[sane-devel] Formulardaten
cgi-mailer at kundenserver.de
cgi-mailer at kundenserver.de
Wed Dec 26 14:38:34 UTC 2007
===========================================
== Neuer Eintrag
===========================================
-------------------------------------------
-- Formular: 'adddev'
-------------------------------------------
1. Your email address:
'javi at shrekyfiona.cc'
2. Manufacturer (e.g. "Mustek"):
'Hewlett-Packard'
3. Model name (e.g. ScanExpress 1200UB):
'HP Scanjet G4050'
4. Bus type:
'USB'
5. Vendor id (e.g. 0x001):
'0x03f0'
6. Product id (e.g. 0x0002):
'0x4605'
7. Chipset (e.g. lm9831):
'GL841'
8. Comments (e.g. similar to Mustek 1234):
''
9. Data (e.g. sane-find-scanner -v -v):
'sane-find-scanner -v -v -F /proc/bus/usb/devices
trying to open /proc/bus/usb/devices
parsing line: `'
parsing line: `T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10'
parsing line: `B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0'
parsing line: `D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1'
Found Ver=272
Found Cls=9
Found Sub=0
Found Prot=0
Found MxPS=64
Found #Cfgs=1
parsing line: `P: Vendor=0000 ProdID=0000 Rev= 2.06'
Found Vendor=0
Found ProdID=0
Found Rev=518
parsing line: `S: Manufacturer=Linux 2.6.22-gentoo-r9 ohci_hcd'
parsing line: `S: Product=OHCI Host Controller'
parsing line: `S: SerialNumber=0000:00:02.0'
parsing line: `C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA'
Found Cfg#=1
Found Ifs=1
Found Atr=224
Found MxPwr=0
parsing line: `I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub'
Found If#=0
Found Alt=0
Found #EPs=1
Found Cls=9
Found Sub=0
Found Prot=0
parsing line: `E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms'
Found Ad=129
Found Atr=3
Found MxPS=2
Found Ivl=255
parsing line: `'
parsing line: `T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10'
<device descriptor of 0x0000/0x0000 at :>
bLength 0
bDescriptorType 0
bcdUSB 1.10
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 0 ()
iProduct 0 ()
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 0
bDescriptorType 0
wTotalLength 0
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 0
bDescriptorType 0
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 0
bDescriptorType 0
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 2
bInterval 255 ms
bRefresh 0
bSynchAddress 0
parsing line: `B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0'
parsing line: `D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1'
Found Ver=512
Found Cls=9
Found Sub=0
Found Prot=1
Found MxPS=64
Found #Cfgs=1
parsing line: `P: Vendor=0000 ProdID=0000 Rev= 2.06'
Found Vendor=0
Found ProdID=0
Found Rev=518
parsing line: `S: Manufacturer=Linux 2.6.22-gentoo-r9 ehci_hcd'
parsing line: `S: Product=EHCI Host Controller'
parsing line: `S: SerialNumber=0000:00:02.1'
parsing line: `C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA'
Found Cfg#=1
Found Ifs=1
Found Atr=224
Found MxPwr=0
parsing line: `I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub'
Found If#=0
Found Alt=0
Found #EPs=1
Found Cls=9
Found Sub=0
Found Prot=0
parsing line: `E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms'
Found Ad=129
Found Atr=3
Found MxPS=4
Found Ivl=256
parsing line: `'
parsing line: `T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0'
<device descriptor of 0x0000/0x0000 at :>
bLength 0
bDescriptorType 0
bcdUSB 2.00
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 1
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 0 ()
iProduct 0 ()
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 0
bDescriptorType 0
wTotalLength 0
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 0
bDescriptorType 0
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 0
bDescriptorType 0
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 4
bInterval 0 ms
bRefresh 0
bSynchAddress 0
parsing line: `D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1'
Found Ver=512
Found Cls=255
Found Sub=255
Found Prot=255
Found MxPS=64
Found #Cfgs=1
parsing line: `P: Vendor=03f0 ProdID=4605 Rev= 5.00'
Found Vendor=1008
Found ProdID=17925
Found Rev=1280
parsing line: `S: Manufacturer=Hewlett-Packard'
parsing line: `S: Product=HP Scanjet scanner'
parsing line: `S: SerialNumber=CN6A9A632504'
parsing line: `C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 10mA'
Found Cfg#=1
Found Ifs=1
Found Atr=192
Found MxPwr=10
parsing line: `I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)'
Found If#=0
Found Alt=0
Found #EPs=3
Found Cls=255
Found Sub=255
Found Prot=255
parsing line: `E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms'
Found Ad=129
Found Atr=2
Found MxPS=512
Found Ivl=0
parsing line: `E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms'
Found Ad=2
Found Atr=2
Found MxPS=512
Found Ivl=0
parsing line: `E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=16ms'
Found Ad=131
Found Atr=3
Found MxPS=1
Found Ivl=16
parsing line: `'
parsing line: `T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 2 Spd=480 MxCh= 4'
<device descriptor of 0x03f0/0x4605 at :>
bLength 0
bDescriptorType 0
bcdUSB 2.00
bDeviceClass 255
bDeviceSubClass 255
bDeviceProtocol 255
bMaxPacketSize0 64
idVendor 0x03F0
idProduct 0x4605
bcdDevice 5.00
iManufacturer 0 ()
iProduct 0 ()
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 0
bDescriptorType 0
wTotalLength 0
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 192 (Self-powered)
MaxPower 10 mA
<interface 0>
<altsetting 0>
bLength 0
bDescriptorType 0
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 0 ()
<endpoint 0>
bLength 0
bDescriptorType 0
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 0
bDescriptorType 0
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 0
bDescriptorType 0
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 16 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bcdUSB = 0x200)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GT-8911 ...
this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bcdUSB = 0x200)
checking for MA-1509 ...
this is not a MA-1509 (bcdUSB = 0x200)
checking for LM983[1,2,3] ...
this is not a LM983x (bcdUSB = 0x200)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GL646_HP ...
this is not a GL646_HP (bcdUSB = 0x200)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GL841 ...
<This USB chip looks like a GL841? (result from sane-backends 1.0.18)>
found USB scanner (vendor=0x03f0, product=0x4605, chip=GL841?)
parsing line: `D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1'
Found Ver=512
Found Cls=9
Found Sub=0
Found Prot=2
Found MxPS=64
Found #Cfgs=1
parsing line: `P: Vendor=050d ProdID=0233 Rev= 0.00'
Found Vendor=1293
Found ProdID=563
Found Rev=0
parsing line: `C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 2mA'
Found Cfg#=1
Found Ifs=1
Found Atr=224
Found MxPwr=2
parsing line: `I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=01 Driver=hub'
Found If#=0
Found Alt=0
Found #EPs=1
Found Cls=9
Found Sub=0
Found Prot=1
parsing line: `E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms'
Found Ad=129
Found Atr=3
Found MxPS=1
Found Ivl=256
parsing line: `I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub'
Found If#=0
Found Alt=1
Found #EPs=1
Found Cls=9
Found Sub=0
Found Prot=2
parsing line: `E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms'
Found Ad=129
Found Atr=3
Found MxPS=1
Found Ivl=256
<device descriptor of 0x050d/0x0233 at :>
bLength 0
bDescriptorType 0
bcdUSB 2.00
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 2
bMaxPacketSize0 64
idVendor 0x050D
idProduct 0x0233
bcdDevice 0.00
iManufacturer 0 ()
iProduct 0 ()
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 0
bDescriptorType 0
wTotalLength 0
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 2 mA
<interface 0>
<altsetting 0>
bLength 0
bDescriptorType 0
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 1
iInterface 0 ()
<endpoint 0>
bLength 0
bDescriptorType 0
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<altsetting 1>
bLength 0
bDescriptorType 0
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 2
iInterface 0 ()
<endpoint 0>
bLength 0
bDescriptorType 0
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 0 ms
bRefresh 0
bSynchAddress 0
'
More information about the sane-devel
mailing list