[sane-devel] No result with canon LiDE 90
stef
stef.dev at free.fr
Mon Dec 31 07:02:06 UTC 2007
Le Saturday 29 December 2007 01:16:03 Guillaume Gastebois, vous avez écrit :
> Hello,
>
> I have no result with LiDE 90. I take sane-backends CVS, and genesys in
> experimental branch. Modified genesys_devices.c as followed.
> scanimage -l gives me :
>
> "device `genesys:libusb:001:019' is a Canon LiDE 90 flatbed scanner"
>
> but scanimage -d genesys:libusb:001:019 > toto.pnm
>
> did noting !!!!!! grrr
>
> Another question : is it possible to built only genesys backend (option
> in configure ???) because building all backend is very long.....
>
> Thank you
>
> My genesys_devices.c :
>
> /** Setup table for various scanners using a Wolfson DAC
> */
> static Genesys_Frontend Wolfson[] = {
> {{0x00, 0x03, 0x05, 0x11}
> , {0x00, 0x00, 0x00}
> , {0x80, 0x80, 0x80}
> , {0x02, 0x02, 0x02}
> , {0x00, 0x00, 0x00}
> }
> , /* UMAX */
> {{0x00, 0x03, 0x05, 0x03}
> , {0x00, 0x00, 0x00}
> , {0xc8, 0xc8, 0xc8}
> , {0x04, 0x04, 0x04}
> , {0x00, 0x00, 0x00}
> }
> , /* ST12 */
> {{0x00, 0x03, 0x05, 0x21}
> , {0x00, 0x00, 0x00}
> , {0xc8, 0xc8, 0xc8}
> , {0x06, 0x06, 0x06}
> , {0x00, 0x00, 0x00}
> }
> , /* ST24 */
> {{0x00, 0x03, 0x05, 0x12}
> , {0x00, 0x00, 0x00}
> , {0xc8, 0xc8, 0xc8}
> , {0x04, 0x04, 0x04}
> , {0x00, 0x00, 0x00}
> }
> , /* MD6228/MD6471 */
> {{0x00, 0x03, 0x05, 0x02}
> , {0x00, 0x00, 0x00}
> , {0xc0, 0xc0, 0xc0}
> , {0x07, 0x07, 0x07}
> , {0x00, 0x00, 0x00}
> }
> , /* HP2400c */
> {{0x00, 0x03, 0x04, 0x02}
> , {0x00, 0x00, 0x00}
> , {0xb0, 0xb0, 0xb0}
> , {0x04, 0x04, 0x04}
> , {0x00, 0x00, 0x00}
> }
> , /* HP2300c */
> {{0x00, 0x3d, 0x08, 0x00}
> , {0x00, 0x00, 0x00}
> , {0xe1, 0xe1, 0xe1}
> , {0x93, 0x93, 0x93}
> , {0x00, 0x19, 0x06}
> }
> , /* CANONLIDE35 */
> };
>
>
> /** for setting up the sensor-specific settings:
> * Optical Resolution, number of black pixels, number of dummy pixels,
> * CCD_start_xoffset, and overall number of sensor pixels
> * registers 0x08-0x0b, 0x10-0x1d and 0x52-0x59
> */
> static Genesys_Sensor Sensor[] = {
> /* UMAX */
> {1200, 48, 64, 0, 10800, 210, 230,
> {0x01, 0x03, 0x05, 0x07}
> ,
> {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x05, 0x31, 0x2a, 0x00,
> 0x00, 0x00, 0x02}
> ,
> {0x13, 0x17, 0x03, 0x07, 0x0b, 0x0f, 0x23, 0x00, 0xc1, 0x00, 0x00,
> 0x00, 0x00}
> ,
> 1.0, 1.0, 1.0,
> NULL, NULL, NULL}
> ,
> /* Plustek OpticPro S12/ST12 */
> {600, 48, 85, 152, 5416, 210, 230,
> {0x02, 0x00, 0x06, 0x04}
> ,
> {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x2b, 0x08, 0x20, 0x2a, 0x00,
> 0x00, 0x0c, 0x03}
> ,
> {0x0f, 0x13, 0x17, 0x03, 0x07, 0x0b, 0x83, 0x00, 0xc1, 0x00, 0x00,
> 0x00, 0x00}
> ,
> 1.0, 1.0, 1.0,
> NULL, NULL, NULL}
> ,
> /* Plustek OpticPro S24/ST24 */
> {1200, 48, 64, 0, 10800, 210, 230,
> {0x0e, 0x0c, 0x00, 0x0c}
> ,
> {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x08, 0x31, 0x2a, 0x00,
> 0x00, 0x00, 0x02}
> ,
> {0x17, 0x03, 0x07, 0x0b, 0x0f, 0x13, 0x03, 0x00, 0xc1, 0x00, 0x00,
> 0x00, 0x00}
> ,
> 1.0, 1.0, 1.0,
> NULL, NULL, NULL}
> ,
> /* MD6471 */
> {1200,
> 48,
> 16, 0, 10872,
> 210, 200,
> {0x0d, 0x0f, 0x11, 0x13}
> ,
> {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x0a, 0x30, 0x2a, 0x00,
> 0x00, 0x00, 0x03}
> ,
> {0x0f, 0x13, 0x17, 0x03, 0x07, 0x0b, 0x23, 0x00, 0xc1, 0x00, 0x00,
> 0x00, 0x00}
> ,
> 2.38, 2.35, 2.34,
> NULL, NULL, NULL}
> ,
> /* HP2400c */
> {1200,
> 48,
> 15, 0, 10872, 210, 200,
> {0x14, 0x15, 0x00, 0x00}
> ,
> {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xbf, 0x08, 0x3f, 0x2a, 0x00,
> 0x00, 0x00, 0x02}
> ,
> {0x0b, 0x0f, 0x13, 0x17, 0x03, 0x07, 0x63, 0x00, 0xc1, 0x00, 0x00,
> 0x00, 0x00}
> ,
> 1.0, 1.0, 1.0,
> NULL, NULL, NULL}
> ,
> /* HP2300c */
> {600,
> 48,
> 20, 0, 5454, 210, 200,
> {0x16, 0x00, 0x01, 0x03}
> ,
> {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xb7, 0x0a, 0x20, 0x2a, 0x6a,
> 0x8a, 0x00, 0x05}
> ,
> {0x0f, 0x13, 0x17, 0x03, 0x07, 0x0b, 0x83, 0x00, 0xc1, 0x06, 0x0b,
> 0x10, 0x16}
> ,
> 2.1, 2.1, 2.1,
> NULL, NULL, NULL}
> ,
> /** for setting up the sensor-specific settings:
> * Optical Resolution, number of black pixels, number of dummy pixels,
> * CCD_start_xoffset, and overall number of sensor pixels
> * registers 0x08-0x0b, 0x10-0x1d and 0x52-0x59
> */
> /* CANOLIDE35 */
> {2400,
> /*TODO: find a good reason for keeping all three following variables*/
> 0, /*(black) 87 */
> 0, /* (dummy) 87 */
> 0, /* (startxoffset) */
> 20800, /*sensor_pixels */
> 210,
> 200,
> {0x00, 0x00, 0x00, 0x00},
> /*
> {0x04, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x02, 0x00, 0x50,
> 0x00, 0x00, 0x00, 0x00 /* TODO(these do no harm, but may be
> neccessery for CCD) */
> /* },*/
> /* {0x06, 0x13, 0x55, 0x02, 0x34, 0x04, 0x00, 0x02, 0x00, 0x50, */
> {0x06, 0x13, 0x55, 0x02, 0x34, 0x04, 0x00, 0x02, 0x00, 0x50,
> 0x00, 0x00, 0x00, 0x00 /* TODO(these do no harm, but may be
> neccessery for CCD) */
> },
> /* {0x05, 0x07, */
> {0x05, 0x07,
> 0x00, 0x00, 0x00, 0x00, /*[GB](HI|LOW) not needed for cis */
> 0x3a, 0x03,
> 0x00, /*TODO: bit7 */
> 0x00, 0x01, 0x20, 0x00 /*TODO (these do no harm, but may be
> neccessery for CCD) */
> }
> ,
> 1.0, 1.0, 1.0,
> NULL, NULL, NULL}
> };
>
> /** for General Purpose Output specific settings:
> * initial GPO value (registers 0x66-0x67/0x6c-0x6d)
> * GPO enable mask (registers 0x68-0x69/0x6e-0x6f)
> */
> static Genesys_Gpo Gpo[] = {
> /* UMAX */
> {
> {0x11, 0x00}
> ,
> {0x51, 0x20}
> ,
> }
> ,
> /* Plustek OpticPro S12/ST12 */
> {
> {0x11, 0x00}
> ,
> {0x51, 0x20}
> ,
> }
> ,
> /* Plustek OpticPro S24/ST24 */
> {
> {0x00, 0x00}
> ,
> {0x51, 0x20}
> ,
> }
> ,
> /* MD5345/MD6471 */
> {
> {0x30, 0x00}
> , /* bits 11-12 are for bipolar V-ref input voltage */
> {0xa0, 0x18}
> ,
> }
> ,
> /* HP2400C */
> {
> {0x30, 0x00}
> ,
> {0x31, 0x00}
> ,
> }
> ,
> /* HP2300C */
> {
> {0x00, 0x00}
> ,
> {0x00, 0x00}
> ,
> }
> ,
> /* CANONLIDE35 */
> {
> /* {0x81, 0x80} */
> {0x00, 0x9f}
> ,
> /* {0xef, 0x80} */
> {0xff, 0xe0}
> ,
> }
> };
>
> #define MOTOR_ST24 2
> static Genesys_Motor Motor[] = {
> /* UMAX */
> {
> 1200, /* motor base steps */
> 2400, /* maximum motor resolution */
> 1, /* maximum step mode */
> 1, /* number of power modes*/
> {{{
> 11000, /* maximum start speed */
> 3000, /* maximum end speed */
> 128, /* step count */
> 1.0, /* nonlinearity */
> },
> {
> 11000,
> 3000,
> 128,
> 1.0,
> },},},
> },
> { /* MD5345/6228/6471 */
> 1200,
> 2400,
> 1,
> 1,
> {{{
> 2000,
> 1375,
> 128,
> 0.5,
> },
> {
> 2000,
> 1375,
> 128,
> 0.5,
> },},},
> },
> { /* ST24 */
> 2400,
> 2400,
> 1,
> 1,
> {{{
> 2289,
> 2100,
> 128,
> 0.3,
> },
> {
> 2289,
> 2100,
> 128,
> 0.3,
> },},},
> },
> { /* HP 2400c */
> 1200,
> 2400,
> 1,
> 1,
> {{{
> 11000,
> 3000,
> 128,
> 1.0,
> },
> {
> 11000,
> 3000,
> 128,
> 1.0,
> },},},
> },
> { /* HP 2300c */
> 600,
> 1200,
> 1,
> 1,
> {{{
> 3200,
> 1200,
> 128,
> 0.5,
> },
> {
> 3200,
> 1200,
> 128,
> 0.5,
> },},},
> },
> { /* Canon LiDE 35 */
> 1200,
> 2400,
> 1,
> 1,
> {{{
> 3500,
> 1300,
> 60,
> 0.8,
> },
> {
> 3500,
> 1400,
> 60,
> 0.8,
> },},},
> },
> };
>
> /* here we have the various device settings...
> */
> static Genesys_Model umax_astra_4500_model = {
> "umax-astra-4500", /* Name */
> "UMAX", /* Device vendor string */
> "Astra 4500", /* Device model name */
> GENESYS_GL646,
> NULL,
>
> {1200, 600, 300, 150, 75, 0}, /* possible x-resolutions */
> {2400, 1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */
> {16, 8, 0}, /* possible depths in gray mode */
> {16, 8, 0}, /* possible depths in color mode */
>
> SANE_FIX (3.5), /* Start of scan area in mm (x) */
> SANE_FIX (7.5), /* Start of scan area in mm (y) */
> SANE_FIX (218.0), /* Size of scan area in mm (x) */
> SANE_FIX (299.0), /* Size of scan area in mm (y) */
>
> SANE_FIX (0.0), /* Start of white strip in mm (y) */
> SANE_FIX (1.0), /* Start of black mark in mm (x) */
>
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
>
> SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
>
> 0, 8, 16, /* RGB CCD Line-distance correction in pixel */
>
> COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
>
> SANE_FALSE, /* Is this a CIS scanner? */
> CCD_UMAX,
> DAC_WOLFSON_UMAX,
> GPO_UMAX,
> MOTOR_UMAX,
> GENESYS_FLAG_UNTESTED, /* Which flags are needed for this scanner? */
> /* untested, values set by hmg */
> 20,
> 200
> };
>
> static Genesys_Model canon_lide_50_model = {
> "canon-lide-50", /* Name */
> "Canon", /* Device vendor string */
> "LiDE 35/40/50", /* Device model name */
> GENESYS_GL841,
> NULL,
>
> {1200, 600, 300, 150, 75, 0}, /* possible x-resolutions */
> {2400, 1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */
> {16, 8, 0}, /* possible depths in gray mode */
> {16, 8, 0}, /* possible depths in color mode */
>
> SANE_FIX (0.42), /* Start of scan area in mm (x) */
> SANE_FIX (7.9), /* Start of scan area in mm (y) */
> SANE_FIX (218.0), /* Size of scan area in mm (x) */
> SANE_FIX (299.0), /* Size of scan area in mm (y) */
>
> SANE_FIX (3.0), /* Start of white strip in mm (y) */
> SANE_FIX (0.0), /* Start of black mark in mm (x) */
>
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
>
> SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
>
> 0, 0, 0, /* RGB CCD Line-distance correction in pixel */
>
> COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
>
> SANE_TRUE, /* Is this a CIS scanner? */
> CCD_CANONLIDE35,
> DAC_CANONLIDE35,
> GPO_CANONLIDE35,
> MOTOR_CANONLIDE35,
> GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_SKIP_WARMUP |
> GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_DARK_WHITE_CALIBRATION,
> /* Which flags are needed for this scanner? */
> 280,
> 400
> };
>
> static Genesys_Model canon_lide_60_model = {
> "canon-lide-60", /* Name */
> "Canon", /* Device vendor string */
> "LiDE 60", /* Device model name */
> GENESYS_GL841,
> NULL,
>
> {1200, 600, 300, 150, 75, 0}, /* possible x-resolutions */
> {2400, 1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */
> {16, 8, 0}, /* possible depths in gray mode */
> {16, 8, 0}, /* possible depths in color mode */
>
> SANE_FIX (0.42), /* Start of scan area in mm (x) */
> SANE_FIX (7.9), /* Start of scan area in mm (y) */
> SANE_FIX (218.0), /* Size of scan area in mm (x) */
> SANE_FIX (299.0), /* Size of scan area in mm (y) */
>
> SANE_FIX (3.0), /* Start of white strip in mm (y) */
> SANE_FIX (0.0), /* Start of black mark in mm (x) */
>
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
>
> SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
>
> 0, 0, 0, /* RGB CCD Line-distance correction in pixel */
>
> COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
>
> SANE_TRUE, /* Is this a CIS scanner? */
> CCD_CANONLIDE35,
> DAC_CANONLIDE35,
> GPO_CANONLIDE35,
> MOTOR_CANONLIDE35,
> GENESYS_FLAG_LAZY_INIT
>
> | GENESYS_FLAG_SKIP_WARMUP
> | GENESYS_FLAG_OFFSET_CALIBRATION
> | GENESYS_FLAG_DARK_WHITE_CALIBRATION, /* Which flags are needed for
>
> this scanner? */
> 300,
> 400
> }; /* this is completely untested -- hmg */
>
> static Genesys_Model canon_lide_90_model = {
> "canon-lide-90", /* Name */
> "Canon", /* Device vendor string */
> "LiDE 90", /* Device model name */
> GENESYS_GL841,
> NULL,
>
> {1200, 600, 300, 150, 75, 0}, /* possible x-resolutions */
> {2400, 1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */
> {16, 8, 0}, /* possible depths in gray mode */
> {16, 8, 0}, /* possible depths in color mode */
>
> SANE_FIX (0.42), /* Start of scan area in mm (x) */
> SANE_FIX (7.9), /* Start of scan area in mm (y) */
> SANE_FIX (218.0), /* Size of scan area in mm (x) */
> SANE_FIX (299.0), /* Size of scan area in mm (y) */
>
> SANE_FIX (3.0), /* Start of white strip in mm (y) */
> SANE_FIX (0.0), /* Start of black mark in mm (x) */
>
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
>
> SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
>
> 0, 0, 0, /* RGB CCD Line-distance correction in pixel */
>
> COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
>
> SANE_TRUE, /* Is this a CIS scanner? */
> CCD_CANONLIDE35,
> DAC_CANONLIDE35,
> GPO_CANONLIDE35,
> MOTOR_CANONLIDE35,
> GENESYS_FLAG_LAZY_INIT | GENESYS_FLAG_SKIP_WARMUP |
> GENESYS_FLAG_OFFSET_CALIBRATION | GENESYS_FLAG_DARK_WHITE_CALIBRATION,
> /* Which flags are needed for this scanner? */
> 300,
> 400
> }; /* this is completely untested -- hmg */
>
> static Genesys_Model hp2300c_model = {
> "hewlett-packard-scanjet-2300c", /* Name */
> "Hewlett Packard", /* Device vendor string */
> "ScanJet 2300c", /* Device model name */
> GENESYS_GL646,
> NULL,
>
> {600, 300, 150, 75, 0}, /* possible x-resolutions */
> {1200, 600, 300, 150, 75, 0}, /* possible y-resolutions, motor can go
> up to 1200 dpi */
> {16, 8, 0}, /* possible depths in gray mode */
> {16, 8, 0}, /* possible depths in color mode */
>
> SANE_FIX (-2.0), /* Start of scan area in mm (x_offset) */
> SANE_FIX (0.0), /* Start of scan area in mm (y_offset) */
> SANE_FIX (215.9), /* Size of scan area in mm (x) */
> SANE_FIX (295.0), /* Size of scan area in mm (y) */
>
> SANE_FIX (0.0), /* Start of white strip in mm (y) */
> SANE_FIX (1.0), /* Start of black mark in mm (x) */
>
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
>
> SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
>
> 16, 8, 0, /* RGB CCD Line-distance correction in pixel */
>
> COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
>
> SANE_FALSE, /* Is this a CIS scanner? */
> CCD_HP2300,
> DAC_WOLFSON_HP2300,
> GPO_HP2300,
> MOTOR_HP2300,
> GENESYS_FLAG_REPARK
>
> | GENESYS_FLAG_14BIT_GAMMA
> | GENESYS_FLAG_SEARCH_START
> | GENESYS_FLAG_MUST_WAIT
> | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_OFFSET_CALIBRATION,
>
> 9,
> 132
> };
>
> static Genesys_Model hp2400c_model = {
> "hewlett-packard-scanjet-2400c", /* Name */
> "Hewlett Packard", /* Device vendor string */
> "ScanJet 2400c", /* Device model name */
> GENESYS_GL646,
> NULL,
>
> {1200, 600, 300, 150, 75, 0}, /* possible x-resolutions */
> {2400, 1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */
> {16, 8, 0}, /* possible depths in gray mode */
> {16, 8, 0}, /* possible depths in color mode */
>
> SANE_FIX (3.5), /* Start of scan area in mm (x) */
> SANE_FIX (7.5), /* Start of scan area in mm (y) */
> SANE_FIX (215.9), /* Size of scan area in mm (x) */
> SANE_FIX (297.2), /* Size of scan area in mm (y) */
>
> SANE_FIX (0.0), /* Start of white strip in mm (y) */
> SANE_FIX (1.0), /* Start of black mark in mm (x) */
>
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
>
> SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
>
> 0, 8, 16, /* RGB CCD Line-distance correction in pixel */
>
> COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
>
> SANE_FALSE, /* Is this a CIS scanner? */
> CCD_HP2400,
> DAC_WOLFSON_HP2400,
> GPO_HP2400,
> MOTOR_HP2400,
> GENESYS_FLAG_UNTESTED /* not fully working yet */
>
> | GENESYS_FLAG_REPARK
> | GENESYS_FLAG_14BIT_GAMMA
> | GENESYS_FLAG_SEARCH_START
> | GENESYS_FLAG_MUST_WAIT
> | GENESYS_FLAG_DARK_CALIBRATION | GENESYS_FLAG_OFFSET_CALIBRATION,
>
> 20,
> 132
> };
>
> static Genesys_Model hp3670c_model = {
> "hewlett-packard-scanjet-3670c", /* Name */
> "Hewlett Packard", /* Device vendor string */
> "ScanJet 3670c", /* Device model name */
> GENESYS_GL646,
> NULL,
>
> {1200, 600, 300, 150, 75, 0}, /* possible x-resolutions */
> {2400, 1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */
> {16, 8, 0}, /* possible depths in gray mode */
> {16, 8, 0}, /* possible depths in color mode */
>
> SANE_FIX (3.5), /* Start of scan area in mm (x) */
> SANE_FIX (7.5), /* Start of scan area in mm (y) */
> SANE_FIX (215.9), /* Size of scan area in mm (x) */
> SANE_FIX (297.2), /* Size of scan area in mm (y) */
>
> SANE_FIX (0.0), /* Start of white strip in mm (y) */
> SANE_FIX (1.0), /* Start of black mark in mm (x) */
>
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
>
> SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
>
> 0, 8, 16, /* RGB CCD Line-distance correction in pixel */
>
> COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
>
> SANE_FALSE, /* Is this a CIS scanner? */
> CCD_UMAX,
> DAC_WOLFSON_UMAX,
> GPO_UMAX,
> MOTOR_UMAX,
> GENESYS_FLAG_UNTESTED, /* Which flags are needed for this scanner? */
> /* untested, values set by mike p. according to vendor's datasheet. */
> 20,
> 200
> };
>
> static Genesys_Model plustek_st12_model = {
> "plustek-opticpro-st12", /* Name */
> "Plustek", /* Device vendor string */
> "OpticPro ST12", /* Device model name */
> GENESYS_GL646,
> NULL,
>
> {600, 300, 150, 75, 0}, /* possible x-resolutions */
> {1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */
> {16, 8, 0}, /* possible depths in gray mode */
> {16, 8, 0}, /* possible depths in color mode */
>
> SANE_FIX (3.5), /* Start of scan area in mm (x) */
> SANE_FIX (7.5), /* Start of scan area in mm (y) */
> SANE_FIX (218.0), /* Size of scan area in mm (x) */
> SANE_FIX (299.0), /* Size of scan area in mm (y) */
>
> SANE_FIX (0.0), /* Start of white strip in mm (y) */
> SANE_FIX (1.0), /* Start of black mark in mm (x) */
>
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
>
> SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
>
> 0, 8, 16, /* RGB CCD Line-distance correction in pixel */
>
> COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
>
> SANE_FALSE, /* Is this a CIS scanner? */
> CCD_ST12,
> DAC_WOLFSON_ST12,
> GPO_ST12,
> MOTOR_UMAX,
> GENESYS_FLAG_UNTESTED | GENESYS_FLAG_14BIT_GAMMA, /* Which flags are
> needed for this scanner? */
> 20,
> 200
> };
>
> static Genesys_Model plustek_st24_model = {
> "plustek-opticpro-st24", /* Name */
> "Plustek", /* Device vendor string */
> "OpticPro ST24", /* Device model name */
> GENESYS_GL646,
> NULL,
>
> {1200, 600, 300, 150, 75, 0}, /* possible x-resolutions */
> {2400, 1200, 600, 300, 150, 75, 0}, /* possible y-resolutions */
> {16, 8, 0}, /* possible depths in gray mode */
> {16, 8, 0}, /* possible depths in color mode */
>
> SANE_FIX (3.5), /* Start of scan area in mm (x) */
> SANE_FIX (7.5), /* Start of scan area in mm (y) */
> SANE_FIX (218.0), /* Size of scan area in mm (x) */
> SANE_FIX (299.0), /* Size of scan area in mm (y) */
>
> SANE_FIX (0.0), /* Start of white strip in mm (y) */
> SANE_FIX (1.0), /* Start of black mark in mm (x) */
>
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (x) */
> SANE_FIX (0.0), /* Start of scan area in TA mode in mm (y) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (x) */
> SANE_FIX (100.0), /* Size of scan area in TA mode in mm (y) */
>
> SANE_FIX (0.0), /* Start of white strip in TA mode in mm (y) */
>
> 0, 8, 16, /* RGB CCD Line-distance correction in pixel */
>
> COLOR_ORDER_BGR, /* Order of the CCD/CIS colors */
>
> SANE_FALSE, /* Is this a CIS scanner? */
> CCD_ST24,
> DAC_WOLFSON_ST24,
> GPO_ST24,
> MOTOR_ST24,
> GENESYS_FLAG_UNTESTED
>
> | GENESYS_FLAG_14BIT_GAMMA
> | GENESYS_FLAG_LAZY_INIT
> | GENESYS_FLAG_USE_PARK
> | GENESYS_FLAG_SKIP_WARMUP
> | GENESYS_FLAG_SEARCH_START | GENESYS_FLAG_OFFSET_CALIBRATION,
>
> 20,
> 200
> };
>
> static Genesys_Model medion_md5345_model = {
> "medion-md5345-model", /* Name */
> "Medion", /* Device vendor string */
> "MD5345/MD6228/MD6471", /* Device model name */
> GENESYS_GL646,
> NULL,
>
> {1200, 600, 300, 200, 150, 100, 75, 50, 0}, /* possible x-resolutions */
> {2400, 1200, 600, 500, 400, 300, 250, 200, 150, 100, 50, 0}, /*
> possible y-resolutions */
> {16, 8, 0}, /* possible depths in gray mode */
> {16, 8, 0}, /* possible depths in color mode */
>
> SANE_FIX (1.00), /* Start of scan area in mm (x) */
> SANE_FIX (5.00), /* 2.79 < Start of scan area in mm (y) */
> SANE_FIX (215.9), /* Size of scan area in mm (x) */
> SANE_FIX (296.4), /* Size of scan area in mm (y) */
>
> SANE_FIX (0.00), /* Start of white strip in mm (y) */
> SANE_FIX (0.00), /* Start of black mark in mm (x) */
>
> SANE_FIX (0.00), /* Start of scan area in TA mode in mm (x) */
> SANE_FIX (0.00), /* Start of scan area in TA mode in mm (y) */
> SANE_FIX (0.00), /* Size of scan area in TA mode in mm (x) */
> SANE_FIX (0.00), /* Size of scan area in TA mode in mm (y) */
>
> SANE_FIX (0.00), /* Start of white strip in TA mode in mm (y) */
>
> 48, 24, 0, /* RGB CCD Line-distance correction in pixel */
>
> COLOR_ORDER_RGB, /* Order of the CCD/CIS colors */
>
> SANE_FALSE, /* Is this a CIS scanner? */
> CCD_5345,
> DAC_WOLFSON_5345,
> GPO_5345,
> MOTOR_5345,
> GENESYS_FLAG_14BIT_GAMMA
>
> | GENESYS_FLAG_LAZY_INIT
> | GENESYS_FLAG_USE_PARK
> | GENESYS_FLAG_SKIP_WARMUP
> | GENESYS_FLAG_SEARCH_START
> | GENESYS_FLAG_DARK_CALIBRATION
> | GENESYS_FLAG_STAGGERED_LINE | GENESYS_FLAG_OFFSET_CALIBRATION,
>
> 32,
> 200
> };
>
> static Genesys_USB_Device_Entry genesys_usb_device_list[] = {
> {0x0638, 0x0a10, &umax_astra_4500_model},
> {0x04a9, 0x2213, &canon_lide_50_model},
> {0x04a9, 0x221c, &canon_lide_60_model},
> {0x04a9, 0x1900, &canon_lide_90_model},
> {0x03f0, 0x0901, &hp2300c_model},
> {0x03f0, 0x0a01, &hp2400c_model},
> {0x03f0, 0x1405, &hp3670c_model},
> {0x07b3, 0x0600, &plustek_st12_model},
> {0x07b3, 0x0601, &plustek_st24_model},
> {0x0461, 0x0377, &medion_md5345_model},
> {0, 0, NULL}
> };
Hello,
before anything works, you'll have to describe your model in
genesys_devices.c . A start would be to copy and modify entry for lide 60.
You'll have to tune the values by extracting USB logs under windows.
To build only the genesys backend, configure your build envrionnement by
something like:
BACKENDS="genesys" ./configure --prefix=/usr --sysconfdir=/etc
Where BACKENDS holds the list of wanted backends.
Regards,
Stef
More information about the sane-devel
mailing list