[sane-devel] Formulardaten
cgi-mailer at kundenserver.de
cgi-mailer at kundenserver.de
Fri Oct 26 13:46:34 UTC 2007
===========================================
== Neuer Eintrag
===========================================
-------------------------------------------
-- Formular: 'adddev'
-------------------------------------------
1. Your email address:
'gerard at gkall.hobby.nl'
2. Manufacturer (e.g. "Mustek"):
'Dell'
3. Model name (e.g. ScanExpress 1200UB):
'810'
4. Bus type:
'USB'
5. Vendor id (e.g. 0x001):
'0x413c'
6. Product id (e.g. 0x0002):
'0x5118'
7. Chipset (e.g. lm9831):
''
8. Comments (e.g. similar to Mustek 1234):
''
9. Data (e.g. sane-find-scanner -v -v):
'AIO 810
Manufacturer: Dell
Serial Number: GX0PH81
Speed: 12Mb/s (full)
USB Version: 2.00
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 64
Number of Configurations: 1
Vendor Id: 413c
Product Id: 5118
Revision Number: 0.01
Config Number: 1
Number of Interfaces: 3
Attributes: c0
MaxPower Needed: 10mA
Interface Number: 0
Name: (none)
Alternate Number: 0
Class: ff(vend.)
Sub Class: ff
Protocol: ff
Number of Endpoints: 2
Endpoint Address: 83
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 06
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Interface Number: 1
Name: usblp
Alternate Number: 0
Class: 07(print)
Sub Class: 01
Protocol: 02
Number of Endpoints: 2
Endpoint Address: 85
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 32
Interval: 0ms
Endpoint Address: 02
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Interface Number: 2
Name: usbhid
Alternate Number: 0
Class: 03(HID )
Sub Class: 00
Protocol: 00
Number of Endpoints: 1
Endpoint Address: 87
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 16ms
<device descriptor of 0x413c/0x5118 at 004:002 (Dell AIO 810)>
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x413C
idProduct 0x5118
bcdDevice 0.01
iManufacturer 1 (Dell)
iProduct 2 ( AIO 810)
iSerialNumber 3 (GX0PH81)
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 80
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 6 (SCANIN=0x00 BI=0x83 BO=0x06;)
bmAttributes 192 (Self-powered)
MaxPower 10 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 4 (AIO 810)
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x06 (out 0x06)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<interface 1>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 7
bInterfaceSubClass 1
bInterfaceProtocol 2
iInterface 5 (Printer Interface)
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 (in 0x05)
bmAttributes 2 (bulk)
wMaxPacketSize 32
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 64
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<interface 2>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 (in 0x07)
bmAttributes 3 (interrupt)
wMaxPacketSize 8
bInterval 16 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bDeviceClass = 0)
checking for GT-6816 ...
this is not a GT-6816 (bcdUSB = 0x200)
checking for GT-8911 ...
this is not a GT-8911 (check 2, bcdUSB = 0x200)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bDeviceClass = 0)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceClass = 0)
checking for LM983[1,2,3] ...
this is not a LM983x (bcdUSB = 0x200)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL646_HP ...
this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL84x ...
this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
checking for ICM532B ...
this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
checking for PV8630/LM9830 ...
this is not a PV8630/LM9830 (bcdUSB = 0x200)
checking for M011 ...
this is not a M011 (bDeviceClass = 0)
checking for RTS8822L-01H ...
this is not a RTS8822L-01H (bNumEndpoints = 2)
checking for rts8858c ...
this is not a rts8858c (bcdUSB = 0x200)
checking for SQ113 ...
this is not a SQ113 (bNumEndpoints = 2)
checking for HP5550/5590/7650 chipset ...
this is not a HP5550/5590/7650 chipset (bDeviceClass = 0)
<Couldn't determine the type of the USB chip (result from sane-backends 1.0.18-cvs)>
found USB scanner (vendor=0x413c [Dell], product=0x5118 [ AIO 810]) at libusb:004:002
'
More information about the sane-devel
mailing list