[sane-devel] macosx/darwin -- canoscan lide25 -- partial success
Shouri Chatterjee
shouri at gmail.com
Thu Sep 29 13:45:13 UTC 2005
Hi,
I am trying to get my canoscan lide25 scanner (it seems to be
supported through the SANE plustek backend) on mac os x.
sane-find-scanner detects the scanner. Included below is the log for
sane-find-scanner -v -v.
However, the bad news: scanimage -L fails to list the scanner -- I am
including the log for that as well.
I don't think I missed out on anything obvious - but please advise if
that is the case.
Regards,
-Shouri
-------------------
[diode:~] sane-find-scanner -v -v
This is sane-find-scanner from sane-backends 1.0.16-cvs
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
searching for SCSI scanners:
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a SCSI driver for your SCSI adapter.
searching for USB scanners:
trying libusb:
<device descriptor of 0x05ac/0x8005 at 001:001-05ac-8005-09-00 (Apple
Computer, Inc. OHCI Root Hub Simulation)>
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x05AC
idProduct 0x8005
bcdDevice 1.90
iManufacturer 2 (Apple Computer, Inc.)
iProduct 1 (OHCI Root Hub Simulation)
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 10
bDescriptorType 2
wTotalLength 27
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 96 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 1
iInterface 0 ()
<endpoint 0>
bLength 8
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 255 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x05ac/0x8005 at 002:001-05ac-8005-09-00 (Apple
Computer, Inc. OHCI Root Hub Simulation)>
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x05AC
idProduct 0x8005
bcdDevice 1.90
iManufacturer 2 (Apple Computer, Inc.)
iProduct 1 (OHCI Root Hub Simulation)
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 10
bDescriptorType 2
wTotalLength 27
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 96 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 1
iInterface 0 ()
<endpoint 0>
bLength 8
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 255 ms
bRefresh 0
bSynchAddress 0
<device descriptor of 0x04a9/0x2220 at 002:002-04a9-2220-ff-00 (Canon CanoScan)>
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255
bDeviceSubClass 0
bDeviceProtocol 255
bMaxPacketSize0 8
idVendor 0x04A9
idProduct 0x2220
bcdDevice 1.00
iManufacturer 1 (Canon)
iProduct 2 (CanoScan)
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 160 (Remote Wakeup)
MaxPower 500 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 0
bInterfaceProtocol 255
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 16 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 (out 0x03)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bDeviceSubClass = 0x0)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GT-8911 ...
this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bcdUSB = 0x110)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceSubClass = 0x0)
checking for LM983[1,2,3] ...
Couldn't set configuration: usb_set_configuration(SetConfiguration):
device not opened for exclusive access
<This USB chip looks like a LM983x?>
found USB scanner (vendor=0x04a9 [Canon], product=0x2220 [CanoScan],
chip=LM983x?) at libusb:002:002-04a9-2220-ff-00
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
done
------------------
[diode:~] setenv SANE_DEBUG_SANEI_USB 4
[diode:~] setenv SANE_DEBUG_PLUSTEK 10
[diode:~] scanimage -L
[sanei_debug] Setting debug level of plustek to 10.
[sanei_debug] Setting debug level of sanei_usb to 4.
[sanei_usb] sanei_usb_init: found libusb device (0x04a9/0x2220)
interface 0 at libusb:002:002-04a9-2220-ff-00
[plustek] Plustek backend V0.50-3, part of sane-backends 1.0.16-cvs
[plustek] Retrieving all supported and conntected devices
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0010
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0011
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0015
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0013
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0013
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0011
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0010
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0015
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0016
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0007
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x000f
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x000f
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0005
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014
[sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0012
[sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1000
[sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1001
[sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1001
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2007
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2008
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2009
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2013
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2015
[sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2016
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0505
[sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0605
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010f
[sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011d
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0050
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0060
[sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0160
[sanei_usb] sanei_usb_find_devices: vendor=0x049f, product=0x001a
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2206
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2207
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2208
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x220d
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x220e
[sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2220
[plustek] Available and supported devices:
[plustek] Device: >libusb:002:002-04a9-2220-ff-00< - 0x04a9x0x2220
[plustek] >[usb] 0x04A9 0x2220<
[plustek] next device is a USB device (0x04A9-0x2220)
[plustek] ... next device
[plustek] >device libusb:002:002<
[plustek] Decoding device name >libusb:002:002<
[plustek] attach (libusb:002:002, 0xbffff060, 0x0)
[plustek] Device configuration:
[plustek] device name : >libusb:002:002<
[plustek] USB-ID : >0x04A9-0x2220<
[plustek] model ovr. : 0
[plustek] warmup : -1s
[plustek] lampOff : -1
[plustek] lampOffOnEnd : yes
[plustek] cacheCalData : no
[plustek] altCalibrate : no
[plustek] skipCalibr. : no
[plustek] skipFine : no
[plustek] skipFineWhite: no
[plustek] invertNegs. : no
[plustek] dis.Speedup : no
[plustek] pos_x : 0
[plustek] pos_y : 0
[plustek] pos_shading_y: -1
[plustek] neg_x : 0
[plustek] neg_y : 0
[plustek] neg_shading_y: -1
[plustek] tpa_x : 0
[plustek] tpa_y : 0
[plustek] tpa_shading_y: -1
[plustek] red gain : -1
[plustek] green gain : -1
[plustek] blue gain : -1
[plustek] red offset : -1
[plustek] green offset : -1
[plustek] blue offset : -1
[plustek] red lampoff : -1
[plustek] green lampoff: -1
[plustek] blue lampoff : -1
[plustek] red Gamma : 1.00
[plustek] green Gamma : 1.00
[plustek] blue Gamma : 1.00
[plustek] gray Gamma : 1.00
[plustek] ---------------------
[plustek] usbDev_open(libusb:002:002,0x04A9-0x2220) - 0x300980
[sanei_usb] sanei_usb_open: libusb complained:
usb_set_configuration(SetConfiguration): device not opened for
exclusive access
[plustek] sanei_usb_open failed: No such file or directory (2)
[plustek] open failed: -1
[plustek] sane_get_devices (0xbffff5f0, 0)
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[plustek] sane_exit
More information about the sane-devel
mailing list