umax] set br-y [#12] to 297.179993
[umax] sane_start
[umax] initialize_values
[umax] Using 12 bits for gamma input
[umax] Using 8 bits for output
[umax] check_values
[umax] using one pass scanning mode
[umax] scanner uses color-pixel-ordering
[umax] sane_get_parameters
[umax] x_resolution (dpi) = 100
[umax] y_resolution (dpi) = 100
[umax] x_coordinate_base (dpi) = 1200
[umax] y_coordinate_base (dpi) = 1200
[umax] upper_left_x (xbase) = 0
[umax] upper_left_y (ybase) = 0
[umax] scanwidth (xbase) = 10199
[umax] scanlength (ybase) = 14039
[umax] width in pixels = 850
[umax] length in pixels = 1170
[umax] bits per pixel/color = 8
[umax] bytes per line = 2550
[umax] pixels_per_line = 850
[umax] lines = 1170
[umax] negative = 0
[umax] threshold (lineart) = 127
[umax] brightness (halftone) = 127
[umax] contrast (halftone) = 127
[umax] analog_gamma = 0 0 0
[umax] highlight = 255 255 255
[umax] shadow = 0 0 0
[umax] calibrat. exposure time = 0 0 0
[umax] scan exposure time = 0 0 0
[umax] calibration mode number = 0
[umax] batch scan = 0
[umax] batch end = 0
[umax] batch next top left y = 14039
[umax] quality calibration = 0
[umax] warm up = 0
[umax] fast preview function = 0
[umax] DOR = 0
[umax] ADF = 0
[umax] manual focus = 0
[umax] fix focus position = 0
[umax] disable pre focus = 0
[umax] lens cal in doc pos = 0
[umax] holder focus pos 0mm = 0
[umax] Initializing the PV8630
[umax] PV8630 initialized
[umax] sane_start: umax_scsi_open_extended returned scsi buffer size = 65536
[umax] sane_start: buffer size has changed, reallocating buffer
[umax] sane_start: freeing SCSI buffer[0]
[umax] sane_start: allocating SCSI buffer[0]
[umax] grab_scanner
[umax] wait_scanner
[umax] Sending SCSI cmd 0x00 cdb len 6, param len 0, result len 0
[umax] SCSI command successfully executed
[umax] scanner ready
[umax] Sending SCSI cmd 0x16 cdb len 6, param len 0, result len 0
[umax] SCSI command successfully executed
[umax] scanner reserved
[umax] sending 3 * 4096 bytes of gamma data for RGB
[umax] send_gamma_data
[umax] using gamma download curve format type 2
[umax] Sending SCSI cmd 0x2a cdb len 10, param len 12294, result len 0
[umax] error in sanei_pv8630_bulkread (got a5)
[umax] umax_send_gamma_data(DCF=2): command returned status Error during
device I/O
[umax] set_window_param
[umax] window descriptor block created with 82 bytes
[umax] Sending SCSI cmd 0x24 cdb len 10, param len 254, result len 0
[umax] error in sanei_pv8630_bulkread (got a5)
[umax] umax_set_window_param: command returned status Error during device
I/O
[umax] start_scan
[umax] starting scan
[umax] Sending SCSI cmd 0x1b cdb len 6, param len 1, result len 0
[umax] error in sanei_pv8630_bulkread (got a5)
[umax] umax_start_scan: command returned status Error during device I/O
[umax] trying to release scanner ...
[umax] Sending SCSI cmd 0x17 cdb len 6, param len 0, result len 0
[umax] error in sanei_pv8630_bulkread (got a5)
[umax] umax_give_scanner: command returned status Error during device I/O
[umax] trying to reposition scanner ...
[umax] Sending SCSI cmd 0x31 cdb len 10, param len 0, result len 0
[umax] error in sanei_pv8630_bulkread (got a5)
[umax] umax_reposition_scanner: command returned status Error during device
I/O
scanimage: sane_start: Error during device I/O
[umax] sane_cancel
[umax] do_cancel
[umax] trying to release scanner ...
[umax] Sending SCSI cmd 0x17 cdb len 6, param len 0, result len 0
[umax] error in sanei_pv8630_bulkread (got a5)
[umax] umax_give_scanner: command returned status Error during device I/O
[umax] trying to reposition scanner ...
[umax] Sending SCSI cmd 0x31 cdb len 10, param len 0, result len 0
[umax] error in sanei_pv8630_bulkread (got a5)
[umax] umax_reposition_scanner: command returned status Error during device
I/O
[umax] closing scannerdevice filedescriptor
[umax] sane_close
[umax] sane_exit
--
Tony van der Hoff | mailto:tony@vanderhoff.org
Buckinghamshire, England