[sane-devel] RE: help with Canon 650U
Gerhard Jaeger
gerhard at gjaeger.de
Fri Mar 3 07:00:52 UTC 2006
Well in general I'd say this is related to the locking feature,
but as you're using sane-backends-1.0.15 (did you?)
Then this feature is not available.
No more ideas on that - sorry
Gerhard
On Thursday 02 March 2006 17:25, void at chatcircuit.com wrote:
> Hi,
>
> /dev/usbscanner might be fine, but useless here, when using the libusb,
> the backend tries to access the device via procfs.
> Is the usbfs mounted?
> Make sure to have somethink like
> usbfs /proc/bus/usb usbfs noauto 0 0
> somewhere in /etc/fstab
>
> Then you should also check the procfs entries, i.e:
> sane-find-scanner reports something like:
> found USB scanner (vendor=0x04a9 [Canon], product=0x220d [CanoScan],
> chip=LM9832/3) at libusb:003:002
>
> Then
> cat /proc/bus/usb/devices should contain (amongst other stuff):
> T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=04a9 ProdID=220d Rev= 1.00
> S: Manufacturer=Canon
> S: Product=CanoScan
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
> E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=16ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>
> Also /proc/bus/usb/003/002 should exist.
> If that is true, at least it should be possible to let scanimage -L
> work as root.
>
> HTH
> Gerhard
>
> usbfs is mounted, procfs is mounted. I already did "cat /proc/bus/usb/device" it
> looks just like that. a tad different, but yeah, I don't understand why it isn't
> working. I'll give you proof of this on tuesday.
>
> Josh
> P.S. I haven't tried kicking it, perhaps I should tonight.
>
More information about the sane-devel
mailing list