[sane-devel] UMAX Astra aborts in high resolution scans
Michael Stutz
stutz@dsl.org
Fri, 11 Mar 2005 11:32:05 -0500
I have a UMAX Astra 1220S scanner connected to a BusLogic SCSI card that
I've used with SANE for years, but recently (possibly after a software
upgrade) it has been giving me headache & trouble, and I have just about
lost my wits.
I am suddenly unable to scan images at higher resolutions. Without
specifying the resolution, the scanner works flawlessly ... at the
default of 100 dpi. But when the resolution is specified with
"--resolution" just as I've always done it, and I give any value greater
than about 150, the scanner will begin to scan (and produce output) but
then exit almost immediately, and only a tiny portion of the specified
area is actually scanned.
Typescript follows ... assistance is greatly appreciated.
Script started on Fri Mar 11 10:14:41 2005
gatsby:/home/m# export SANE_DEBUG_UMAX=12
gatsby:/home/m# echo $SANE_DEBUG_UMAX
12
gatsby:/home/m# scanimage -d umax:/dev/sg1 -v -y 165 -x 120 --resolution 300 > b
[sanei_debug] Setting debug level of umax to 12.
[umax] sane_init
[umax] This is sane-umax version 1.0 build 32
[umax] compiled with pipe for inter-process-data-transfer
[umax] (C) 1997-2001 by Oliver Rauch
[umax] EMAIL: Oliver.Rauch@rauch-domain.de
[umax] reading configure file umax.conf
[umax] attach_matching_devices(scsi UMAX * Scanner)
[umax] attach_scanner: /dev/sg1
[umax] attach_scanner: opening /dev/sg1
[umax] attach_scanner: sanei_scsi_open_extended returned scsi buffer size = 16384
[umax] attach_scanner: allocating SCSI buffer[0]
[umax] init
[umax] request_scsi_maxqueue = 2
[umax] request_preview_lines = 10
[umax] request_scan_lines = 40
[umax] handle_bad_sense_error = 0
[umax] execute_request_sense = 0
[umax] scsi_buffer_size_min = 32768
[umax] scsi_buffer_size_max = 131072
[umax] force_preview_bit_rgb = 0
[umax] slow = -1
[umax] smear = -1
[umax] calibration_area = -1
[umax] calibration_width_offset = -99999
[umax] calibration_bytespp = -1
[umax] invert_shading_data = -1
[umax] lamp_control_available = 0
[umax] backend runs on little endian machine
[umax] variable scsi buffer size (usage of sanei_scsi_open_extended)
[umax] initialize_values
[umax] identify_scanner
[umax] do_inquiry
[umax] Found UMAX scanner Astra 1220S version V1.1 on device /dev/sg1
[umax] umax_correct_inquiry("UMAX Astra 1220S V1.1")
[umax] setting up special options for Astra 1220S
[umax] - 16 bit gamma table is created lsb padded
[umax] get_inquiry_values
[umax] INQUIRY:
[umax] ========
[umax]
[umax] vendor........................: 'UMAX '
[umax] product.......................: 'Astra 1220S '
[umax] version.......................: 'V1.1'
[umax] peripheral qualifier..........: 0
[umax] peripheral device type........: 6
[umax]
[umax] CBHS value range..............: 0-255
[umax] scanmode......................: flatbed (FB)
[umax] inquiry block length..........: 160 bytes
[umax]
[umax] ISO Version (reserved).......: 0
[umax] ECMA Version (reserved).......: 0
[umax] ANSI Version .................: 2
[umax]
[umax] reserved byte 0x05 = 0
[umax] reserved byte 0x06 = 0
[umax]
[umax] scsi features (00):
[umax] -------------------
[umax]
[umax] f/w support function:
[umax] ---------------------
[umax] - quality calibration
[umax] - fast preview function
[umax]
[umax] reserved byte 0x36 = 0
[umax] reserved byte 0x37 = 0
[umax]
[umax] scan modes (76):
[umax] ----------------
[umax] - single pass color mode
[umax] - lineart mode
[umax] - gray mode
[umax] - color mode
[umax] - transparency (UTA)
[umax]
[umax] scanner capability (be, 00, 00):
[umax] --------------------------------
[umax] - send high byte first
[umax] - bi-level image reverse
[umax] - multi-level image reverse
[umax] - paper length can reach to 14 inch
[umax]
[umax] gamma download available
[umax] gamma download type 2
[umax] lines of gamma curve: one line (gray), three lines (color) download
[umax] gamma input 8 bits/pixel support
[umax] gamma input 12 bits/pixel support
[umax] gamma output 8 bits/pixel support
[umax] gamma output 12 bits/pixel support
[umax]
[umax] reserved byte 0x65 = 0
[umax] reserved byte 0x67 = 0
[umax]
[umax] reserved byte 0x6b = 0
[umax] reserved byte 0x6c = 0
[umax]
[umax] color sequence............................: all supported
[umax] color ordering support....................: pixel
[umax]
[umax] maximum video memory......................: 223 KB
[umax]
[umax] reserved byte 0x72 = 0
[umax]
[umax] optical resolution........................: 600 dpi
[umax] maximum x-resolution......................: 600 dpi
[umax] maximum y-resolution......................: 1200 dpi
[umax]
[umax] FB (flatbed-mode):
[umax] FB maximum scan width.....................: 8.50 inch
[umax] FB maximum scan length....................: 11.70 inch
[umax]
[umax] UTA (transparency-mode):
[umax] UTA x-original point......................: 0.00 inch
[umax] UTA y-original point......................: 0.00 inch
[umax] UTA maximum scan width....................: 8.50 inch
[umax] UTA maximum scan length...................: 10.60 inch
[umax]
[umax] reserved byte 0x82 = 0
[umax]
[umax] DOR (double optical resolution-mode):
[umax] DOR optical resolution....................: 0 dpi
[umax] DOR maximum x-resolution..................: 0 dpi
[umax] DOR maximum y-resolution..................: 0 dpi
[umax] DOR x-original point......................: 0.00 inch
[umax] DOR y-original point......................: 0.00 inch
[umax] DOR maximum scan width....................: 0.00 inch
[umax] DOR maximum scan length...................: 0.00 inch
[umax]
[umax] reserved byte 0x8e = 0
[umax]
[umax] last calibration lamp density.............: 0
[umax]
[umax] reserved byte 0x90 = 0
[umax]
[umax] lamp warmup maximum time..................: 0 sec
[umax] window descriptor block length............: 82 bytes
[umax] no analog gamma function
[umax]
[umax] reserved byte 0x98 = 0
[umax] reserved byte 0x99 = 0
[umax]
[umax] maximum calibration data lines for shading: 64
[umax] fb/uta: color line arrangement mode.......: 0
[umax] adf: color line arrangement mode.......: 0
[umax] CCD line distance.........................: 8
[umax]
[umax] reserved byte 0x9e = 0
[umax]
[umax] ==================== end of inquiry ====================
[umax]
[umax] x_range.max = 215.899994
[umax] y_range.max = 297.179993
[umax] x_dpi_range.max = 600.000000
[umax] y_dpi_range.max = 1200.000000
[umax] attach_matching_devices(scsi LinoHell JADE)
[umax] attach_matching_devices(scsi LinoHell Office)
[umax] attach_matching_devices(scsi LinoHell Office2)
[umax] attach_matching_devices(scsi LinoHell SAPHIR2)
[umax] attach_matching_devices(scsi HDM LS4H1S)
[umax] attach_matching_devices(scsi Nikon AX-110)
[umax] attach_matching_devices(scsi Nikon AX-210)
[umax] attach_matching_devices(scsi KYE ColorPage-HR5)
[umax] attach_matching_devices(scsi EPSON Perfection600)
[umax] attach_matching_devices(scsi ESCORT "Galleria 600S")
[umax] attach_matching_devices(/dev/sg1)
[umax] attach_scanner: /dev/sg1
[umax] attach_scanner: opening /dev/sg1
[umax] attach_scanner: sanei_scsi_open_extended returned scsi buffer size = 16384
[umax] attach_scanner: allocating SCSI buffer[0]
[umax] init
[umax] request_scsi_maxqueue = 2
[umax] request_preview_lines = 10
[umax] request_scan_lines = 40
[umax] handle_bad_sense_error = 0
[umax] execute_request_sense = 0
[umax] scsi_buffer_size_min = 32768
[umax] scsi_buffer_size_max = 131072
[umax] force_preview_bit_rgb = 0
[umax] slow = -1
[umax] smear = -1
[umax] calibration_area = -1
[umax] calibration_width_offset = -99999
[umax] calibration_bytespp = -1
[umax] invert_shading_data = -1
[umax] lamp_control_available = 0
[umax] backend runs on little endian machine
[umax] variable scsi buffer size (usage of sanei_scsi_open_extended)
[umax] initialize_values
[umax] identify_scanner
[umax] do_inquiry
[umax] Found UMAX scanner Astra 1220S version V1.1 on device /dev/sg1
[umax] umax_correct_inquiry("UMAX Astra 1220S V1.1")
[umax] setting up special options for Astra 1220S
[umax] - 16 bit gamma table is created lsb padded
[umax] get_inquiry_values
[umax] INQUIRY:
[umax] ========
[umax]
[umax] vendor........................: 'UMAX '
[umax] product.......................: 'Astra 1220S '
[umax] version.......................: 'V1.1'
[umax] peripheral qualifier..........: 0
[umax] peripheral device type........: 6
[umax]
[umax] CBHS value range..............: 0-255
[umax] scanmode......................: flatbed (FB)
[umax] inquiry block length..........: 160 bytes
[umax]
[umax] ISO Version (reserved).......: 0
[umax] ECMA Version (reserved).......: 0
[umax] ANSI Version .................: 2
[umax]
[umax] reserved byte 0x05 = 0
[umax] reserved byte 0x06 = 0
[umax]
[umax] scsi features (00):
[umax] -------------------
[umax]
[umax] f/w support function:
[umax] ---------------------
[umax] - quality calibration
[umax] - fast preview function
[umax]
[umax] reserved byte 0x36 = 0
[umax] reserved byte 0x37 = 0
[umax]
[umax] scan modes (76):
[umax] ----------------
[umax] - single pass color mode
[umax] - lineart mode
[umax] - gray mode
[umax] - color mode
[umax] - transparency (UTA)
[umax]
[umax] scanner capability (be, 00, 00):
[umax] --------------------------------
[umax] - send high byte first
[umax] - bi-level image reverse
[umax] - multi-level image reverse
[umax] - paper length can reach to 14 inch
[umax]
[umax] gamma download available
[umax] gamma download type 2
[umax] lines of gamma curve: one line (gray), three lines (color) download
[umax] gamma input 8 bits/pixel support
[umax] gamma input 12 bits/pixel support
[umax] gamma output 8 bits/pixel support
[umax] gamma output 12 bits/pixel support
[umax]
[umax] reserved byte 0x65 = 0
[umax] reserved byte 0x67 = 0
[umax]
[umax] reserved byte 0x6b = 0
[umax] reserved byte 0x6c = 0
[umax]
[umax] color sequence............................: all supported
[umax] color ordering support....................: pixel
[umax]
[umax] maximum video memory......................: 223 KB
[umax]
[umax] reserved byte 0x72 = 0
[umax]
[umax] optical resolution........................: 600 dpi
[umax] maximum x-resolution......................: 600 dpi
[umax] maximum y-resolution......................: 1200 dpi
[umax]
[umax] FB (flatbed-mode):
[umax] FB maximum scan width.....................: 8.50 inch
[umax] FB maximum scan length....................: 11.70 inch
[umax]
[umax] UTA (transparency-mode):
[umax] UTA x-original point......................: 0.00 inch
[umax] UTA y-original point......................: 0.00 inch
[umax] UTA maximum scan width....................: 8.50 inch
[umax] UTA maximum scan length...................: 10.60 inch
[umax]
[umax] reserved byte 0x82 = 0
[umax]
[umax] DOR (double optical resolution-mode):
[umax] DOR optical resolution....................: 0 dpi
[umax] DOR maximum x-resolution..................: 0 dpi
[umax] DOR maximum y-resolution..................: 0 dpi
[umax] DOR x-original point......................: 0.00 inch
[umax] DOR y-original point......................: 0.00 inch
[umax] DOR maximum scan width....................: 0.00 inch
[umax] DOR maximum scan length...................: 0.00 inch
[umax]
[umax] reserved byte 0x8e = 0
[umax]
[umax] last calibration lamp density.............: 0
[umax]
[umax] reserved byte 0x90 = 0
[umax]
[umax] lamp warmup maximum time..................: 0 sec
[umax] window descriptor block length............: 82 bytes
[umax] no analog gamma function
[umax]
[umax] reserved byte 0x98 = 0
[umax] reserved byte 0x99 = 0
[umax]
[umax] maximum calibration data lines for shading: 64
[umax] fb/uta: color line arrangement mode.......: 0
[umax] adf: color line arrangement mode.......: 0
[umax] CCD line distance.........................: 8
[umax]
[umax] reserved byte 0x9e = 0
[umax]
[umax] ==================== end of inquiry ====================
[umax]
[umax] x_range.max = 215.899994
[umax] y_range.max = 297.179993
[umax] x_dpi_range.max = 600.000000
[umax] y_dpi_range.max = 1200.000000
[umax] finished reading configure file
[umax] sane_open
[umax] sane_open: devicename=/dev/sg1
[umax] Using 12 bits for gamma input
[umax] init_options
[umax] sane_start
[umax] initialize_values
[umax] Using 12 bits for gamma input
[umax] Using 8 bits for output
[umax] check_values
[umax] using one pass scanning mode
[umax] scanner uses color-pixel-ordering
[umax] sane_get_parameters
[umax] x_resolution (dpi) = 300
[umax] y_resolution (dpi) = 300
[umax] x_coordinate_base (dpi) = 1200
[umax] y_coordinate_base (dpi) = 1200
[umax] upper_left_x (xbase) = 0
[umax] upper_left_y (ybase) = 0
[umax] scanwidth (xbase) = 5669
[umax] scanlength (ybase) = 7795
[umax] width in pixels = 1417
[umax] length in pixels = 1948
[umax] bits per pixel/color = 8
[umax] bytes per line = 4251
[umax] pixels_per_line = 1417
[umax] lines = 1948
[umax] negative = 0
[umax] threshold (lineart) = 127
[umax] brightness (halftone) = 127
[umax] contrast (halftone) = 127
[umax] analog_gamma = 0 0 0
[umax] highlight = 255 255 255
[umax] shadow = 0 0 0
[umax] calibrat. exposure time = 0 0 0
[umax] scan exposure time = 0 0 0
[umax] calibration mode number = 0
[umax] quality calibration = 0
[umax] fast preview function = 0
[umax] DOR = 0
[umax] ADF = 0
[umax] manual focus = 0
[umax] fix focus position = 0
[umax] disable pre focus = 0
[umax] lens cal in doc pos = 0
[umax] holder focus pos 0mm = 0
[umax] sane_start: sanei_scsi_open_extended returned scsi buffer size = 56680
[umax] sane_start: buffer size has changed, reallocating buffer
[umax] sane_start: freeing SCSI buffer[0]
[umax] sane_start: allocating SCSI buffer[0]
[umax] grab_scanner
[umax] wait_scanner
[umax] scanner ready
[umax] scanner reserved
[umax] set_window_param
[umax] window descriptor block created with 82 bytes
[umax] window(s) set
[umax] start_scan
[umax] starting scan
[umax] do_calibration
[umax] wait_scanner
[umax] scanner reports Device busy, waiting ...
[umax] scanner ready
[umax] sane_get_parameters
scanimage: scanning image of size 1417x1948 pixels at 24 bits/pixel
scanimage: acquiring RGB frame
[umax] reader_process started
[umax] reader_process: allocating SCSI buffer[1]
[umax] reader_process: starting to READ data
[umax] trim_rowbufsize: row_bufsize = 55263 bytes = 13 lines
[umax] reading 8280948 bytes in blocks of 55263 bytes
[umax] wait_scanner
[umax] scanner ready
[umax] umax_queue_read_image_data_req for buffer[0]
[umax] umax_queue_read_image_data_req: id for buffer[0] is 0x8079360
[umax] umax_reader_process: read image data queued for buffer[0]
[umax] umax_queue_read_image_data_req for buffer[1]
[umax] umax_queue_read_image_data_req: id for buffer[1] is 0x8094ee8
[umax] umax_reader_process: read image data queued for buffer[1]
[umax] umax_wait_queued_image_data for buffer[0] (id=0x8079360)
[umax] umax_wait_queued_image_data: wait returned status Error during device I/O
[umax] ERROR: umax_reader_process: unable to get image data from scanner!
[umax] reader_process: freeing SCSI buffer[1]
[umax] reader_process: finished reading data
[umax] sane_read: read 0 bytes
[umax] do_cancel
[umax] killing reader_process
[umax] reader_process killed
[umax] trying to release scanner ...
[umax] umax_give_scanner: command returned status Error during device I/O
[umax] trying to reposition scanner ...
[umax] not waiting for finishing reposition scanner
[umax] closing scannerdevice filedescriptor
[umax] closing pipe
scanimage: min/max graylevel value = 255/0
[umax] sane_cancel
scanimage: read 0 bytes in total
[umax] sane_close
[umax] sane_exit
gatsby:/home/m#
Script done on Fri Mar 11 10:29:48 2005