[sane-devel] Canoscan LiDE 25 detected by find-scanner,
not scanimage
Chris
sane at geekpages.co.uk
Fri Nov 25 19:10:03 UTC 2005
Hi Guys,
Thanks for the suggestions. I haven't got it working yet, but I think
the reason for the failure may be getting closer.
First I removed everything except plustek from the dll.conf file. As
expected the TV card was no longer picked up by scanimage but
unfortunately, neither was the CanoScan.
So I did the following as per Henning's suggestion:
export SANE_DEBUG_PLUSTEK=12
export SANE_DEBUG_DLL=12
export SANE_DEBUG_SANEI_USB=255
scanimage -L
The output was as follows:
[sanei_debug] Setting debug level of dll to 12.
[dll] sane_init: SANE dll backend version 1.0.11 from sane-backends1.0.16-cvs
[dll] sane_init: reading dll.conf
[dll] add_backend: adding backend `plustek'
[dll] sane_get_devices
[dll] load: searching backend `plustek' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-plustek.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-plustek.so.1'
[dll] init: initializing backend `plustek'
[sanei_debug] Setting debug level of plustek to 12.
[sanei_debug] Setting debug level of sanei_usb to 255.
[sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such file or
directory
[sanei_usb] sanei_usb_init: found 0 devices
[plustek] Plustek backend V0.50-7, part of sane-backends 1.0.16-cvs
[plustek] Retrieving all supported and conntected devices
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0010
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0011
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0015
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0013
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0013
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0011
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0010
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0015
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0016
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0007
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x000f
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x000f
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0005
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0012
[sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1000
[sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1001
[sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1001
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2007
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2008
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2009
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2013
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2015
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2016
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0505
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0605
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010f
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011d
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0050
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0060
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0160
[sanei_usb] sanei_usb_find_devices: vendor=0x049f, product=0x001a
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2206
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2207
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2208
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x220d
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x220e
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2220
[plustek] Available and supported devices:
[plustek] NONE.
[plustek] ># Plustek-SANE Backend configuration file<
[plustek] ># For use with LM9831/2/3 based USB scanners<
[plustek] >#<
[plustek] ><
[plustek] ># each device needs at least two lines:<
[plustek] ># - [usb] vendor-ID and product-ID<
[plustek] ># - device devicename<
[plustek] ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)<
[plustek] ># [usb] 0x07B3 0x0017<
[plustek] ># device /dev/usbscanner<
[plustek] ># or<
[plustek] ># device libusb:bbb:ddd<
[plustek] ># where bbb is the busnumber and ddd the device number<
[plustek] ># make sure that your user has access
to /proc/bus/usb/bbb/ddd<
[plustek] >#<
[plustek] ># additionally you can specify some options<
[plustek] ># warmup, lOffOnEnd, lampOff<
[plustek] >#<
[plustek] ># For autodetection use<
[plustek] ># [usb]<
[plustek] ># device /dev/usbscanner<
[plustek] >#<
[plustek] ># or simply<
[plustek] ># [usb]<
[plustek] >#<
[plustek] ># or if you want a specific device but you have no idea about
the<
[plustek] ># device node or you use libusb, simply set vendor- and
product-ID<
[plustek] ># [usb] 0x07B3 0x0017<
[plustek] ># device auto<
[plustek] >#<
[plustek] ># NOTE: autodetection is safe, as it uses the info it got<
[plustek] ># from the USB subsystem. If you're not using the<
[plustek] ># autodetection, you MUST have attached that device<
[plustek] ># at your USB-port, that you have specified...<
[plustek] >#<
[plustek] ><
[plustek] >[usb] 0x04a9 0x2220<
[plustek] next device is a USB device (0x04A9-0x2220)
[plustek] ... next device
[plustek] ><
<snip config stuff>
[plustek] Decoding device name >auto<
[plustek] ><
[plustek] >#<
[plustek] ># to define a new device, start with a new section:<
[plustek] ># [usb]<
[plustek] >#<
[plustek] attach (auto, 0xbff4f4fc, (nil))
[plustek] Device configuration:
[plustek] device name : >auto<
[plustek] USB-ID : >0x04A9-0x2220<
[plustek] model ovr. : 0
[plustek] warmup : -1s
[plustek] lampOff : 300
[plustek] lampOffOnEnd : yes
[plustek] cacheCalData : no
[plustek] altCalibrate : no
[plustek] skipCalibr. : no
[plustek] skipFine : no
[plustek] skipFineWhite: no
[plustek] invertNegs. : no
[plustek] dis.Speedup : no
[plustek] pos_x : 0
[plustek] pos_y : 0
[plustek] pos_shading_y: -1
[plustek] neg_x : 0
[plustek] neg_y : 0
[plustek] neg_shading_y: -1
[plustek] tpa_x : 0
[plustek] tpa_y : 0
[plustek] tpa_shading_y: -1
[plustek] red gain : -1
[plustek] green gain : -1
[plustek] blue gain : -1
[plustek] red offset : -1
[plustek] green offset : -1
[plustek] blue offset : -1
[plustek] red lampoff : -1
[plustek] green lampoff: -1
[plustek] blue lampoff : -1
[plustek] red Gamma : 1.00
[plustek] green Gamma : 1.00
[plustek] blue Gamma : 1.00
[plustek] gray Gamma : 1.00
[plustek] ---------------------
[plustek] usbDev_open(auto,0x04A9-0x2220) - (nil)
[sanei_usb] sanei_usb_open: trying to open device `auto'
[sanei_usb] sanei_usb_open: can't find device `auto' in list
[plustek] sanei_usb_open failed: No such file or directory (2)
[plustek] open failed: -1
[dll] init: backend `plustek' is version 1.0.0
[plustek] sane_get_devices (0xbff51648, 0)
[dll] sane_get_devices: found 0 devices
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `plustek's exit function
[plustek] sane_exit
[dll] sane_exit: finished
This bit struck me as strange:
sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such file or directory
[sanei_usb] sanei_usb_init: found 0 devices
Is that normal? Incase it's helpful, the output of lsusb is:
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 04a9:2220 Canon, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
So as far as I can tell the usb system knows the scanner is there ok.
Any ideas what's going on here?
Thanks again - you guys rock :-)
Chris
More information about the sane-devel
mailing list