[sane-devel] [sane-backends-1.0.16] Epson Perfection 1260 & OpenBSD 3.8-RELEASE

Manolis Tzanidakis manolis at tzanidakis.gr
Thu Nov 24 18:28:18 UTC 2005

Hello all,
I'm trying to setup my Epson Perfection 1260 with sane-backends-1.0.16
under OpenBSD-3.8-RELEASE (i386).
The scanner works on the same box on linux using a live cd.
I installed sane-backends using this port
& everything else from 3.8 ports.
I've disabled uscanner on kernel in order libusb to work:

$ sudo dmesg | grep ugen
ugen0 at uhub0 port 2
ugen0: EPSON EPSON Scanner, rev 1.10/1.00, addr 2

So here I go:

$ sudo sane-find-scanner -q

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

found USB scanner (vendor=0x04b8 [EPSON], product=0x011d [EPSON Scanner])
at libusb:/dev/usb0:/dev/ugen0

$ cat /etc/sane.d/dll.conf

$ grep -v "^#" /etc/sane.d/plustek.conf
[usb] 0x04b8 0x011d
device auto
option lampOff 300
option warmup -1
option lOffOnEnd 1
option posOffX 0
option posOffY 0
option tpaOffX 0
option tpaOffY 0
option negOffX 0
option negOffY 0
option posShadingY -1
option tpaShadingY -1
option negShadingY -1
option invertNegatives 0
option disableSpeedup 0
option cacheCalData 0
option altCalibration 0
option skipCalibration 0
option skipFine 0
option skipFineWhite 0
option red_gain   -1
option green_gain -1
option blue_gain  -1
option red_offset   -1
option green_offset -1
option blue_offset  -1
option red_lampoff   -1
option green_lampoff -1
option blue_lampoff  -1
option redGamma         1.0
option greenGamma       1.0
option blueGamma        1.0
option grayGamma        1.0
option enableTPA 0
option mov 0

$ sudo scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

Any help would be greatly appreciated.

Manolis Tzanidakis
manolis at tzanidakis.gr
mtzanidakis at gmail.com
jabber: mtzanidakis at jabber.org
icq: #102798230
Grab My GPG Public key from my homepage.

More information about the sane-devel mailing list