[sane-devel] Samsung SCX-4200 MFP and sane

[Gerard Klaver]

On Mon, 2006-08-14 at 23:00 +0200, Torben Bertram wrote:
> Hi! I searched the database, but nothing helped me.
> So I will ask you for help. 
> 
> http://oa.samsung.de/article.asp?artid=3C6280D5-8701-434A-A664-A28CB5131A74&show=feats
> 
> My new Samsung SCX-4200 MFP works well, only the
> scanning function isn't working. The included
> driver (tested by Samsung on SuSE) makes the
> printer running for my KUBUNTU 6.06, the driver is
> in /etc/sane.d/samsung_scx4200.dll.conf included. 
> 
> lsusb says:
> ....
> Bus 003 Device 003: ID 04e8:341b Samsung
> Electronics Co., Ltd
> ....
> 
> sane-find-scanner says:
> found USB scanner (vendor=0x04e8, product=0x341b)
> at libusb:003:003           and
> found USB scanner (vendor=0x057c, product=0x5601)
> at libusb:003:002
> 
> The last one is my WLAN device from AVM, Fritz USB
> Stick, not really a scanner.
> 
> Kooka crashes everytime sending the signal 11.
> Xsane can't find a scanner. Samsung MPF driver
> program can't find a scanner either. I use the SANE
> version 1.0.14-1 and a Linux 2.6.15-26-386. 
> 
> Maybe it is only a small thing I miss..... But
> what? This time any searches in forums doesn't
> helped. Thankfully looking for your advice -
>  Torben from Germany.
> 
> Torben Bertram
> Carl-Severing-Str. 3
> D-28329 Bremen
> Telefon +49(0)421 2443047
> 
Check with ls -l /proc/bus/usb/003/003 the permissions (for hotplug
setup)
Check with ls -l /dev/bus/usb/003/003 the permissions (for udev setup)
See also www.sane-project.org/LINUX.readme file

If permissions not ok, check if your scanner is added to the
libsane.rules file.
-- 
--------
m.vr.gr.
Gerard Klaver