[sane-devel] Problem with HP ScanJet 8290 and scsi

[Marc F. Clemente]

I have additional information that may be useful.  I connected a Nikon
LS-2000 (also scsi) to the same scsi cable.  I do not have the same
problem with the LS-2000.

Disabling calibration and gamma-table in avision.conf makes no difference.

I reproduce the error with the avision debug info.  Maybe it will help.
 Let me know what else I can do.

Marc

[avision] set_calib_data:
[avision] set_calib_data: channels in single commands
[avision] set_calib_data_calibration: channel: 0
[avision] set_calib_data: sending 3408 bytes now
[sanei_scsi] scsi_req_enter: entered 0x2aaaab703010
[sanei_scsi] sanei_scsi.issue: 0x2aaaab703010
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x2aaaab703010
[sanei_scsi] sanei_scsi.issue: 0x2aaaab703010
[sanei_scsi] sanei_scsi_req_wait: read 88 bytes
[avision] set_calib_data_calibration: channel: 1
[avision] set_calib_data: sending 3408 bytes now
[sanei_scsi] scsi_req_enter: entered 0x2aaaab703010
[sanei_scsi] sanei_scsi.issue: 0x2aaaab703010
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x2aaaab703010
[sanei_scsi] sanei_scsi.issue: 0x2aaaab703010
[sanei_scsi] sanei_scsi_req_wait: read 88 bytes
[avision] set_calib_data_calibration: channel: 2
[avision] set_calib_data: sending 3408 bytes now
[sanei_scsi] scsi_req_enter: entered 0x2aaaab703010
[sanei_scsi] sanei_scsi.issue: 0x2aaaab703010
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x2aaaab703010
[sanei_scsi] sanei_scsi.issue: 0x2aaaab703010
[sanei_scsi] sanei_scsi_req_wait: read 88 bytes
[avision] send_3x3_matrix:
[avision] send_3x3_matrix: sending matrix
[sanei_scsi] sanei_scsi_req_enter2 warning: truncating write data from
requested 28 bytes to allowed 12 bytes
[sanei_scsi] scsi_req_enter: entered 0x2aaaab703010
[sanei_scsi] sanei_scsi.issue: 0x2aaaab703010
[sanei_scsi] sanei_scsi.issue: bad write (errno=90) Message too long -1
[sanei_scsi] sanei_scsi_req_wait: waiting for 0x2aaaab703010
[sanei_scsi] sanei_scsi.issue: 0x2aaaab703010
scanimage: sane_start: Error during device I/O
[avision] sane_cancel:
[avision] sane_close:

[avision] sane_exit:
Exit 9