[sane-devel] Formulardaten

[cgi-mailer at kundenserver.de]

===========================================
== Neuer Eintrag
===========================================

      
-------------------------------------------
-- Formular: 'adddev'
-------------------------------------------

1. Your email address:
   'david.hince at yahoo.ca'
2. Manufacturer (e.g. "Mustek"):
   'Hewlett-Packard'
3. Model name (e.g. ScanExpress 1200UB):
   'Scanjet G4050'
4. Bus type:
   'USB'
5. Vendor id (e.g. 0x001):
   '0x03f0'
6. Product id (e.g. 0x0002):
   '0x4605'
7. Chipset (e.g. lm9831):
   'GL843'
8. Comments (e.g. similar to Mustek 1234):
   'New report with latest cvs sane-backends'
9. Data (e.g. sane-find-scanner -v -v):
   'This is sane-find-scanner from sane-backends 1.0.19-cvs

[...]

trying libusb:

[...]

<device descriptor of 0x03f0/0x4605 at 001:002 (Hewlett-Packard HP Scanjet scanner)>
bLength               18
bDescriptorType       1
bcdUSB                2.00
bDeviceClass          255
bDeviceSubClass       255
bDeviceProtocol       255
bMaxPacketSize0       64
idVendor              0x03F0
idProduct             0x4605
bcdDevice             5.00
iManufacturer         1 (Hewlett-Packard)
iProduct              2 (HP Scanjet scanner)
iSerialNumber         12 (CN7B1A63Y805)
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         39
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         192 (Self-powered)
 MaxPower             10 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      3
   bInterfaceClass    255
   bInterfaceSubClass 255
   bInterfaceProtocol 255
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    512
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x02 (out 0x02)
    bmAttributes      2 (bulk)
    wMaxPacketSize    512
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 2>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x83 (in 0x03)
    bmAttributes      3 (interrupt)
    wMaxPacketSize    1
    bInterval         8 ms
    bRefresh          0
    bSynchAddress     0

<trying to find out which USB chip is used>
    checking for GT-6801 ...
    this is not a GT-6801 (bcdUSB = 0x200)
    checking for GT-6816 ...
    this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for GT-8911 ...
    this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass = 255)
    checking for MA-1017 ...
    this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for MA-1015 ...
    this is not a MA-1015 (bcdUSB = 0x200)
    checking for MA-1509 ...
    this is not a MA-1509 (bcdUSB = 0x200)
    checking for LM983[1,2,3] ...
    this is not a LM983x (bcdUSB = 0x200)
    checking for GL646 ...
    this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for GL646_HP ...
    this is not a GL646_HP (bcdUSB = 0x200)
    checking for GL660+GL646 ...
    this is not a GL660+GL646 (bDeviceClass = 255, bInterfaceClass = 255)
    checking for GL84x ...
<This USB chip looks like a GL843 (result from sane-backends 1.0.19-cvs)>

found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x4605 [HP Scanjet scanner], chip=GL843) at libusb:001:002'