[sane-devel] Saned problem

[Wouter van Marle]

On 24 May 07, at 4:58, Jochen Eisinger wrote:

> Hi,
>
> Wouter van Marle wrote:
>> However doing the same as user, doesn't detect the scanner.
> looks as if the usb device doesn't have the correct access rights.

What I forgot to tell, printing works fine (same device: it's a 
printer/scanner/copier combi) and as said, when running saned in debug 
mode (saned -d) it also works fine! Just that it quits after the first 
connection of course. But the scanner is detected correctly both 
locally and over the network. So I'm pretty sure the port permissions 
are OK. I suspect the combination with inetd that is the problem.

Snippet of /proc/bus/usb/devices:
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=04b8 ProdID=080e Rev= 1.00
S:  Manufacturer=EPSON
S:  Product=USB MFP
S:  SerialNumber=NB0198001040354410
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

# scanimage -L
device `epson:libusb:001:002' is a Epson CX3600 flatbed scanner

# ls -l /proc/bus/usb/001/002:
-rw-rw-rw- 1 root root 73 2007-05-17 13:56 002

Permissions seem OK to me...

Wouter.

>
> I'm not sure where it's mounted on debian, either /proc/bus/usb/aaa/bbb
> where aaa and bbb are the values in epson:libusb:aaa:bbb or 
> /dev/usb/aaa/bbb
>
> regards
> -- jochen
>
>