[sane-devel] New entry for libsane.usermap

Bertrik Sikken bertrik at sikken.nl
Wed Oct 31 18:08:26 UTC 2007

Micirio wrote:
> Hello,
> I've installed my "HP psc 1110 all-in-one" scanner/printer following this  
> howto:
> http://gentoo-wiki.com/HOWTO_Installing_USB_Scanner
> I had to add a line in /etc/hotplug/usb/libsane.usermap manually and the  
> howto says
> that I should report it in the sane-devel list. So that's what I'm doing  
> now ;-)
> I added this line and scanning works just fine:
> libusbscanner 0x0003 0x03f0 0x3011 0x0000 0x0000 0x00 0x00 0x00 0x00 0x00  
> 0x00 0x00000000
> lsusb says:
> Bus 002 Device 004: ID 03f0:3011 Hewlett-Packard
> I can also paste the lsusb -v output if you need it.

I'd like to help add this to sane cvs, but I don't quite know how.

As far as I understand I can add it to a .desc file so the sane build
process will automatically add it to the udev libsane.rules file.

What backend do you use for your scanner?

Kind regards,

More information about the sane-devel mailing list