[sane-devel] Re: Scanjet 4370 'sudo lsusb -vv'?

Huub huubvanniekerk at gmail.com
Wed Sep 6 10:00:07 UTC 2006


Dean Loros wrote:
> Can you post the output of 'sudo lsusb -vv'?
> 
> 
> Bus 007 Device 003: ID 03f0:4105 Hewlett-Packard
> Device Descriptor:
>  bLength                18
>  bDescriptorType         1
>  bcdUSB               2.00
>  bDeviceClass            0 (Defined at Interface level)
>  bDeviceSubClass         0
>  bDeviceProtocol         0
>  bMaxPacketSize0        64
>  idVendor           0x03f0 Hewlett-Packard
>  idProduct          0x4105
>  bcdDevice            1.00
>  iManufacturer           1 hewlett packard
>  iProduct                2 hp scanjet
>  iSerial                 3 CN63PA24Z204CM
>  bNumConfigurations      1
>  Configuration Descriptor:
>    bLength                 9
>    bDescriptorType         2
>    wTotalLength           39
>    bNumInterfaces          1
>    bConfigurationValue     1
>    iConfiguration          4 USB SCANNER
>    bmAttributes         0xe0
>      Self Powered
>      Remote Wakeup
>    MaxPower                2mA
>    Interface Descriptor:
>      bLength                 9
>      bDescriptorType         4
>      bInterfaceNumber        0
>      bAlternateSetting       0
>      bNumEndpoints           3
>      bInterfaceClass       255 Vendor Specific Class
>      bInterfaceSubClass      0
>      bInterfaceProtocol    255
>      iInterface              5 Bulk-In, Bulk-Out, Interrupt Interface
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x81  EP 1 IN
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0200  1x 512 bytes
>        bInterval               0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x02  EP 2 OUT
>        bmAttributes            2
>          Transfer Type            Bulk
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0200  1x 512 bytes
>        bInterval               0
>      Endpoint Descriptor:
>        bLength                 7
>        bDescriptorType         5
>        bEndpointAddress     0x83  EP 3 IN
>        bmAttributes            3
>          Transfer Type            Interrupt
>          Synch Type               None
>          Usage Type               Data
>        wMaxPacketSize     0x0001  1x 1 bytes
>        bInterval              12
> Device Qualifier (for other device speed):
>  bLength                10
>  bDescriptorType         6
>  bcdUSB               2.00
>  bDeviceClass            0 (Defined at Interface level)
>  bDeviceSubClass         0
>  bDeviceProtocol         0
>  bMaxPacketSize0        64
>  bNumConfigurations      1
> Device Status:     0x0001
>  Self Powered
> 
> 

Thank you Dean. No idea why it doesn show up in my -vv. Maybe my scanner 
is broken. It won't install on Windows2000 either, gives unknown device.




More information about the sane-devel mailing list