[sane-devel] Problems in ARM (atmel) linux - Travelscan 662 (sane-plustek)

[Saravana Krishnamurthy]

I'm using the current version. So I wasn't able to apply the patch using the "patch "
utility. However, I manually edited the plustek-usb.h file to refect the changes in the patch that allan provided. It doesn't help. I still have the same issue.
 
Gerhard,
Should I use the latest version from CVS? (ie 1.0.18?).
 
thanks
-sk 
 
----- Original Message -----
From: Gerhard Jaeger 
Sent: Mon, 11/26/2007 11:30pm
To: sane-devel at lists.alioth.debian.org
Cc: m. allan noah ; saravakr at cisco.com
Subject: Re: [sane-devel] Problems in ARM (atmel) linux - Travelscan 662 (sane-plustek) 
 
 
Am Dienstag, 27. November 2007 03:05:44 schrieb m. allan noah:
> sounds like somewhere there is an array of 3-byte R,G,B structs, which
> will be padded on arm to 4 bytes. this problem was discovered by DAKA
> and myself when building sane for the nslu2/openembedded platform. the
> attached patch added some packing directives to correct the issue, but
> this was sane 1.0.17, not current.
> 
Hi,

you are right, this is the problem, in CVS should be a corrected
version, but I had no chance to test it on my SLUG.

Let us know if Allans patch helps and/or try the CVS version
and tell us if this works too...

TIA
Gerhard