[sane-devel] Adding Scanner to Backend Configuration

[Stéphane VOLTZ]

Le mardi 15 mai 2007, Hugh McMaster a écrit :
> Hi Gerald,
>
> On 12/05/07, Gerald Murray wrote:
> > The chipset in the Canon Lide 70 is not yet known, but it did not respond
> > positively to gl841 or gl646, so it is will not at present work with the
> > genesys backend.  It has only 2 bulk endpoints, but no isosynchronous
> > endpoint, so it is different.  Some work is required to identify the
> > chip, and the protocol.  Using usbsnoop on a small scan may provide
> > helpful information.  In any case, quite a bit of work lies between now
> > and a successful sane scan.  I suggest obtaining a usbsnoop log and/or
> > identifying the chipset.  The recompile is not likely to work or provide
> > useful information,
> > in my humble opinion.  Someone needs to initiage and carry that project
> > forward into development.
>
> Where should I submit the usbsnoop log to?
>
> Hugh


	Hello,

	you can either put it on some site and give us the URL, or send it directly 
to me if it is smaller than about 10MB when compressed. I'll try to look if 
it is close the gl646.

Regards,
	Stef