[sane-devel] SANE will not recognize scanner device
Wolfram Heider
wolframheider at web.de
Wed Oct 26 20:58:03 UTC 2005
Have a look in "/.../sane/sane-backends/plustek/Plustek-USB.txt". Don't know
where it resides in Fedora, maybe in /usr/doc/packages/.
Greetings
Wolfram Heider
Am Mittwoch, 26. Oktober 2005 22:01 schrieb Thuis:
> Hello there,
>
> I have an Canoscan LIDE30, support in backend x.x.16. I use Fedora 4 as
> operating system and installed the SANE package from RPM.
> SANE will recognize the usb-device as a scanner but won't make a device for
> it. I get a "[plustek] sanei_access_lock failed: 11" please tell me how to
> avoid this and getting the scanner working.
>
> The following output I get from scanimage -T :
> ---------------------------------------------------------------------------
>----------------------------------------------------------------------------
>--- [sanei_debug] Setting debug level of dll to 12.
> [dll] sane_init: SANE dll backend version 1.0.11 from sane-backends 1.0.16
> [dll] sane_init: reading dll.conf
> [dll] add_backend: adding backend `plustek'
> [dll] sane_get_devices
> [dll] load: searching backend `plustek' in `/usr/lib/sane'
> [dll] load: trying to load `/usr/lib/sane/libsane-plustek.so.1'
> [dll] load: dlopen()ing `/usr/lib/sane/libsane-plustek.so.1'
> [dll] init: initializing backend `plustek'
> [sanei_debug] Setting debug level of plustek to 12.
> [sanei_debug] Setting debug level of sanei_usb to 128.
> [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such file or directory
> usb_set_debug: Setting debugging level to 255 (on)
> usb_os_find_busses: Found 006
> usb_os_find_busses: Found 005
> usb_os_find_busses: Found 004
> usb_os_find_busses: Found 003
> usb_os_find_busses: Found 002
> usb_os_find_busses: Found 001
> usb_os_find_busses: Skipping non bus directory devices
> usb_os_find_devices: Found 001 on 006
> usb_os_find_devices: Found 003 on 005
> usb_os_find_devices: Found 001 on 005
> error obtaining child information: Inappropriate ioctl for device
> usb_os_find_devices: Found 001 on 004
> usb_os_find_devices: Found 001 on 003
> usb_os_find_devices: Found 001 on 002
> usb_os_find_devices: Found 001 on 001
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub
> [sanei_usb] sanei_usb_init: found libusb device (0x04a9/0x220e) interface 0
> at libusb:005:003
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub
> [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub
> [sanei_usb] sanei_usb_init: found 1 devices
> [plustek] Plustek backend V0.49-7, part of sane-backends 1.0.16
> [plustek] Retrieving all supported and conntected devices
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0010
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0011
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0015
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0013
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0013
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0011
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0010
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0015
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0016
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0007
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x000f
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x000f
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0005
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014
> [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0012
> [sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1000
> [sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1001
> [sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1001
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2007
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2008
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2009
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2013
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2015
> [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2016
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0505
> [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0605
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010f
> [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011d
> [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0050
> [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0060
> [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0160
> [sanei_usb] sanei_usb_find_devices: vendor=0x049f, product=0x001a
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2206
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2207
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2208
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x220d
> [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x220e
> [plustek] Available and supported devices:
> [plustek] Device: >libusb:005:003< - 0x04a9x0x220e
> [plustek] ># Plustek-SANE Backend configuration file<
> [plustek] ># For use with LM9831/2/3 based USB scanners<
> [plustek] >#<
> [plustek] ><
> [plustek] ># each device needs at least two lines:<
> [plustek] ># - [usb] vendor-ID and product-ID<
> [plustek] ># - device devicename<
> [plustek] ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)<
> [plustek] ># [usb] 0x07B3 0x0017<
> [plustek] ># device /dev/usb/scanner0<
> [plustek] ># or<
> [plustek] ># device libusb:bbb:ddd<
> [plustek] ># where bbb is the busnumber and ddd the device number<
> [plustek] ># make sure that your user has access to /proc/bus/usb/bbb/ddd<
> [plustek] >#<
> [plustek] ># additionally you can specify some options<
> [plustek] ># warmup, lOffOnEnd, lampOff<
> [plustek] >#<
> [plustek] ># For autodetection use<
> [plustek] ># [usb]<
> [plustek] ># device /dev/usb/scanner0<
> [plustek] >#<
> [plustek] ># or simply<
> [plustek] ># [usb]<
> [plustek] >#<
> [plustek] ># or if you want a specific device but you have no idea about
> the< [plustek] ># device node or you use libusb, simply set vendor- and
> product-ID< [plustek] ># [usb] 0x07B3 0x0017<
> [plustek] ># device auto<
> [plustek] >#<
> [plustek] ># NOTE: autodetection is safe, as it uses the info it got<
> [plustek] ># from the USB subsystem. If you're not using the<
> [plustek] ># autodetection, you MUST have attached that device<
> [plustek] ># at your USB-port, that you have specified...<
> [plustek] >#<
> [plustek] ><
> [plustek] >[usb] 0x04a9 0x220e<
> [plustek] next device is a USB device (0x04A9-0x220E)
> [plustek] ... next device
> [plustek] ><
> [plustek] >device libusb:005:003<
> [plustek] Decoding device name >libusb:005:003<
> [plustek] >#device auto<
> [plustek] ><
> [plustek] >#[usb]<
> [plustek] ><
> [plustek] >#<
> [plustek] ># options for the previous USB entry<
> [plustek] >#<
> [plustek] ># switch lamp off after xxx secs, 0 disables the feature<
> [plustek] ># (can also be set via frontend)<
> [plustek] >#option lampOff 300<
> [plustek] ><
> [plustek] ># warmup period in seconds, 0 means no warmup, -1 means
> auto-warmup<
> [plustek] ># (can also be set via frontend)<
> [plustek] >#option warmup -1<
> [plustek] ><
> [plustek] ># 0 means leave lamp-status untouched, not 0 means switch off<
> [plustek] ># on sane_close<
> [plustek] ># (can also be set via frontend)<
> [plustek] >#option lOffOnEnd 1<
> [plustek] ><
> [plustek] >#<
> [plustek] ># options to tweak the image start-position<
> [plustek] ># (WARNING: there's no internal range check!!!)<
> [plustek] >#<
> [plustek] ># for the normal scan area<
> [plustek] >#<
> [plustek] >#option posOffX 0<
> [plustek] >#option posOffY 0<
> [plustek] ><
> [plustek] ># for transparencies<
> [plustek] >#option tpaOffX 0<
> [plustek] >#option tpaOffY 0<
> [plustek] ><
> [plustek] ># for negatives<
> [plustek] >#option negOffX 0<
> [plustek] >#option negOffY 0<
> [plustek] ><
> [plustek] >#<
> [plustek] ># for setting the calibration strip position<
> [plustek] ># (WARNING: there's no internal range check!!!)<
> [plustek] ># -1 means use built in<
> [plustek] ># (can also be set via frontend)<
> [plustek] >#option posShadingY -1<
> [plustek] >#option tpaShadingY -1<
> [plustek] >#option negShadingY -1<
> [plustek] ><
> [plustek] >#<
> [plustek] ># to invert the negatives, 0 disables the feature<
> [plustek] >#<
> [plustek] >#option invertNegatives 0<
> [plustek] ><
> [plustek] >#<
> [plustek] ># to disable the internal sensor speedup function,<
> [plustek] ># 1 disables the feature<
> [plustek] >#<
> [plustek] >#option disableSpeedup 0<
> [plustek] ><
> [plustek] >#<
> [plustek] ># to save/restore coarse calibration data<
> [plustek] ># (can also be set via frontend)<
> [plustek] >#option cacheCalData 0<
> [plustek] ><
> [plustek] >#<
> [plustek] ># use alternate calibration routines<
> [plustek] >#<
> [plustek] >#option altCalibration 0<
> [plustek] ><
> [plustek] >#<
> [plustek] ># for skipping whole calibration step<
> [plustek] >#<
> [plustek] >#option skipCalibration 0<
> [plustek] ><
> [plustek] >#<
> [plustek] ># for skipping entire fine calibration step<
> [plustek] ># coarse calibration is done<
> [plustek] >#<
> [plustek] >#option skipFine 0<
> [plustek] ><
> [plustek] >#<
> [plustek] ># discard the result of the fine white calibration<
> [plustek] >#<
> [plustek] >#option skipFineWhite 0<
> [plustek] ><
> [plustek] ># for replacing the gain values found during coarse<
> [plustek] ># calibration<
> [plustek] ># (can also be set via frontend)<
> [plustek] >#option red_gain -1<
> [plustek] >#option green_gain -1<
> [plustek] >#option blue_gain -1<
> [plustek] ><
> [plustek] ># for replacing the offset values found during coarse<
> [plustek] ># calibration<
> [plustek] ># (can also be set via frontend)<
> [plustek] >#option red_offset -1<
> [plustek] >#option green_offset -1<
> [plustek] >#option blue_offset -1<
> [plustek] ><
> [plustek] >#<
> [plustek] ># for replacing the default lampoff settings, this<
> [plustek] ># works only for CIS devices like CanoScan LiDE20<
> [plustek] ># (can also be set via frontend)<
> [plustek] >#option red_lampoff -1<
> [plustek] >#option green_lampoff -1<
> [plustek] >#option blue_lampoff -1<
> [plustek] ><
> [plustek] >#<
> [plustek] ># for adjusting the default gamma values<
> [plustek] ># (can also be set via frontend)<
> [plustek] >#option redGamma 1.0<
> [plustek] >#option greenGamma 1.0<
> [plustek] >#option blueGamma 1.0<
> [plustek] >#option grayGamma 1.0<
> [plustek] ><
> [plustek] >#<
> [plustek] ># to enable TPA (EPSON or UMAX, if autodetection fails)<
> [plustek] ># 0 means default behaviour as specified in the internal tables<
> [plustek] ># 1 means enable (needed for UMAX 3450)<
> [plustek] >#option enableTPA 0<
> [plustek] ><
> [plustek] >#<
> [plustek] ># model override functionality, currently only available for<
> [plustek] ># Mustek devices, using NSCs' vendor ID: 0x0400 and<
> [plustek] ># also their product ID: 0x1000 (LM9831) 0x1001 (LM9832)<
> [plustek] >#<
> [plustek] ># mov/PID | 0x1000 | 0x1001<
> [plustek] ># ---------------------------------------<
> [plustek] ># 0 (default)| BearPaw1200 | BearPaw 2400<
> [plustek] ># 1 | ignored | BearPaw 1200<
> [plustek] >#<
> [plustek] >#option mov 0<
> [plustek] ><
> [plustek] >#<
> [plustek] ># and of course the device-name<
> [plustek] >#<
> [plustek] ># device /dev/usb/scanner0<
> [plustek] ># device auto<
> [plustek] ><
> [plustek] >#<
> [plustek] ># to define a new device, start with a new section:<
> [plustek] ># [usb]<
> [plustek] >#<
> [plustek] attach (libusb:005:003, 0xbfac2d98, (nil))
> [plustek] Device configuration:
> [plustek] device name : >libusb:005:003<
> [plustek] USB-ID : >0x04A9-0x220E<
> [plustek] model ovr. : 0
> [plustek] warmup : -1s
> [plustek] lampOff : -1
> [plustek] lampOffOnEnd : yes
> [plustek] cacheCalData : no
> [plustek] altCalibrate : no
> [plustek] skipCalibr. : no
> [plustek] skipFine : no
> [plustek] skipFineWhite: no
> [plustek] invertNegs. : no
> [plustek] dis.Speedup : no
> [plustek] pos_x : 0
> [plustek] pos_y : 0
> [plustek] pos_shading_y: -1
> [plustek] neg_x : 0
> [plustek] neg_y : 0
> [plustek] neg_shading_y: -1
> [plustek] tpa_x : 0
> [plustek] tpa_y : 0
> [plustek] tpa_shading_y: -1
> [plustek] red gain : -1
> [plustek] green gain : -1
> [plustek] blue gain : -1
> [plustek] red offset : -1
> [plustek] green offset : -1
> [plustek] blue offset : -1
> [plustek] red lampoff : -1
> [plustek] green lampoff: -1
> [plustek] blue lampoff : -1
> [plustek] red Gamma : 1.00
> [plustek] green Gamma : 1.00
> [plustek] blue Gamma : 1.00
> [plustek] gray Gamma : 1.00
> [plustek] ---------------------
> [plustek] usbDev_open(libusb:005:003,0x04A9-0x220E) - 0x9075770
> [plustek] sanei_access_lock failed: 11
> [plustek] open failed: -1
> [dll] init: backend `plustek' is version 1.0.0
> [plustek] sane_get_devices (0xbfac4ee8, 0)
> [dll] sane_get_devices: found 0 devices
> scanimage: no SANE devices found
> [dll] sane_exit: exiting
> [dll] sane_exit: calling backend `plustek's exit function
> [plustek] sane_exit
> [dll] sane_exit: finished
> ---------------------------------------------------------------------------
>----------------------------------------------------------------------------
>---
>
> Please help
>
> Greetings Geert Jan
More information about the sane-devel
mailing list