[sane-devel] RICOH IS450, was: Formulardaten

[m. allan noah]

On 9/6/07, cgi-mailer at kundenserver.de <cgi-mailer at kundenserver.de> wrote:
> 1. Your email address:
>    'jeremy at acjlaw.net'
> 2. Manufacturer (e.g. "Mustek"):
>    'Ricoh'
> 3. Model name (e.g. ScanExpress 1200UB):
>    'IS450DE'
> 4. Bus type:
>    'SCSI'
> 5. Vendor id (e.g. 0x001):
>    ''
> 6. Product id (e.g. 0x0002):
>    ''
> 7. Chipset (e.g. lm9831):
>    ''
> 8. Comments (e.g. similar to Mustek 1234):
>    'I have a Ricoh Image Scanner IS450DE (Duplex with an Endorser) similar to the IS450 (Simplex without Endorser) and IS450SE. It's a SCSI-2 scanner with a flat bed and ADF and scans up to 11X17in (Ledger) @ 400dpiX400dpi in 256 shades of gray. It's not listed on your list of supported scanners, although the IS420/IS430 models have BASIC support. I was hoping that the scanning functionality of this model would be similar and might be recognized by the ibm sane-backend, but no such luck! The Endorser and Image Processing Unit are not critical to me. If I can get raw pnm output I can manipulate the images using my netpbm bash scripts.'
> 9. Data (e.g. sane-find-scanner -v -v):
>    '#cat /proc/scsi/scsi
> Host: scsi0 Channel: 00 Id: 05 Lun: 00
> Vendor: RICOH    Model: IS450            Rev: 1R04
> Type:   Scanner                          ANSI SCSI revision: 02
>
> # scsi_info /dev/sg0
> SCSI_ID="0,5,0"
> HOST="0"
> MODEL="RICOH IS450"
> FW_REV="1R04"'
>
>

join the sane mailing list, and start a discussion. as a first stab-
you could try getting a debug log of the ibm backend in action:

SANE_DEBUG_IBM=11 scanimage -L

allan

-- 
"The truth is an offense, but not a sin"