[sane-devel] Nikon Coolscan III not recognised.
john
jdp-nola@cox.net
Tue, 17 May 2005 08:48:23 -0500
--Boundary-00=_nYfiC8oKLxXx0nr
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
I looked at sg0 & sg1 and all they contain is cdwriter nothing else. And "sane
debug coolscan2=255 scanimage -L" bash says command not found.
On Tuesday 17 May 2005 02:04 am, you wrote:
> > I hope that it is ok to post this here, if not let me know. I installed
> > ftp://rpmfind.net/linux/Mandrake/10.2/SRPMS/main/sane-1.0.15-7mdk.src.rpm
> > and the dependancies and everything seemed to install properly. When I
> > run the program from either the GUI interface or the command line or
> > sane-find-scanner it fails to find anything. My system is seeing the SCSI
> > interface which the scanner is attached to. Is there something I'm
> > missing. Any help would be greatly appreciated.
>
> Make sure that the user running scanimage/xsane/xscanimage has
> read/write permissions to the scanner's device file
> (/dev/sg*). There's no need to change any configuration files, the
> default must work just fine.
>
> If this fails, please post the output of "SANE_DEBUG_COOLSCAN2=255
> scanimage -L".
>
> Andras
--
open source takes the bullshit out of software
kernel 2.6.4 Mandriva 10.1
registered linux user: 389950
--Boundary-00=_nYfiC8oKLxXx0nr
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
<html><head><meta name="qrichtext" content="1" /></head><body style="font-size:10pt;font-family:Sans">
<p><span style="font-size:12pt">I looked at sg0 & sg1 and all they contain is cdwriter nothing else. And "sane debug coolscan2=255 scanimage -L" bash says command not found.</span></p>
<p></p>
<p>On Tuesday 17 May 2005 02:04 am, you wrote:</p>
<p>> > I hope that it is ok to post this here, if not let me know. I installed</p>
<p>> > ftp://rpmfind.net/linux/Mandrake/10.2/SRPMS/main/sane-1.0.15-7mdk.src.rpm</p>
<p>> > and the dependancies and everything seemed to install properly. When I</p>
<p>> > run the program from either the GUI interface or the command line or</p>
<p>> > sane-find-scanner it fails to find anything. My system is seeing the SCSI</p>
<p>> > interface which the scanner is attached to. Is there something I'm</p>
<p>> > missing. Any help would be greatly appreciated.</p>
<p>></p>
<p>> Make sure that the user running scanimage/xsane/xscanimage has</p>
<p>> read/write permissions to the scanner's device file</p>
<p>> (/dev/sg*). There's no need to change any configuration files, the</p>
<p>> default must work just fine.</p>
<p>></p>
<p>> If this fails, please post the output of "SANE_DEBUG_COOLSCAN2=255</p>
<p>> scanimage -L".</p>
<p>></p>
<p>> Andras</p>
<p></p>
<p>-- </p>
<p>open source takes the bullshit out of software</p>
<p>kernel 2.6.4 Mandriva 10.1</p>
<p>registered linux user: 389950</p>
</body></html>
--Boundary-00=_nYfiC8oKLxXx0nr--