[sane-devel] Samsung SCX4100 Works with Sane but not with Saned?

[Calum Polwart]

I have a Samsung SCX-4100 Multifunction Printer / Scanner which seems to 
be using sane following installation of the scanner using the samsung 
disks.  It is running on Fedora Core3, and I can scan using xsane.

I am trying to configure it to run on the network.  The server side 
(saned) seems to be up and running OK.  No problems reported in syslog 
and I can telnet to it on port 6566 and obtain a connection from local 
machine (192.168.1.50) and remote machine (192.168.1.100)

However I get an error message on the scanimage -L command from the 
remote machine (which relates to the second last line below) :'( .

I have enclosed the output of debug_net from the remote machine in the 
hope someone can suggest what needs fixed.  I hope to get this working 
on Win XP as well but figure its easier to stick with sane before trying 
to do sane and TWAIN ;-)

Hope someone knows the fix for this... Thanks

[polc1410@localhost ~]$ SANE_DEBUG_NET=128 scanimage -L
insmod: can't read 
'/lib/modules/2.6.11-1.27_FC3/kernel/drivers/mfpportctrl/mfpport.ko': No 
such file or directory
insmod: can't read 
'/lib/modules/2.6.11-1.27_FC3/kernel/drivers/mfpportctrl/mfpportprobe.ko': 
No such file or directory
insmod: can't read 
'/lib/modules/2.6.11-1.27_FC3/kernel/drivers/mfpportctrl/mfpport.ko': No 
such file or directory
insmod: can't read 
'/lib/modules/2.6.11-1.27_FC3/kernel/drivers/mfpportctrl/mfpportprobe.ko': 
No such file or directory
[sanei_debug] Setting debug level of net to 128.
[net] sane_init: authorize = 0x8049220, version_code = 0xbfff669c
[net] sane_init: SANE net backend version 1.0.13 (AF-indep+IPv6) from 
sane-backends 1.0.15
[net] sane_init: Client has little endian byte order
[net] sane_init: searching for config file
[net] sane_init: trying to add 192.168.1.50
[net] add_device: adding backend 192.168.1.50
[net] add_device: backend 192.168.1.50 added
[net] sane_init: done reading config
[net] sane_init: evaluating environment variable SANE_NET_HOSTS
[net] sane_init: done
[net] sane_get_devices: local_only = 0
[net] connect_dev: trying to connect to 192.168.1.50
[net] connect_dev: [0] connection succeeded (IPv4)
[net] connect_dev: sanei_w_init
[net] connect_dev: net_init (user=polc1410, local version=1.0.3)
[net] connect_dev: freeing init reply (status=Success, remote version=1.0.3)
[net] connect_dev: done
*[sanei_wire] sanei_w_array: DECODE: maximum amount of allocated memory 
exceeded (limit: 1048576, new allocation: 3180390528, total: 3181439104 
bytes)*
[net] sane_get_devices: ignoring rpc-returned status Unknown SANE status 
code 1768846189
Segmentation fault

-- 
------------------------------------------------------------------------
*Calum Polwart*
------------------------------------------------------------------------