[sane-devel] "USB HP scanjet 4070 photo smart scanner" not working on Fedora3

[gangaraju]

Hi,

	I have installed Fedora3(Linux-2.6.9),Kooka,xsane-0.92.
I got a USB HP scanjet 4070 photo smart scanner recently.

After hotplug my HP scanjet 4070 scanner ,i typed xsane on my
terminal,it is showing a window with message "No Devices avilable".

And more i ddn't get any new entry /dev. (like sdg.../dev/scanner).
But my lsusb out as:

Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 03f0:2405 Hewlett-Packard
Bus 001 Device 001: ID 0000:0000

And /proc/bus/usb/devices has entry:

Bus=01 Lev=01 Prnt=01 Port=06 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=03f0 ProdID=2405 Rev= 1.00
S: Manufacturer=hewlett packard
S: Product=hp scanjet
S: SerialNumber=CN52SAL262RW
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=256ms

/var/log/messages out put as...

Dec 3 18:47:32 localhost kernel: usb 1-7: USB disconnect, address 2
Dec 3 18:48:51 localhost kernel: usb 1-7: new high speed USB device
using address 3
Dec 3 18:50:01 localhost crond(pam_unix)[3797]: session opened for user
root by (uid=0)
Dec 3 18:50:01 localhost crond(pam_unix)[3800]: session opened for user
root by (uid=0)
Dec 3 18:50:01 localhost crond(pam_unix)[3797]: session closed for user
root
Dec 3 18:50:01 localhost crond(pam_unix)[3800]: session closed for user
root
Dec 3 18:51:57 localhost kernel: ppdev: user-space parallel port driver
Dec 3 18:52:02 localhost wait_for_sysfs[3825]: either wait_for_sysfs
(udev 039) needs an update to handle the device '/clas
s/ppdev/parport0' properly (no device symlink) or the sysfs-support of
your device's driver needs to be fixed, please report
to <linux-hotplug-devel at lists.sourceforge.net>



]#sane-find-scanner out put is.....
No SCSI scanners found. If you expected something different, make
sure that
you have loaded a SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x03f0 [hewlett packard], product=0x2405 [hp
scanjet]) at libusb:003:003
Your USB scanner was (probably) detected. It may or may not be
supported by
SANE. Try scanimage -L and read the backend's manpage.

Not checking for parallel port scanners.

Most Scanners connected to the parallel port or other proprietary ports
can't be detected by this program.

You may want to run this program as root to find all devices. Once you
found the scanner devices, be sure to adjust access permissions as
necessary.


And

]# scanimage -L gives out put as ..
No SCSI scanners found. If you expected something different, make sure
that
you have loaded a SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x03f0 [hewlett packard], product=0x2405 [hp
scanjet]) at libusb:003:003
Your USB scanner was (probably) detected. It may or may not be
supported by
SANE. Try scanimage -L and read the backend's manpage.

Not checking for parallel port scanners.

Most Scanners connected to the parallel port or other proprietary ports
can't be detected by this program.

You may want to run this program as root to find all devices. Once you
found the scanner devices, be sure to adjust access permissions as
necessary.

Don't my machine has supported drivers???
please help me to get work with my scanner.

-- 
Regards,
Gangaraju.Chowki
Software Engineer,
HOST Technologies Ltd.