[sane-devel] re: Minolta Dimage Scan Dual II
Dietmar Segbert
didi.segbert at arcor.de
Tue May 23 19:47:00 UTC 2006
Hello Rene and Jose,
hello list,
now i have tested the following commands:
scanimage -d avision >test.pnm 2>error.asc
(door was closed an no film holder)
scanimage -d avision --frame 1 --resolution 2820 >bild.pnm 2>error1.asc
(doo was half open, film holder with three negatives)
But nothing happened, also not without the resolution-option.
Here are the error.asc and error1.asc
Regards
Dietmar
[sanei_debug] Setting debug level of avision to 7.
[avision] sane_init:(Version: 1.0 Build: 200)
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 1: ignoring empty line
[avision] sane_init: parsing config line "# This are the possible options. Normally any scanner"
[avision] sane_init: config file line 2: ignoring comment line
[avision] sane_init: parsing config line "# should work just fine without them - and they are only"
[avision] sane_init: config file line 3: ignoring comment line
[avision] sane_init: parsing config line "# needed for test and debugging. So if you experience problems"
[avision] sane_init: config file line 4: ignoring comment line
[avision] sane_init: parsing config line "# and you solve them with enabling options here, please notify"
[avision] sane_init: config file line 5: ignoring comment line
[avision] sane_init: parsing config line "# the SANE/Avision maintainer: Rene Rebe <rene at exactcode.de>"
[avision] sane_init: config file line 6: ignoring comment line
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 7: ignoring empty line
[avision] sane_init: parsing config line "#option disable-gamma-table"
[avision] sane_init: config file line 8: ignoring comment line
[avision] sane_init: parsing config line "#option disable-calibration"
[avision] sane_init: config file line 9: ignoring comment line
[avision] sane_init: parsing config line "#option force-a4"
[avision] sane_init: config file line 10: ignoring comment line
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 11: ignoring empty line
[avision] sane_init: parsing config line "scsi AVISION"
[avision] sane_init: config file line 12: trying to attach SCSI: scsi AVISION'
[avision] sane_init: parsing config line "#scsi FCPA"
[avision] sane_init: config file line 13: ignoring comment line
[avision] sane_init: parsing config line "scsi MINOLTA"
[avision] sane_init: config file line 14: trying to attach SCSI: scsi MINOLTA'
[avision] sane_init: parsing config line "#scsi MITSBISH MCA-S600C"
[avision] sane_init: config file line 15: ignoring comment line
[avision] sane_init: parsing config line "#scsi MITSBISH MCA-SS600"
[avision] sane_init: config file line 16: ignoring comment line
[avision] sane_init: parsing config line "#scsi HP"
[avision] sane_init: config file line 17: ignoring comment line
[avision] sane_init: parsing config line "#scsi hp"
[avision] sane_init: config file line 18: ignoring comment line
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 19: ignoring empty line
[avision] sane_init: parsing config line "#scsi /dev/sg5"
[avision] sane_init: config file line 20: ignoring comment line
[avision] sane_init: parsing config line "# usb libusb:002:003"
[avision] sane_init: config file line 21: ignoring comment line
[avision] sane_init: parsing config line "# usb 0x03f0 0x0701"
[avision] sane_init: config file line 22: ignoring comment line
[avision] sane_init: parsing config line "usb 0x0638 0x026a"
[avision] sane_init: config file line 23: trying to attach USB:`usb 0x0638 0x026a'
[avision] attach:
[avision] attach: opening libusb:004:004
[avision] inquiry: 96
[avision] attach: sending INQUIRY
[avision] filling command to have a length of 10, was: 6
[avision] Timeouts: write: 30000, read: 1500, status: 1500
[avision] avision_usb_status: timeout 1500, 1 retries
[avision] ==> (bulk read) going down ...
[avision] <== (bulk read) got: 0, status: 0
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] attach: Inquiry gives mfg=MINOLTA, model=FS-V1, product revision=1.26.
[avision] attach: Found model: 55
[avision] inquiry: 96
[avision] attach: sending INQUIRY
[avision] filling command to have a length of 10, was: 6
[avision] Timeouts: write: 30000, read: 1500, status: 1500
[avision] avision_usb_status: timeout 1500, 1 retries
[avision] ==> (bulk read) going down ...
[avision] <== (bulk read) got: 0, status: 0
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] attach: raw data:
[avision] [0] 00000110b 6o 6d 6x
[avision] [1] 10000000b 200o 128d 80x
[avision] [2] 00000010b 2o 2d 2x
[avision] [3] 01000010b 102o 66d 42x
[avision] [4] 01011011b 133o 91d 5bx
[avision] [5] 00000000b 0o 0d 0x
[avision] [6] 00000000b 0o 0d 0x
[avision] [7] 00000000b 0o 0d 0x
[avision] [8] 01001101b 115o 77d 4dx
[avision] [9] 01001001b 111o 73d 49x
[avision] [10] 01001110b 116o 78d 4ex
[avision] [11] 01001111b 117o 79d 4fx
[avision] [12] 01001100b 114o 76d 4cx
[avision] [13] 01010100b 124o 84d 54x
[avision] [14] 01000001b 101o 65d 41x
[avision] [15] 00100000b 40o 32d 20x
[avision] [16] 01000110b 106o 70d 46x
[avision] [17] 01010011b 123o 83d 53x
[avision] [18] 00101101b 55o 45d 2dx
[avision] [19] 01010110b 126o 86d 56x
[avision] [20] 00110001b 61o 49d 31x
[avision] [21] 00100000b 40o 32d 20x
[avision] [22] 00100000b 40o 32d 20x
[avision] [23] 00100000b 40o 32d 20x
[avision] [24] 00100000b 40o 32d 20x
[avision] [25] 00100000b 40o 32d 20x
[avision] [26] 00100000b 40o 32d 20x
[avision] [27] 00100000b 40o 32d 20x
[avision] [28] 00100000b 40o 32d 20x
[avision] [29] 00100000b 40o 32d 20x
[avision] [30] 00100000b 40o 32d 20x
[avision] [31] 00100000b 40o 32d 20x
[avision] [32] 00110001b 61o 49d 31x
[avision] [33] 00101110b 56o 46d 2ex
[avision] [34] 00110010b 62o 50d 32x
[avision] [35] 00110110b 66o 54d 36x
[avision] [36] 10100000b 240o 160d a0x
[avision] [37] 00000011b 3o 3d 3x
[avision] [38] 00000110b 6o 6d 6x
[avision] [39] 11100111b 347o 231d e7x
[avision] [40] 00001011b 13o 11d bx
[avision] [41] 00000100b 4o 4d 4x
[avision] [42] 00001011b 13o 11d bx
[avision] [43] 00000100b 4o 4d 4x
[avision] [44] 00001011b 13o 11d bx
[avision] [45] 00000100b 4o 4d 4x
[avision] [46] 00001011b 13o 11d bx
[avision] [47] 00000100b 4o 4d 4x
[avision] [48] 00000000b 0o 0d 0x
[avision] [49] 00000000b 0o 0d 0x
[avision] [50] 11011001b 331o 217d d9x
[avision] [51] 10010100b 224o 148d 94x
[avision] [52] 11111010b 372o 250d fax
[avision] [53] 00001000b 10o 8d 8x
[avision] [54] 00000100b 4o 4d 4x
[avision] [55] 00000100b 4o 4d 4x
[avision] [56] 00000010b 2o 2d 2x
[avision] [57] 00001000b 10o 8d 8x
[avision] [58] 00001000b 10o 8d 8x
[avision] [59] 00001000b 10o 8d 8x
[avision] [60] 11000000b 300o 192d c0x
[avision] [61] 11010000b 320o 208d d0x
[avision] [62] 10101000b 250o 168d a8x
[avision] [63] 00000101b 5o 5d 5x
[avision] [64] 00000001b 1o 1d 1x
[avision] [65] 00000001b 1o 1d 1x
[avision] [66] 00000010b 2o 2d 2x
[avision] [67] 00000011b 3o 3d 3x
[avision] [68] 00000100b 4o 4d 4x
[avision] [69] 00000101b 5o 5d 5x
[avision] [70] 00000000b 0o 0d 0x
[avision] [71] 00000000b 0o 0d 0x
[avision] [72] 00000000b 0o 0d 0x
[avision] [73] 00000000b 0o 0d 0x
[avision] [74] 00000000b 0o 0d 0x
[avision] [75] 00001111b 17o 15d fx
[avision] [76] 11111111b 377o 255d ffx
[avision] [77] 00000000b 0o 0d 0x
[avision] [78] 00000000b 0o 0d 0x
[avision] [79] 00000000b 0o 0d 0x
[avision] [80] 00000000b 0o 0d 0x
[avision] [81] 00001010b 12o 10d ax
[avision] [82] 10000000b 200o 128d 80x
[avision] [83] 00001111b 17o 15d fx
[avision] [84] 11000000b 300o 192d c0x
[avision] [85] 00001010b 12o 10d ax
[avision] [86] 10000000b 200o 128d 80x
[avision] [87] 00001111b 17o 15d fx
[avision] [88] 11000000b 300o 192d c0x
[avision] [89] 00001011b 13o 11d bx
[avision] [90] 00000100b 4o 4d 4x
[avision] [91] 00000011b 3o 3d 3x
[avision] [92] 00000000b 0o 0d 0x
[avision] [93] 00100000b 40o 32d 20x
[avision] [94] 00000000b 0o 0d 0x
[avision] [95] 00000000b 0o 0d 0x
[avision] attach: [8-15] Vendor id.: "MINOLTA "
[avision] attach: [16-31] Product id.: "FS-V1 "
[avision] attach: [32-35] Product rev.: "1.26"
[avision] attach: [36] Bitfield: ADF 3-pass color RGB color plane
[avision] attach: [37] Optical res.: 300 dpi
[avision] attach: [38] Maximum res.: 600 dpi
[avision] attach: [39] Bitfield1: TRANS Q_SCAN EXTENDED_RES NEW_PROTOCOL AVISION
[avision] attach: [40-41] X res. in gray: 2820 dpi
[avision] attach: [42-43] Y res. in gray: 2820 dpi
[avision] attach: [44-45] X res. in color: 2820 dpi
[avision] attach: [46-47] Y res. in color: 2820 dpi
[avision] attach: [48-49] USB max read: 0
[avision] attach: [50] ESA1: LIGHT_CONTROL BUTTON_CONTROL SW_CALIB NEED_SW_GAMMA XYRES_DIFFERENT
[avision] attach: [51] ESA2: EXPOSURE_CTRL SUPPORTS_QUALITY_SPEED_CAL HAS_PUSH_BUTTON
[avision] attach: [52] ESA3: GRAY_WHITE SUPPORTS_GAIN_CONTROL SUPPORTS_TET 3x3COL_TABLE 1x3FILTER POWER_SAVING_TIMER
[avision] attach: [53] line difference (software color pack): 8
[avision] attach: [54] color mode pixel boundary: 4
[avision] attach: [55] gray mode pixel boundary: 4
[avision] attach: [56] 4bit gray mode pixel boundary: 2
[avision] attach: [57] lineart mode pixel boundary: 8
[avision] attach: [58] halftone mode pixel boundary: 8
[avision] attach: [59] error-diffusion mode pixel boundary: 8
[avision] attach: [60] channels per pixel: 1 3
[avision] attach: [61] bits per channel: 1 4 8
[avision] attach: [62] scanner type: Flatbed Flatbed (ADF) Film scanner
[avision] attach: [75-76] Max shading target : fff
[avision] attach: [77-78] Max X of transparency: 0 dots * base_dpi
[avision] attach: [79-80] Max Y of transparency: 0 dots * base_dpi
[avision] attach: [81-82] Max X of flatbed: 2688 dots * base_dpi
[avision] attach: [83-84] Max Y of flatbed: 4032 dots * base_dpi
[avision] attach: [85-86] Max X of ADF: 2688 dots * base_dpi
[avision] attach: [87-88] Max Y of ADF: 4032 dots * base_dpi
[avision] attach: [89-90] Res. in Ex. mode: 2820 dpi
[avision] attach: [91] ASIC: 3
[avision] attach: [92] Buttons: 0
[avision] attach: [93] ESA4: NO_SINGLE_CHANNEL_GRAY_MODE
[avision] attach: [94] ESA5:
[avision] attach: [95] ESA6:
[avision] attach: optical resolution set to: 2820 dpi
[avision] attach: max resolution set to: 2820 dpi
[avision] attach: max channels per pixel: 3, max bits per channel: 8
[avision] attach: x/y-range for mode 0 is valid!
[avision] attach: Mode 0 range is now: 24.311064 x 36.316596 mm.
[avision] attach: x/y-range for mode 1 is invalid! Using a default.
[avision] attach: Mode 1 range is now: 215.900000 x 299.720000 mm.
[avision] attach: x/y-range for mode 2 is valid!
[avision] attach: Mode 2 range is now: 24.311064 x 36.316596 mm.
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 24: ignoring empty line
[avision] sane_init: Trying to find USB device 638 a27 ...
[avision] sane_init: Trying to find USB device 638 a3c ...
[avision] sane_init: Trying to find USB device 638 a33 ...
[avision] sane_init: Trying to find USB device 638 a24 ...
[avision] sane_init: Trying to find USB device 638 a25 ...
[avision] sane_init: Trying to find USB device 638 a3a ...
[avision] sane_init: Trying to find USB device 638 a23 ...
[avision] sane_init: Trying to find USB device 638 a2a ...
[avision] sane_init: Trying to find USB device 638 a2a ...
[avision] sane_init: Trying to find USB device 638 a19 ...
[avision] sane_init: Trying to find USB device 638 a41 ...
[avision] sane_init: Trying to find USB device 638 a16 ...
[avision] sane_init: Trying to find USB device 638 a13 ...
[avision] sane_init: Trying to find USB device 638 a18 ...
[avision] sane_init: Trying to find USB device 638 a66 ...
[avision] sane_init: Trying to find USB device 638 a40 ...
[avision] sane_init: Trying to find USB device 638 a68 ...
[avision] sane_init: Trying to find USB device 638 a61 ...
[avision] sane_init: Trying to find USB device 638 a45 ...
[avision] sane_init: Trying to find USB device 3f0 701 ...
[avision] sane_init: Trying to find USB device 3f0 701 ...
[avision] sane_init: Trying to find USB device 3f0 801 ...
[avision] sane_init: Trying to find USB device 3f0 b01 ...
[avision] sane_init: Trying to find USB device 638 26a ...
[avision] attach:
[avision] sane_init: Trying to find USB device 686 4004 ...
[avision] sane_init: Trying to find USB device 686 400d ...
[avision] sane_init: Trying to find USB device 686 400e ...
[avision] sane_init: Trying to find USB device 638 a15 ...
[avision] sane_init: Trying to find USB device 638 a16 ...
[avision] sane_init: Trying to find USB device 4c5 1029 ...
[avision] sane_init: Trying to find USB device 40a 6001 ...
[avision] sane_init: Trying to find USB device 40a 6002 ...
[avision] sane_init: Trying to find USB device 40a 6003 ...
[avision] sane_init: Trying to find USB device 40a 6004 ...
[avision] sane_init: Trying to find USB device 40a 6005 ...
[avision] sane_init: Trying to find USB device 638 268 ...
[avision] sane_init: Trying to find USB device 4a7 449 ...
[avision] sane_init: Trying to find USB device 4a7 44c ...
[avision] sane_init: Trying to find USB device 4a7 475 ...
[avision] sane_open:
[avision] sane_open: using open_extended
[avision] sane_open: got 1048576 scsi_max_request_size
[avision] inquiry: 96
[avision] attach: sending INQUIRY
[avision] filling command to have a length of 10, was: 6
[avision] Timeouts: write: 30000, read: 1500, status: 1500
[avision] avision_usb_status: timeout 1500, 1 retries
[avision] ==> (bulk read) going down ...
[avision] <== (bulk read) got: 0, status: 0
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] wait_ready: sending TEST_UNIT_READY
[avision] filling command to have a length of 10, was: 6
[avision] Timeouts: write: 30000, read: 1500, status: 1500
[avision] avision_usb_status: timeout 1500, 1 retries
[avision] ==> (bulk read) going down ...
[avision] <== (bulk read) got: 0, status: 0
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] get_frame_info:
[avision] Timeouts: write: 30000, read: 30000, status: 10000
[avision] avision_usb_status: timeout 10000, 1 retries
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] get_frame_info: raw data
[avision] [0] 11111111b 377o 255d ffx
[avision] [1] 10000000b 200o 128d 80x
[avision] [2] 00000010b 2o 2d 2x
[avision] [3] 01000010b 102o 66d 42x
[avision] [4] 01011011b 133o 91d 5bx
[avision] [5] 00000000b 0o 0d 0x
[avision] [6] 00000000b 0o 0d 0x
[avision] [7] 00000000b 0o 0d 0x
[avision] get_frame_info: [0] Holder type: Empty
[avision] get_frame_info: [1] Current frame number: 128
[avision] get_frame_info: [2] Frame ammount: 2
[avision] get_frame_info: [3] Mode: Not APS
[avision] get_frame_info: [3] Exposures (if APS): Unknown
[avision] get_frame_info: [3] Film Type (if APS): B&W Negative
[avision] add_color_mode: 0 Lineart
[avision] add_color_mode: 1 Dithered
[avision] add_color_mode: 2 Gray
[avision] add_color_mode: 5 Color
[avision] init_options:
[avision] init_options: dpi_range.min set to 100
[avision] max_string_size:
[avision] match_color_mode:
[avision] match_color_mode: found at 3 mode: 5
[avision] max_string_size:
[avision] match_source_mode: "Normal"
[avision] match_source_mode: found at 0 mode: 0
[avision] match_source_mode_dim: 0
[avision] sane_control_option: option=0, action=0
[avision] sane_control_option: option=0, action=0
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_control_option: option=10, action=0
[avision] sane_get_option_descriptor:
[avision] sane_control_option: option=11, action=0
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_get_option_descriptor:
[avision] sane_control_option: option=8, action=0
[avision] sane_control_option: option=9, action=0
[avision] sane_control_option: option=8, action=0
[avision] sane_get_option_descriptor:
[avision] sane_control_option: option=10, action=1
[avision] constrain_value:
[avision] sane_control_option: option=9, action=0
[avision] sane_get_option_descriptor:
[avision] sane_control_option: option=11, action=1
[avision] constrain_value:
[avision] sane_start:
[avision] sane_get_parameters:
[avision] sane_get_parameters: computing parameters
[avision] sane_compute_parameters:
[avision] sane_compute_parameters: boundary 4, gray_mode: 1,
[avision] sane_compute_parameters: tlx: 0.000000, tly: 0.000000, brx: 24.000000, bry: 36.000000
[avision] sane_compute_parameters: tlx: 0, tly: 0, brx: 141, bry: 212
[avision] sane_compute_parameters: xres: 150, yres: 150, line_difference: 0
[avision] sane_compute_parameters: pixel_per_line: 140, lines: 212
[avision] sane_compute_parameters: depth: 8, bytes_per_line: 420
[avision] sane_compute_parameters:
[avision] sane_compute_parameters: boundary 4, gray_mode: 1,
[avision] sane_compute_parameters: tlx: 0.000000, tly: 0.000000, brx: 24.000000, bry: 36.000000
[avision] sane_compute_parameters: tlx: 0, tly: 0, brx: 141, bry: 212
[avision] sane_compute_parameters: xres: 150, yres: 150, line_difference: 0
[avision] sane_compute_parameters: pixel_per_line: 140, lines: 212
[avision] sane_compute_parameters: depth: 8, bytes_per_line: 420
[avision] wait_4_light: getting light status.
[avision] wait_4_light: read bytes 1
[avision] Timeouts: write: 30000, read: 30000, status: 10000
[avision] avision_usb_status: timeout 10000, 1 retries
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] wait_4_light: command is 0. Result is off
[avision] wait_4_light: setting light status.
[avision] Timeouts: write: 30000, read: 30000, status: 10000
[avision] avision_usb_status: timeout 10000, 1 retries
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] wait_4_light: read bytes 1
[avision] Timeouts: write: 30000, read: 30000, status: 10000
[avision] avision_usb_status: timeout 10000, 1 retries
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] wait_4_light: command is 0. Result is off
[avision] wait_4_light: setting light status.
[avision] Timeouts: write: 30000, read: 30000, status: 10000
[avision] avision_usb_status: timeout 10000, 1 retries
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] wait_4_light: read bytes 1
[avision] Timeouts: write: 30000, read: 30000, status: 10000
[avision] avision_usb_status: timeout 10000, 1 retries
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] wait_4_light: command is 0. Result is off
[avision] wait_4_light: setting light status.
[avision] Timeouts: write: 30000, read: 30000, status: 10000
[avision] avision_usb_status: timeout 10000, 1 retries
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] wait_4_light: read bytes 1
[avision] Timeouts: write: 30000, read: 30000, status: 10000
[avision] avision_usb_status: timeout 10000, 1 retries
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] wait_4_light: command is 0. Result is off
[avision] wait_4_light: setting light status.
[avision] Timeouts: write: 30000, read: 30000, status: 10000
[avision] avision_usb_status: timeout 10000, 1 retries
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] wait_4_light: read bytes 1
[avision] Timeouts: write: 30000, read: 30000, status: 10000
[avision] avision_usb_status: timeout 10000, 1 retries
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] wait_4_light: command is 0. Result is on
[avision] set_window:
[avision] set_window: base_dpi_abs: 1200, base_dpi_rel: 1200
[avision] set_window: base paralen: 7
[avision] set_window: final paralen: 20
[avision] set_window: transferlen: 70
[avision] set_window: large data-transfer support (>16bit)!
[avision] set_window: source mode 0 source mode dim 0
[avision] window_data_header:
[avision] [0] 00000000b 0o 0d 0x
[avision] [1] 00000000b 0o 0d 0x
[avision] [2] 00000000b 0o 0d 0x
[avision] [3] 00000000b 0o 0d 0x
[avision] [4] 00000000b 0o 0d 0x
[avision] [5] 00000000b 0o 0d 0x
[avision] [6] 00000000b 0o 0d 0x
[avision] [7] 00111110b 76o 62d 3ex
[avision] window_descriptor:
[avision] [0] 00000000b 0o 0d 0x
[avision] [1] 00000000b 0o 0d 0x
[avision] [2] 00000000b 0o 0d 0x
[avision] [3] 10010110b 226o 150d 96x
[avision] [4] 00000000b 0o 0d 0x
[avision] [5] 10010110b 226o 150d 96x
[avision] [6] 00000000b 0o 0d 0x
[avision] [7] 00000000b 0o 0d 0x
[avision] [8] 00000000b 0o 0d 0x
[avision] [9] 00000000b 0o 0d 0x
[avision] [10] 00000000b 0o 0d 0x
[avision] [11] 00000000b 0o 0d 0x
[avision] [12] 00000000b 0o 0d 0x
[avision] [13] 00000000b 0o 0d 0x
[avision] [14] 00000000b 0o 0d 0x
[avision] [15] 00000000b 0o 0d 0x
[avision] [16] 00000100b 4o 4d 4x
[avision] [17] 01100001b 141o 97d 61x
[avision] [18] 00000000b 0o 0d 0x
[avision] [19] 00000000b 0o 0d 0x
[avision] [20] 00000110b 6o 6d 6x
[avision] [21] 10100001b 241o 161d a1x
[avision] [22] 10000000b 200o 128d 80x
[avision] [23] 10000000b 200o 128d 80x
[avision] [24] 10000000b 200o 128d 80x
[avision] [25] 00000101b 5o 5d 5x
[avision] [26] 00001000b 10o 8d 8x
[avision] [27] 00000000b 0o 0d 0x
[avision] [28] 00000000b 0o 0d 0x
[avision] [29] 00000011b 3o 3d 3x
[avision] [30] 00000000b 0o 0d 0x
[avision] [31] 00000000b 0o 0d 0x
[avision] [32] 00000000b 0o 0d 0x
[avision] [33] 00000000b 0o 0d 0x
[avision] [34] 00000000b 0o 0d 0x
[avision] [35] 10100000b 240o 160d a0x
[avision] [36] 00000000b 0o 0d 0x
[avision] [37] 00000000b 0o 0d 0x
[avision] [38] 00000000b 0o 0d 0x
[avision] [39] 00000000b 0o 0d 0x
[avision] [40] 11111111b 377o 255d ffx
[avision] [41] 00010100b 24o 20d 14x
[avision] [42] 01100000b 140o 96d 60x
[avision] [43] 11111111b 377o 255d ffx
[avision] [44] 00000000b 0o 0d 0x
[avision] [45] 00000001b 1o 1d 1x
[avision] [46] 10100100b 244o 164d a4x
[avision] [47] 00000000b 0o 0d 0x
[avision] [48] 11010100b 324o 212d d4x
[avision] [49] 00010000b 20o 16d 10x
[avision] [50] 00000000b 0o 0d 0x
[avision] [51] 00000001b 1o 1d 1x
[avision] [52] 01101101b 155o 109d 6dx
[avision] [53] 00000001b 1o 1d 1x
[avision] [54] 01101101b 155o 109d 6dx
[avision] [55] 00000001b 1o 1d 1x
[avision] [56] 01101101b 155o 109d 6dx
[avision] [57] 00000000b 0o 0d 0x
[avision] [58] 00000000b 0o 0d 0x
[avision] [59] 00000000b 0o 0d 0x
[avision] [60] 00000000b 0o 0d 0x
[avision] [61] 00000000b 0o 0d 0x
[avision] [62] 00000000b 0o 0d 0x
[avision] [63] 00000000b 0o 0d 0x
[avision] set_window: [0] window_id: 0
[avision] set_window: [2-3] x-axis res: 150
[avision] set_window: [4-5] y-axis res: 150
[avision] set_window: [6-9] x-axis upper left: 0
[avision] set_window: [10-13] y-axis upper left: 0
[avision] set_window: [14-17] window width: 1121
[avision] set_window: [18-21] window length: 1697
[avision] set_window: [22] brightness: 128
[avision] set_window: [23] threshold: 128
[avision] set_window: [24] contrast: 128
[avision] set_window: [25] image composition: 5
[avision] set_window: [26] bits per channel: 8
[avision] set_window: [27-28] halftone pattern: 0
[avision] set_window: [29] padding_and_bitset: 3
[avision] set_window: [30-31] bit ordering: 0
[avision] set_window: [32] compression type: 0
[avision] set_window: [33] compression argument: 0
[avision] set_window: [34-35] paper length: a0
[avision] set_window: [40] vendor id: ff
[avision] set_window: [41] param lenght: 20
[avision] set_window: [42] bitset1: 60
[avision] set_window: [43] highlight: 255
[avision] set_window: [44] shadow: 0
[avision] set_window: [45-46] line-width: 420
[avision] set_window: [47-48] line-count: 212
[avision] set_window: [49] bitset2: 10
[avision] set_window: [50] ir exposure time: 0
[avision] set_window: [51-52] r exposure: 16d
[avision] set_window: [53-54] g exposure: 16d
[avision] set_window: [55-56] b exposure: 16d
[avision] set_window: [57] bitset3: 0
[avision] set_window: [58] auto focus: 0
[avision] set_window: [59] line-width (MSB): 0
[avision] set_window: [60] line-count (MSB): 0
[avision] set_window: [61] edge threshold: 0
[avision] set_window: sending command. Bytes: 70
[avision] Timeouts: write: 30000, read: 30000, status: 10000
[avision] avision_usb_status: timeout 10000, 1 retries
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] normal_calibration:
[avision] get_calib_format:
[avision] get_calib_format: read_data: 32 bytes
[avision] Timeouts: write: 30000, read: 30000, status: 10000
[avision] avision_usb_status: timeout 10000, 1 retries
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] debug_print_calib_format:
[avision] [0] 00001010b 12o 10d ax
[avision] [1] 11010010b 322o 210d d2x
[avision] [2] 00000001b 1o 1d 1x
[avision] [3] 01011010b 132o 90d 5ax
[avision] [4] 00000001b 1o 1d 1x
[avision] [5] 00011111b 37o 31d 1fx
[avision] [6] 00000000b 0o 0d 0x
[avision] [7] 00000000b 0o 0d 0x
[avision] [8] 00000000b 0o 0d 0x
[avision] [9] 00000000b 0o 0d 0x
[avision] [10] 11111111b 377o 255d ffx
[avision] [11] 00000000b 0o 0d 0x
[avision] [12] 11111111b 377o 255d ffx
[avision] [13] 00000000b 0o 0d 0x
[avision] [14] 11111111b 377o 255d ffx
[avision] [15] 00000000b 0o 0d 0x
[avision] [16] 00000000b 0o 0d 0x
[avision] [17] 00000000b 0o 0d 0x
[avision] [18] 00000000b 0o 0d 0x
[avision] [19] 00000000b 0o 0d 0x
[avision] [20] 00000000b 0o 0d 0x
[avision] [21] 00000000b 0o 0d 0x
[avision] [22] 00000000b 0o 0d 0x
[avision] [23] 00000000b 0o 0d 0x
[avision] [24] 00000000b 0o 0d 0x
[avision] [25] 00000000b 0o 0d 0x
[avision] [26] 00000000b 0o 0d 0x
[avision] [27] 00000000b 0o 0d 0x
[avision] [28] 00000000b 0o 0d 0x
[avision] [29] 00000000b 0o 0d 0x
[avision] [30] 00000000b 0o 0d 0x
[avision] [31] 00000000b 0o 0d 0x
[avision] get_calib_format: [0-1] pixels per line: 2770
[avision] get_calib_format: [2] bytes per channel: 1
[avision] get_calib_format: [3] line count: 90
[avision] get_calib_format: [4] FLAG: MUST_DO_CALIBRATION
[avision] get_calib_format: [5] Ability1: PACKED PACKED_DATA COLOR_CALIB DARK_CALIB NEEDS_WHITE_BLACK_SHADING_DATA NEEDS_CALIB_TABLE_CHANNEL_BY_CHANNEL
[avision] get_calib_format: [6] R gain: 0
[avision] get_calib_format: [7] G gain: 0
[avision] get_calib_format: [8] B gain: 0
[avision] get_calib_format: [9-10] R shading target: ff
[avision] get_calib_format: [11-12] G shading target: ff
[avision] get_calib_format: [13-14] B shading target: ff
[avision] get_calib_format: [15-16] R dark shading target: 0
[avision] get_calib_format: [17-18] G dark shading target: 0
[avision] get_calib_format: [19-20] B dark shading target: 0
[avision] get_calib_format: channels: 3
[avision] normal_calibration: reading dark data
[avision] get_calib_data: type 66, size 249300, chunk_size: 249300
[avision] get_calib_data: Reading 249300 bytes calibration data
[avision] Timeouts: write: 30000, read: 30000, status: 10000
[avision] avision_usb_status: timeout 10000, 1 retries
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] get_calib_data: Got 249300 bytes calibration data
[avision] sort_and_average:
[avision] compute_dark_shading_data:
[avision] normal_calibration: using color calibration
[avision] get_calib_data: type 62, size 249300, chunk_size: 249300
[avision] get_calib_data: Reading 249300 bytes calibration data
[avision] Timeouts: write: 30000, read: 30000, status: 10000
[avision] avision_usb_status: timeout 10000, 1 retries
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 0
[avision] get_calib_data: Got 249300 bytes calibration data
[avision] sort_and_average:
[avision] normal_calibration: dark data present - decreasing white aerage data
[avision] compute_white_shading_data:
[avision] compute_white_shading_data: target 0: bytes swapped.
[avision] compute_white_shading_data: target 0: ff00
[avision] compute_white_shading_data: target 1: bytes swapped.
[avision] compute_white_shading_data: target 1: ff00
[avision] compute_white_shading_data: target 2: bytes swapped.
[avision] compute_white_shading_data: target 2: ff00
[avision] compute_white_shading_data: 97 invalid, 23 limitted
[avision] set_calib_data:
[avision] set_calib_data: merging dark calibration data
[avision] set_calib_data: channels in single commands
[avision] set_calib_data_calibration: channel: 0
[avision] set_calib_data: sending 5540 bytes now
[avision] Timeouts: write: 30000, read: 30000, status: 10000
[avision] === Got error 9 trying to write, wrote: 0. ===
[avision] try to read status to clear the FIFO
[avision] avision_usb_status: timeout 500, 1 retries
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 1, status: 2
[avision] avision_usb_status: Needs to request sense!
[avision] === Got error 4 trying to read status. ===
[avision] set_calib_data: send_data failed (Error during device I/O)
[avision] set_calib_data_calibration: channel: 1
[avision] set_calib_data: sending 5540 bytes now
[avision] Timeouts: write: 30000, read: 30000, status: 10000
scanimage: received signal 2
scanimage: trying to stop scanner
[avision] sane_cancel:
[avision] === Got error 9 trying to write, wrote: 0. ===
[avision] try to read status to clear the FIFO
[avision] avision_usb_status: timeout 500, 1 retries
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 0, status: 0
[avision] === Got error 9 trying to read status. ===
[avision] set_calib_data: send_data failed (Error during device I/O)
[avision] set_calib_data_calibration: channel: 2
[avision] set_calib_data: sending 5540 bytes now
[avision] Timeouts: write: 30000, read: 30000, status: 10000
scanimage: received signal 2
scanimage: aborting
Here ist error1.asc
[sanei_debug] Setting debug level of avision to 7.
[avision] sane_init:(Version: 1.0 Build: 200)
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 1: ignoring empty line
[avision] sane_init: parsing config line "# This are the possible options. Normally any scanner"
[avision] sane_init: config file line 2: ignoring comment line
[avision] sane_init: parsing config line "# should work just fine without them - and they are only"
[avision] sane_init: config file line 3: ignoring comment line
[avision] sane_init: parsing config line "# needed for test and debugging. So if you experience problems"
[avision] sane_init: config file line 4: ignoring comment line
[avision] sane_init: parsing config line "# and you solve them with enabling options here, please notify"
[avision] sane_init: config file line 5: ignoring comment line
[avision] sane_init: parsing config line "# the SANE/Avision maintainer: Rene Rebe <rene at exactcode.de>"
[avision] sane_init: config file line 6: ignoring comment line
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 7: ignoring empty line
[avision] sane_init: parsing config line "#option disable-gamma-table"
[avision] sane_init: config file line 8: ignoring comment line
[avision] sane_init: parsing config line "#option disable-calibration"
[avision] sane_init: config file line 9: ignoring comment line
[avision] sane_init: parsing config line "#option force-a4"
[avision] sane_init: config file line 10: ignoring comment line
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 11: ignoring empty line
[avision] sane_init: parsing config line "scsi AVISION"
[avision] sane_init: config file line 12: trying to attach SCSI: scsi AVISION'
[avision] sane_init: parsing config line "#scsi FCPA"
[avision] sane_init: config file line 13: ignoring comment line
[avision] sane_init: parsing config line "scsi MINOLTA"
[avision] sane_init: config file line 14: trying to attach SCSI: scsi MINOLTA'
[avision] sane_init: parsing config line "#scsi MITSBISH MCA-S600C"
[avision] sane_init: config file line 15: ignoring comment line
[avision] sane_init: parsing config line "#scsi MITSBISH MCA-SS600"
[avision] sane_init: config file line 16: ignoring comment line
[avision] sane_init: parsing config line "#scsi HP"
[avision] sane_init: config file line 17: ignoring comment line
[avision] sane_init: parsing config line "#scsi hp"
[avision] sane_init: config file line 18: ignoring comment line
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 19: ignoring empty line
[avision] sane_init: parsing config line "#scsi /dev/sg5"
[avision] sane_init: config file line 20: ignoring comment line
[avision] sane_init: parsing config line "# usb libusb:002:003"
[avision] sane_init: config file line 21: ignoring comment line
[avision] sane_init: parsing config line "# usb 0x03f0 0x0701"
[avision] sane_init: config file line 22: ignoring comment line
[avision] sane_init: parsing config line "usb 0x0638 0x026a"
[avision] sane_init: config file line 23: trying to attach USB:`usb 0x0638 0x026a'
[avision] attach:
[avision] attach: opening libusb:004:004
[avision] inquiry: 96
[avision] attach: sending INQUIRY
[avision] filling command to have a length of 10, was: 6
[avision] Timeouts: write: 30000, read: 1500, status: 1500
[avision] === Got error 9 trying to write, wrote: 0. ===
[avision] try to read status to clear the FIFO
[avision] avision_usb_status: timeout 500, 1 retries
[avision] ==> (bulk read) going down ...
[avision] <== (bulk read) got: 0, status: 0
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 0, status: 0
[avision] === Got error 9 trying to read status. ===
[avision] inquiry: inquiry failed (Error during device I/O)
[avision] filling command to have a length of 10, was: 6
[avision] Timeouts: write: 30000, read: 1500, status: 1500
[avision] === Got error 9 trying to write, wrote: 0. ===
[avision] try to read status to clear the FIFO
[avision] avision_usb_status: timeout 500, 1 retries
[avision] ==> (bulk read) going down ...
[avision] <== (bulk read) got: 0, status: 0
[avision] ==> (interrupt read) going down ...
[avision] <== (interrupt read) got: 0, status: 0
[avision] === Got error 5 trying to read status. ===
[avision] inquiry: inquiry failed (Error during device I/O)
[avision] attach: 1st inquiry failed (Error during device I/O)
[avision] sane_init: parsing config line ""
[avision] sane_init: config file line 24: ignoring empty line
[avision] sane_init: Trying to find USB device 638 a27 ...
[avision] sane_init: Trying to find USB device 638 a3c ...
[avision] sane_init: Trying to find USB device 638 a33 ...
[avision] sane_init: Trying to find USB device 638 a24 ...
[avision] sane_init: Trying to find USB device 638 a25 ...
[avision] sane_init: Trying to find USB device 638 a3a ...
[avision] sane_init: Trying to find USB device 638 a23 ...
[avision] sane_init: Trying to find USB device 638 a2a ...
[avision] sane_init: Trying to find USB device 638 a2a ...
[avision] sane_init: Trying to find USB device 638 a19 ...
[avision] sane_init: Trying to find USB device 638 a41 ...
[avision] sane_init: Trying to find USB device 638 a16 ...
[avision] sane_init: Trying to find USB device 638 a13 ...
[avision] sane_init: Trying to find USB device 638 a18 ...
[avision] sane_init: Trying to find USB device 638 a66 ...
[avision] sane_init: Trying to find USB device 638 a40 ...
[avision] sane_init: Trying to find USB device 638 a68 ...
[avision] sane_init: Trying to find USB device 638 a61 ...
[avision] sane_init: Trying to find USB device 638 a45 ...
[avision] sane_init: Trying to find USB device 3f0 701 ...
[avision] sane_init: Trying to find USB device 3f0 701 ...
[avision] sane_init: Trying to find USB device 3f0 801 ...
[avision] sane_init: Trying to find USB device 3f0 b01 ...
[avision] sane_init: Trying to find USB device 638 26a ...
[avision] attach:
[avision] attach: opening libusb:004:004
[avision] attach: open failed (Invalid argument)
[avision] sane_init: Trying to find USB device 686 4004 ...
[avision] sane_init: Trying to find USB device 686 400d ...
[avision] sane_init: Trying to find USB device 686 400e ...
[avision] sane_init: Trying to find USB device 638 a15 ...
[avision] sane_init: Trying to find USB device 638 a16 ...
[avision] sane_init: Trying to find USB device 4c5 1029 ...
[avision] sane_init: Trying to find USB device 40a 6001 ...
[avision] sane_init: Trying to find USB device 40a 6002 ...
[avision] sane_init: Trying to find USB device 40a 6003 ...
[avision] sane_init: Trying to find USB device 40a 6004 ...
[avision] sane_init: Trying to find USB device 40a 6005 ...
[avision] sane_init: Trying to find USB device 638 268 ...
[avision] sane_init: Trying to find USB device 4a7 449 ...
[avision] sane_init: Trying to find USB device 4a7 44c ...
[avision] sane_init: Trying to find USB device 4a7 475 ...
[avision] sane_open:
scanimage: open of device avision failed: Invalid argument
[avision] sane_exit:
More information about the sane-devel
mailing list