[sane-devel] Pb with xsane-0.95

[francois baert]

Le Vendredi 25 Novembre 2005 18:32, Henning Meier-Geinitz a écrit :
> Hi,
>
> On Thu, Nov 24, 2005 at 05:42:05PM +0100, francois.baert wrote:
> > Up to now I have not managed to run xsane:
>
> What happens if you do so?
>
> > found USB scanner (vendor=0x04b8 [EPSON], product=0x0101 [Scanner
> > GT-7000]) at libusb:002:003
>
> Ok.
>
> > scanimage -L
> > device `epson:libusb:002:003' is a Epson GT-7000 flatbed scanner
>
> Ok. So your scanner is detected. What happens if you try to scan?
>
> > in the file /proc/bus/usb/devices I observe that Driver=none
> > How Do I have to proceed to load the right driver with the system file
> > usbfs.
>
> That's ok and normal. All devices with "none" can be accessed by usbfs.
>
> > In other words the command which replace /sbin/modprobe scanner
> > vendor=... product=...
>
> No replacement. Simply works. Otherwise you scanner would not have
> been detected at all.
>
> If you get any errors during scan, provide a log file
> export SANE_DEBUG_EPSON=255
>
> scanimage >image.pnm 2>logfile.txt
>
> Bye,
>   Henning
Hello
When I try to scan, at the beginning everything is o.k. but the scanner does 
not start and I have no thing on the screen, the program hangs for a while 
and the screen with "  Xsane  (c) Oliver Rauch , xsane 0.95 GT-7000:003 " 
becomes pale and then I got this message:
failure to start the scanner Error I/O on the peripherical.

Fortunately I have the version 0.89  which works with redhat 9.0 kernel 
2.4.20.

thanks
François