[sane-devel] Formulardaten
stef
stef.dev at free.fr
Wed Dec 19 20:21:38 UTC 2007
Le Wednesday 19 December 2007 13:42:25 cgi-mailer at kundenserver.de, vous avez
écrit :
> ===========================================
> == Neuer Eintrag
> ===========================================
>
>
> -------------------------------------------
> -- Formular: 'adddev'
> -------------------------------------------
>
> 1. Your email address:
> 'hoffmann_jens at web.de'
> 2. Manufacturer (e.g. "Mustek"):
> 'Hewlet Packard'
> 3. Model name (e.g. ScanExpress 1200UB):
> 'hp scanjet 4400c USB'
> 4. Bus type:
> 'USB'
> 5. Vendor id (e.g. 0x001):
> ''
> 6. Product id (e.g. 0x0002):
> ''
> 7. Chipset (e.g. lm9831):
> ''
> 8. Comments (e.g. similar to Mustek 1234):
> 'hp scanjet 4400c
> similar to Realtek RTS8891 ??????
> '
> 9. Data (e.g. sane-find-scanner -v -v):
> 'This is sane-find-scanner from sane-backends 1.0.18-cvs
>
> # sane-find-scanner will now attempt to detect your scanner. If the
> # result is different from what you expected, first make sure your
> # scanner is powered up and properly connected to your computer.
>
> searching for SCSI scanners:
> checking /dev/scanner... failed to open (Invalid argument)
> checking /dev/sg0... failed to open (Access to resource has been denied)
> checking /dev/sg1... failed to open (Invalid argument)
> checking /dev/sg2... failed to open (Invalid argument)
> checking /dev/sg3... failed to open (Invalid argument)
> checking /dev/sg4... failed to open (Invalid argument)
> checking /dev/sg5... failed to open (Invalid argument)
> checking /dev/sg6... failed to open (Invalid argument)
> checking /dev/sg7... failed to open (Invalid argument)
> checking /dev/sg8... failed to open (Invalid argument)
> checking /dev/sg9... failed to open (Invalid argument)
> checking /dev/sga... failed to open (Invalid argument)
> checking /dev/sgb... failed to open (Invalid argument)
> checking /dev/sgc... failed to open (Invalid argument)
> checking /dev/sgd... failed to open (Invalid argument)
> checking /dev/sge... failed to open (Invalid argument)
> checking /dev/sgf... failed to open (Invalid argument)
> checking /dev/sgg... failed to open (Invalid argument)
> checking /dev/sgh... failed to open (Invalid argument)
> checking /dev/sgi... failed to open (Invalid argument)
> checking /dev/sgj... failed to open (Invalid argument)
> checking /dev/sgk... failed to open (Invalid argument)
> checking /dev/sgl... failed to open (Invalid argument)
> checking /dev/sgm... failed to open (Invalid argument)
> checking /dev/sgn... failed to open (Invalid argument)
> checking /dev/sgo... failed to open (Invalid argument)
> checking /dev/sgp... failed to open (Invalid argument)
> checking /dev/sgq... failed to open (Invalid argument)
> checking /dev/sgr... failed to open (Invalid argument)
> checking /dev/sgs... failed to open (Invalid argument)
> checking /dev/sgt... failed to open (Invalid argument)
> checking /dev/sgu... failed to open (Invalid argument)
> checking /dev/sgv... failed to open (Invalid argument)
> checking /dev/sgw... failed to open (Invalid argument)
> checking /dev/sgx... failed to open (Invalid argument)
> checking /dev/sgy... failed to open (Invalid argument)
> checking /dev/sgz... failed to open (Invalid argument)
> # No SCSI scanners found. If you expected something different, make sure
> that # you have loaded a kernel SCSI driver for your SCSI adapter.
>
> searching for USB scanners:
> checking /dev/usb/scanner... failed to open (Invalid argument)
> checking /dev/usb/scanner0... failed to open (Invalid argument)
> checking /dev/usb/scanner1... failed to open (Invalid argument)
> checking /dev/usb/scanner2... failed to open (Invalid argument)
> checking /dev/usb/scanner3... failed to open (Invalid argument)
> checking /dev/usb/scanner4... failed to open (Invalid argument)
> checking /dev/usb/scanner5... failed to open (Invalid argument)
> checking /dev/usb/scanner5... failed to open (Invalid argument)
> checking /dev/usb/scanner7... failed to open (Invalid argument)
> checking /dev/usb/scanner8... failed to open (Invalid argument)
> checking /dev/usb/scanner9... failed to open (Invalid argument)
> checking /dev/usb/scanner10... failed to open (Invalid argument)
> checking /dev/usb/scanner11... failed to open (Invalid argument)
> checking /dev/usb/scanner12... failed to open (Invalid argument)
> checking /dev/usb/scanner13... failed to open (Invalid argument)
> checking /dev/usb/scanner14... failed to open (Invalid argument)
> checking /dev/usb/scanner15... failed to open (Invalid argument)
> checking /dev/usbscanner... failed to open (Invalid argument)
> checking /dev/usbscanner0... failed to open (Invalid argument)
> checking /dev/usbscanner1... failed to open (Invalid argument)
> checking /dev/usbscanner2... failed to open (Invalid argument)
> checking /dev/usbscanner3... failed to open (Invalid argument)
> checking /dev/usbscanner4... failed to open (Invalid argument)
> checking /dev/usbscanner5... failed to open (Invalid argument)
> checking /dev/usbscanner6... failed to open (Invalid argument)
> checking /dev/usbscanner7... failed to open (Invalid argument)
> checking /dev/usbscanner8... failed to open (Invalid argument)
> checking /dev/usbscanner9... failed to open (Invalid argument)
> checking /dev/usbscanner10... failed to open (Invalid argument)
> checking /dev/usbscanner11... failed to open (Invalid argument)
> checking /dev/usbscanner12... failed to open (Invalid argument)
> checking /dev/usbscanner13... failed to open (Invalid argument)
> checking /dev/usbscanner14... failed to open (Invalid argument)
> checking /dev/usbscanner15... failed to open (Invalid argument)
> trying libusb:
>
> <device descriptor of 0x0000/0x0000 at 002:001>
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x0000
> idProduct 0x0000
> bcdDevice 2.06
> iManufacturer 3 ((null))
> iProduct 2 ((null))
> iSerialNumber 1 ((null))
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 2
> bInterval 255 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x03f0/0x0705 at 001:003>
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 8
> idVendor 0x03F0
> idProduct 0x0705
> bcdDevice 1.00
> iManufacturer 4 ((null))
> iProduct 3 ((null))
> iSerialNumber 5 ((null))
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 39
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 6 ((null))
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 0
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 7 ((null))
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 (out 0x02)
> bmAttributes 2 (bulk)
> wMaxPacketSize 8
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 2>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 (in 0x03)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 1
> bInterval 250 ms
> bRefresh 0
> bSynchAddress 0
>
> <trying to find out which USB chip is used>
> checking for GT-6801 ...
> this is not a GT-6801 (bDeviceClass = 0)
> checking for GT-6816 ...
> this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 0)
> checking for GT-8911 ...
> this is not a GT-8911 (check 1, bDeviceClass = 0, bInterfaceClass = 0)
> checking for MA-1017 ...
> this is not a MA-1017 (bcdUSB = 0x110)
> checking for MA-1015 ...
> this is not a MA-1015 (bDeviceClass = 0)
> checking for MA-1509 ...
> this is not a MA-1509 (bDeviceClass = 0)
> checking for LM983[1,2,3] ...
> this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 0)
> checking for GL646 ...
> this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 0)
> checking for GL646_HP ...
> this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 0)
> checking for GL660+GL646 ...
> this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 0)
> checking for GL841 ...
> this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 0)
> checking for ICM532B ...
> this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 0)
> checking for PV8630/LM9830 ...
> this is not a PV8630/LM9830 (bcdUSB = 0x110)
> checking for M011 ...
> this is not a M011 (bDeviceClass = 0)
> checking for RTS8822L-01H ...
> this is not a RTS8822L-01H (bEndpointAddress = 0x81, bmAttributes =
> 0x2, wMaxPacketSize = 0x40, bInterval = 0x0) checking for rts8858c ...
> Unexpected result from register reading (0x3e/0x0)
> checking for SQ113 ...
> this is not a SQ113 (bcdUSB = 0x110)
> checking for HP5550/5590/7650 chipset ...
> this is not a HP5550/5590/7650 chipset (bDeviceClass = 0)
> <Couldn't determine the type of the USB chip (result from sane-backends
> 1.0.18-cvs)>
>
> found USB scanner (vendor=0x03f0, product=0x0705) at libusb:001:003
>
> <device descriptor of 0x04d9/0x1153 at 001:002>
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 8
> idVendor 0x04D9
> idProduct 0x1153
> bcdDevice 1.00
> iManufacturer 0 ()
> iProduct 0 ()
> iSerialNumber 0 ()
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 34
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 160 (Remote Wakeup)
> MaxPower 100 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 3
> bInterfaceSubClass 1
> bInterfaceProtocol 2
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 8
> bInterval 10 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x0000/0x0000 at 001:001>
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x0000
> idProduct 0x0000
> bcdDevice 2.06
> iManufacturer 3 ((null))
> iProduct 2 ((null))
> iSerialNumber 1 ((null))
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 2
> bInterval 255 ms
> bRefresh 0
> bSynchAddress 0
> # Your USB scanner was (probably) detected. It may or may not be
> supported by # SANE. Try scanimage -L and read the backend's manpage.
>
> # Not checking for parallel port scanners.
>
> # Most Scanners connected to the parallel port or other proprietary ports
> # can't be detected by this program.
>
> # You may want to run this program as root to find all devices. Once you
> # found the scanner devices, be sure to adjust access permissions as
> # necessary.
> done
> jens at jens-desktop-ubuntu:~$
>
> '
Hello,
I see no test for RTS8891 chip in the log, I think you should try with a more
recent CVS version which should be checking for it.
Regards,
Stef
More information about the sane-devel
mailing list