[sane-devel] Saned

[Henning Meier-Geinitz]

Hi,

On Tue, Jun 14, 2005 at 09:56:15AM +0200, Giuseppe Sacco wrote:
> I started asking about this problem in this list a week ago. You may
> have a look at the complete thread at
> http://lists.alioth.debian.org/pipermail/sane-devel/2005-June/013745.html
> but, sadly, I have still to find the solution.

???

I think I have given an answer. Maybe I miss the point but the way I
described is just the normal way to scan an image. That works also
with saned (and has been working for years). 

Example with saned and the test backend on localhost:

SANE_DEBUG_NET=255 scanimage -v -v -d net:localhost:test -T
[sanei_debug] Setting debug level of net to 255.
[net] sane_init: authorize = 0x80492c0, version_code = 0xbfffe7bc
[net] sane_init: SANE net backend version 1.0.13 (AF-indep+IPv6) from sane-backends 1.0.15-cvs
[...]
[net] sane_start
[net] sane_start: remote start
[net] sane_start: server has little endian byte order
[net] sane_start: remote start finished, data at port 32776
[net] sane_start: done (Success)
[net] sane_get_parameters
[net] sane_get_parameters: remote get parameters
[net] sane_get_parameters: returned status Success
scanimage: scanning image of size 157x196 pixels at 8 bits/pixel
scanimage: acquiring gray frame, 8 bits/sample
scanimage: reading one scanline, 157 bytes... 
[net] sane_read: handle=0x80553e8, data=0x805af88, max_length=157, length=0xbfffe7cc
[net] sane_read: reading paket length
[net] sane_read: read 4 bytes, 0 from 4 total
[net] sane_read: next record length=8188 bytes
[net] sane_read: 157 bytes read, 8031 remaining
[...]

Bye,
  Henning