[sane-devel] HP 5580 suport

[tobias alarcon]

I download sane-backends-1.0.19.tar.gz and install it.
and run like you said. It works fine. I wonder why doesn't work with
rpm package.
thanks.

On Thu, Feb 21, 2008 at 2:39 PM, m. allan noah <kitno455 at gmail.com> wrote:
> clue? yes. run the command i told you, with the 5590 in it.
>
>  allan
>
>
>
>  On Thu, Feb 21, 2008 at 12:11 PM, tobias alarcon <extobias at gmail.com> wrote:
>  > i get this when with scanimage -L
>  >
>  >  root at localhost ~]# scanimage -L
>  >  [sanei_debug] Setting debug level of hp to 20.
>  >  [hp] sane_init called
>  >  [hp] hp_init: global.is_up = 1
>  >  [hp] sane_init will finish with Success
>  >  [hp] sane_get_devices called
>  >  [hp] hp_read_config: hp backend v1.06/$Revision: 1.21 $ starts reading
>  >  config file
>  >  [hp] hp_read_config: processing line <#scsi HP>
>  >  [hp] hp_read_config: processing line <# Uncomment the following if you
>  >  have "Error during device I/O" on SCSI>
>  >  [hp] hp_read_config: processing line <#   option dumb-read>
>  >  [hp] hp_read_config: processing line <#>
>  >  [hp] hp_read_config: processing line <# The usual place for a
>  >  SCSI-scanner on Linux>
>  >  [hp] hp_read_config: processing line <#/dev/scanner>
>  >  [hp] hp_read_config: processing line <#>
>  >  [hp] hp_read_config: processing line <# USB-scanners supported by the
>  >  hp-backend>
>  >  [hp] hp_read_config: processing line <# HP ScanJet 4100C>
>  >  [hp] hp_read_config: processing line <usb 0x03f0 0x0101>
>  >  [hp] hp_read_config: processing line <# HP ScanJet 5200C>
>  >  [hp] hp_read_config: processing line <usb 0x03f0 0x0401>
>  >  [hp] hp_attach_matching_devices: usb attach matching "usb 0x03f0 0x0101"
>  >  [hp] hp_read_config: processing line <# HP ScanJet 62X0C>
>  >  [hp] hp_read_config: processing line <usb 0x03f0 0x0201>
>  >  [hp] hp_attach_matching_devices: usb attach matching "usb 0x03f0 0x0401"
>  >  [hp] hp_read_config: processing line <# HP ScanJet 63X0C>
>  >  [hp] hp_read_config: processing line <usb 0x03f0 0x0601>
>  >  [hp] hp_attach_matching_devices: usb attach matching "usb 0x03f0 0x0201"
>  >  [hp] hp_read_config: processing line <>
>  >  [hp] hp_read_config: processing line <# Uncomment the following if
>  >  your scanner is connected by USB,>
>  >  [hp] hp_read_config: processing line <# but you are not using libusb>
>  >  [hp] hp_read_config: processing line <# /dev/usb/scanner0>
>  >  [hp] hp_read_config: processing line <#   option connect-device>
>  >  [hp] hp_read_config: attach usb 0x03f0 0x0601
>  >  [hp] hp_attach_matching_devices: usb attach matching "usb 0x03f0 0x0601"
>  >  [hp] hp_read_config: reset to default config
>  >  [hp] sane_get_devices will finish with Success
>  >
>  >  No scanners were identified. If you were expecting something different,
>  >  check that the scanner is plugged in, turned on and detected by the
>  >  sane-find-scanner tool (if appropriate). Please read the documentation
>  >  which came with this software (README, FAQ, manpages).
>  >  [hp] sane_exit called
>  >  [hp] hp_destroy: global.is_up = 0
>  >  [hp] sane_exit will finish
>  >
>  >  any clue?
>  >
>
>
>
>
>
> --
>  "The truth is an offense, but not a sin"
>